With room for seven to eight passengers with second and third row seats that can be folded flat, the Odyssey gives you a ton of space versatility. To take on even the largest weekend project, fold all the seats down and make room on the floor for a stack of 4’x8″ plywood panels.
In This Article...
Which vehicle can accommodate a 4×8 plywood sheet?
A rear-wheel drive, 7-speed automated, 2.0L four-cylinder gasoline engine with 208 horsepower and 258 pound-feet of torque is an option for the Metris mid-sized commercial cargo van. The cargo van has a 4,960-pound towing capacity and a cargo space of 186 cubic feet, which is large enough to accommodate 75 sheets of 4 x 8 plywood. With a turning radius of 38.7 inches and a height of 75.2 inches, it can fit in most suburban spaces, including parking garages.
Side doors slide open to a maximum of 37.8 inches. Standard 270-degree and 180-degree opening rear doors as well as a single flip-up tailgate are the two alternatives for the back doors.
The powertrain application offers a service interval of up to 15,000 miles and optional ECO start/stop. A factory partition with an extended loading feature is also available in the cargo van.
For the Cargo Van version of the Metris, 6 airbags will be standard, in addition to ATTENTION ASSIST, Crosswind Assist, and load-adaptive ESP. Active parking assistance, lane keeping assistance, PARKTRONIC, collision prevention assistance, blind spot assistance, and a rear-view camera are all available safety features.
Can a 2021 Toyota Sienna fit a 4×8 sheet of plywood?
The sporty XSE receives black highlights and alloys, premium audio, LED daytime running lights, and a sport-tuned suspension as it moves up the trim range. Better audio, an integrated backup camera, wireless charging, chrome roof rails, and a 7-inch driver information display are added in the Limited model. The Platinum trim, which is the final one, also includes a 10-inch head-up display, 20-inch metallic wheels, a bird’s eye view camera, heated second-row seats, a heated steering wheel, and full LED headlights. All grades come with Toyota Safety Sense 2.0 as standard.
Over the course of a weekend, I had the identical green Sienna in my possession. The interior was stunning, with a cool gray woodgrain bridge, Barcalounger-like chairs, and more storage space than you could possibly need. The cargo area was empty because there were no significant family vacations planned, but Toyota did remark that a few 4×8 sheets of plywood will fit in a pinch with the seats folded and slid.
The climate control is luckily in a separate panel, and the typical 9-inch touchscreen has redundant buttons on the side. It is annoying to have to navigate through touchscreen options to turn the heat up. The digital mirror is a wonderful feature, but it takes some getting used to because it employs a camera to project what’s behind you in a larger view.
Can a Toyota Highlander fit a 4×8 sheet of plywood?
The Honda Pilot is by far the superior vehicle in terms of load capacity. It has a cargo capacity of 18.5 cubic feet behind the back seats, 55.9 cubic feet when those seats are folded, and 109.2 cubic feet when the second and third rows are folded flat. It is one of the few midsize SUVs with a flat floor that can accommodate a 4X8 plywood sheet.
Only 16 cubic feet, 48.4 cubic feet, and 84.3 cubic feet of storage space are available behind the third row, second row, and front row, respectively, of the Toyota Highlander. These numbers are actually fairly good for midsize SUVs, even though they are much lower than those of the Pilot.
What are the Honda Odyssey’s interior measurements?
Volume of All Passengers: 163.6 cubic feet. Headroom: 40.7 inches, 39.5 inches, and 38.3 inches (front, center, and back). : 40.9 inches, 40.9 inches, and 38.1 inches of legroom in the front, center, and rear. Shoulder Room: 63.1 inches, 61.6 inches, and 60.0 inches (front, middle, and rear).
Can a 4×8 piece of plywood fit inside a Toyota RAV4?
A 4′ x 8′ sheet will not fit in the car while the back door is closed and it is still safe to drive. With the little end on the center bin, an 8′ ladder will fit.
Will a Honda Ridgeline accommodate a 4×8-inch piece of plywood?
People frequently inquire, “Can a sheet of plywood fit in the rear of the Honda Ridgeline?” due to the truck’s diminutive size. Simply said, absolutely. Few other vehicles can make this claim, but Honda engineers built the Ridgeline’s cargo bed to hold a complete sheet of plywood mostly level.
Can a Pacifica accommodate a 4×8 plywood?
Vans typically offer a perfect middle ground between a truck and a car. On occasion, you require additional passenger space. You may need to be able to move a large amount of freight at other times. Can you put 4×8 pieces of plywood in a Chrysler Pacifica? is a question you could have if you’re thinking about buying a van as your next car. We measured the Chrysler Pacifica to find the solution for you.
A sheet of plywood measuring 4×8 inches can fit inside the Chrysler Pacifica. With a range of 32 cubic feet to a maximum of 140.5 cubic feet, it has a very flexible space for a van. It’s so huge you could begin to wonder what else you can use it for or even desire to test it out!
