Oh no! The SRS airbag light on your Honda Civic LX may signify a problem with the airbags, seat belt sensors, or seat belt pretensioners that are part of your supplemental restraint system.
To make sure there are no problems with your safety system, check with a Honda dealer or licensed repair before you start unplugging anything to reset your SRS light. Even though dashboard lights occasionally turn on without cause, it is always preferable to have them checked out first. A Honda dealer can fix problems and provide a free diagnostic check to be sure nothing major is wrong.
While you try to figure out why your Honda Civic’s airbag light is on, Jerry can make sure you have the finest protection for both you and your vehicle. The Jerry app compares tailored rates from more than 50 of the country’s top insurers, including Nationwide and Allstate, in a matter of seconds. The typical user of Jerry saves $879 annually on auto insurance!
In This Article...
What brings on the Honda Civic’s airbag light?
A faulty occupant position sensor may cause the airbag warning light (SRS) to come on. For impacted vehicles, Honda is running a recall effort to replace faulty sensors.
What could turn on the airbag light?
The airbag light may have illuminated for any number of reasons, just like other warning lights. Here are a few of the most frequent causes:
The airbag needs resetting
The airbag light will turn on if there has been a collision but it wasn’t serious enough for the airbags to deploy. At your neighborhood garage, the airbag needs to be reset.
Corroded sensors
The sensors in your automobile may have deteriorated if it has water damage. This would lead to a malfunction in the system and turn on the airbag light.
Dislodged wiring
If your car has side airbags, the passenger side airbag may occasionally malfunction. When the passenger seat is shifted back and forth, the wires for that airbag may become damaged or displaced. We caution against attempting to reconnect a detached plug because you risk setting off the airbag. Make an appointment for your car at a nearby garage and ask them to check it.
Faulty seat belt
Your seat belt sensor can be the cause of the problem. The sensor that determines whether or not you have buckled up can malfunction occasionally. When this occurs, the airbag light can start to illuminate.
Your airbag clock spring may need replacing
The spring is intended to preserve continuity between the wiring and the driver’s airbag and coils throughout your steering wheel. The spring may wear out and fail over time, turning on the airbag warning light. Older autos are more likely to have this flaw.
The important line is that you must stop driving as soon as your airbag light illuminates and have your automobile inspected by a repair as soon as possible. Your airbags won’t activate until the issue is identified and remedied. Never disregard your airbag light since your safety and the safety of your passengers are top priorities.
How can I turn off the airbag light?
The airbag light connects the seat belt system and the airbag system as part of the Supplement Restraint System (SRS) in automobiles (and vice-versa). When you turn on your automobile, the airbag light comes on for around seven seconds before going out, signifying that the internal system check was successful and finished. When the airbag light either never turns on or stays on while blinking, an issue exists. The airbag light needs to be reset at this stage.
Examining seat belt components, fixing bad clock springs, and replacing faulty sensors are a few techniques for turning off an airbag light. New bulbs or a fully charged battery are other options. While most repairs can be done without a professional, others may.
The following 10 steps will reset your airbag light:
- Turn on and off your ignition.
- Test drive your car when it has been restarted.
- Check the airbag switch for the passenger.
- Check to see if the seat belts are in place and functioning properly.
- Check to see if the passenger seat sensor is off.
- Use a scanner with the ability to reset the SRS or airbag light.
- Fix the broken airbag sensors.
- Replace or repair a broken clock spring.
- Check to see if the airbag is working properly.
- seek for a specialist’s help.
Although not exhaustive, the list above includes tried-and-true methods for tackling the problem. Some of them might not apply to your vehicle because compatibility is always based on the year, make, and model. It is recommended that you have your service manual on hand when carrying out any of these fixes. Always follow the manufacturer’s recommendations, too. Let’s get started on resetting your airbag light right away.
What does Honda Civic SRS stand for?
The Supplemental Restraint System (SRS) Warning Light will illuminate if the system fails to function as intended or does so improperly, according to the onboard computer of the vehicle. When the computer determines the automobile has been in an accident, this system is intended to deploy air bags and tighten seat belts. To reduce the risk of fire, the battery is usually removed and the gasoline pump is usually turned off in newer makes and models. Every time the automobile is turned on, the computer immediately checks the system’s status due to its significance.
What does it cost to repair the airbag light?
The type of defect that needs to be fixed will determine how much it will cost. You might shell out between $1,100 and $1,500 to repair the airbag in the steering wheel, mostly for the labor. But if you can fix the clock spring yourself, it should only cost $250 to $350 to replace it.
Between $350 and $450 is the typical cost to repair an airbag sensor, with the parts typically costing approximately $300. If you don’t have a sophisticated code scanner, it’s advisable to have a mechanic handle the repair because the codes will need to be reset.
My airbag light is on. Is this bad?
When this light illuminates, a system issue has been found, and one or more airbags may not deploy in the event of a collision. Even while it’s feasible for all airbags to function as designed even with an SRS warning light, an airbag failure poses a serious safety risk.
How much does an airbag repair cost?
You may be wondering, “How much do airbags cost? once yours deploys. Depending on the year, make, and model of the car, the location where the airbags are installed, and whether other parts also need to be changed, the price of an airbag can change. In general, the price of a replacement airbag, including components and labor, can be between $1,000 and $5,000. Be wary of fakes when comparing pricing. These airbags might not inflate when necessary, or if they do, they might spread harmful objects. You should only purchase original equipment manufacturer (OEM) airbags from an OEM-authorized repair facility or a franchised car manufacturer dealership, according to the government website StopFakes.gov. Use cautious while purchasing replacements from nondealers and online marketplaces.
Can the airbag light be reset without a tool?
Without a scanner, most automobile models make it difficult to reset the airbag light. This is a safety warning since, when the airbag light appeared, you should always fix the problem. Fortunately, if you fix the issue, the airbag light will typically also turn off by itself in many automobile models.
However, in some older vehicles, the airbag light can be reset without a scanner by disconnecting the battery wires.
Make that there are no loose wires or rust in the connector plugs in the wiring system under the driver’s or passenger’s seat. Restart your car after spraying an electronic cleaner on the connecting plugs.
If you can’t detect any issues there, you should really invest in an OBD2 scanner or have a shop interpret the codes because otherwise you’ll have to guess what the issue is.
The airbag switch is where?
When the passenger door is open, you may access the switch for the passenger airbag on the passenger side of the instrument panel. Verify that the switch is set to the appropriate position. All front-facing passengers, including children and adults, can securely sit in the passenger seat when the airbag is ON.
Drive while the SRS light is on?
One should not ignore the airbag light or the SRS warning when they appear. It doesn’t necessary imply that the vehicle is unsafe to operate, but doing so is risky and akin to playing with fire. When this light is on, it indicates that your safety system isn’t functioning properly and, in some situations, that your airbags aren’t functional and won’t deploy in a collision.
Can I drive safely with my SRS light on? The answer is negative, as there is a significant risk if an accident were to occur, even if it is possible that the airbags may still deploy with the light on. We advise having a specialist examine it and identify the problem so that it may be corrected right away.
What distinguishes an airbag from an SRS airbag?
Head airbags (SRS) In a moderate-to-severe frontal collision, the front SRS airbags deploy to protect the driver and/or front passenger’s head and chest. The SRS (Supplemental Restraint System) designation means that the airbags are an addition to seat belts, not a substitute.
How can I check the code on my airbag light?
Diagnostic Codes for Airbags The airbag codes consist of two digits. To read the codes, count the flashes the light makes, then count them again after the pause. For instance, two flashes, a pause, and four flashes indicate a code 24 issue with your airbag system.
Which scanner can detect an airbag light being on?
Introducing the Innova CarScan Pro #5610 to start off this introduction to airbag scan tools with a bang.
Because it is the airbag scan tool with the most features available in our guide, it is listed first.
The person looking for the BEST airbag scan tools and diagnostics should use this kind of equipment.
And, to be completely honest, $329.99 is a fairly reasonable price considering the features it offers and the precision of its tests.
First off, this tool’s unique reset functions capability is one of its best qualities.
These features enable you to carry out comprehensive repairs or general maintenance using re-learn processes at the dealership level.
Additionally, this airbag scan tool features an improved data stream that enables you to monitor real-time data feeds from even complex systems like ABS, SRS, transmission, and engine.
This is a critical feature of the tool because it allows you to communicate with your car to test important features like the fuel pump’s functionality or the automatic parking brake.
In addition to these three essential features, this tool has a number of extra features, such as:
Watch this video if you want to understand more about this airbag scan tool.