We’ll give you some ideas if you keep reading. We’ll go over the interior’s precise measurements so you can start picturing all the wonderful things you can bring on a single trip. For planning purposes, we’ll also talk about whether a couch or mattress will fit. If necessary, this article also shows you how to move the seats out of the way to maximize the amount of cargo space.
We hope the links provided are helpful to you before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
Will a Jeep Grand Cherokee accept a 4×8-inch sheet of plywood?
A 4 x 8 won’t fit because the hatch is just 6 feet behind the front seats and center console. If you were extremely careful, you might be able to fit a 4 x 6 in because it is barely 48″ on one angle at the back, but it would likely damage or gouge other objects. I always measure the length of the rear of my SUV before buying it because I frequently sleep there. I’ll have to shift one of the front seats forward to fit, but it will work for me.
Can I fit a board that is how long in a Honda Odyssey?
Honda claims that a 4×8-foot board of plywood will fit inside the Odyssey with the third-row seat folded down and the second-row seats removed.
How much cargo room does a Honda Odyssey have?
The Honda Odyssey has plenty of space for cargo. Behind the third-row seats, there is up to 38.6 cubic feet of storage space, and behind the second row, there are between 91 and 92.3 cubic feet. To access the van’s maximum cargo space, which is between 155.7 and 158 cubic feet, the center row seats must be physically taken out.
Do the seats of a Honda Odyssey fold into the floor?
This vehicle can easily and conveniently adjust to a wide range of purposes thanks to this distinctive Odyssey feature.
The Aspect:
The Odyssey can still seat five people while the third-row Magic Seat can be swiftly and simply folded into the floor to maximize cargo space.
- For better rear view, the adjustable head restraints can be tucked into the seatbacks.
- The seatback’s reclining angle is adjustable on both sides.
- To make passengers more comfortable, third-row side window sunshades are added to the Touring and Elite models.
- By pulling on the folding strap, the seat’s sides can be folded into the floor in a single, fluid action.
Is it okay to use a roof rack to transport plywood?
Even if your car’s roof rack isn’t big enough to hold 48 sheets of plywood, you still have an edge if you need to transport plywood. All you need is a method of securely supporting the plywood because the rack provides something to tie it to.
A sheet of 3/4-inch plywood weighs close to 100 pounds, so before utilizing your roof rack to transport it, make sure it can handle the weight. Don’t try it if it isn’t that strong. There is a considerable potential that you will damage your roof, permanently denting it, even if you don’t have an accident. Driving while carrying an unsafe load can result in a serious accident, or at the very least get you a misdemeanor charge and a big fine. Never overfill a roof rack because doing so might make the car unbalanced and lead to risky driving conditions.
The next procedures can be taken after confirming that your car’s roof rack is appropriate.
- Place two 8-foot-long 2” x 4” dimensional timber pieces lengthwise on the roof rack. The distance between each 2×4 should be between 3 and 3 1/2 feet.
- By tying it to the front and back crossbeams, the 2 4s are fastened to the roof rack. You might use duct tape to secure these instead of tying. That will lessen the likelihood of the 2×4 supports slipping.
- Bring along two extra pieces of 2 x 4. They will be used by you to secure the top of your load.
- Purchase your plywood, then load it carefully onto the first set of 2x4s. If you can, ask a buddy or a lumberyard employee to assist you. This will protect the paint job on your car and save your back.
- Put the extra 2x 4s in place on top of the plywood.
- To attach the entire bundle of wood to the roof rack and wrap it crosswise around the car, use strong webbed ratcheting straps. Place the straps around the bundle of wood and pass through the car’s interior through the windows or doors if your roof rack won’t allow you to do so. The buckles should be placed higher so they won’t scratch your paint.
- Place a second longitudinal ratchet strap under the rack and around the wood bundle. Don’t skip this procedure. In the event of an abrupt halt or collision, this strap will stop the wood from sliding forward or backward off the roof rack. The wood bundle separates and becomes a lethal missile even in a low-speed accident.
- Drive slowly, ideally on side streets with 55 mph or lower speed restrictions.
Can a Dodge Journey fit a 4×8 sheet of plywood?
Just so you know, the Journey has boosting posts beneath the hood that are intended for jump starting. Even though I live further north than Chicago and have had my Journey for five years, the original battery is still in it.
Just so you know, the 19″ wheels look fantastic, but the Khumo tires are terrible in the cold. Despite having AWD, we ended up purchasing winter wheels and tires.
The most adaptable vehicle for the money is a caravan. It transforms quickly from a 7-passenger people mover to a freight van that can lay a 4×8 piece of plywood flat. Journey lacks such adaptability. The Journey’s interior, in my opinion, is prettier and more car- or SUV-like. Additionally, Journey features an instrument cluster screen and an 8.4 UConnect system is available. The caravan lacks both of those.
Can a 2022 Toyota Sienna fit a 4×8 sheet of plywood?
Vehicle and Driver Fortunately, this Toyota can still transport 4×8 sheets of building supplies, with the plywood or drywall lying uncomfortably on top of the headrests of the second-row seats.