Nissan included a 215/60R16 tire with the 2012 Altima Sedan 2.5 S.
In This Article...
Size, Simplified: 215-60-16
Your 2012 Nissan Altima’s original tire size is P215/60R16 94H. Below is a color-coded description of the tire size for the 2012 Nissan Altima.
The tire size was made to accommodate wheels or rims with a 16-inch diameter.
With a load index of 94, this tire can support a load that weighs no more than 1474 pounds (670 kg). A greater number indicates that the tire can support more weight. Lower values indicate the reverse.
This figure indicates that the aspect ratio of your tire is 60%. In other words, 60% of the width is represented by the sidewall height of your tire, measured from the rim’s edge to the tread. The sidewall height in this instance comes out to be 129 millimeters.
This letter indicates the design of your tire. About 99% of all tires sold today are made using the traditional manufacturing type, radial.
The highest speed that may be maintained for 10 minutes on this tire is 130 mph (210 km/h), according to its speed rating of H. A faster pace becomes risky.
On what size of a Nissan Altima can you place tires?
The majority of contemporary Nissan Altimas have tires with a diameter of 16 to 19 inches. Depending on your Altima’s year, model, and trim level, the most popular tire sizes are 215/60R16 tires, 215/55R17 tires, 235/45R18 tires, and 235/40R19 tires.
What size wheels fit the Nissan Altima?
The tire sizes for the 2020 Nissan Altima are P235/40VR19, P215/60HR16, and P215/55VR17. The wheel (rim) sizes for the 2020 Nissan Altima are 19 X 8, 16 X 7, and 17 X 7.5.
What tire pressure should a Nissan Altima have?
Are you concerned about your Nissan Altima’s tire pressure? Perhaps your low-pressure indicator lit up, but you are unsure of how much air your tires require. We looked into the matter, and the following is what we learned.
Tire pressure for your Nissan Altima should be 32 PSI. The majority of year models share the same number. Additionally, it is unaffected by the size of the tires.
You must understand how to check the levels now that you are aware of the recommended tire pressure. Continue reading to learn how to check the air in your tires, how often to check it, whether you can drive with low air pressure, and other topics.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
What is the 2013 Nissan Altima’s wheel bolt pattern?
The bolt pattern on the 2013 Nissan Altima Sedan 2.5 S is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
You should measure from the center of one lug to the outer edge of the lug farthest from it in order to obtain an accurate measurement of your five lug bolt pattern without the use of a bolt pattern tool.
On a 2012 Nissan Altima, how do you reset the tire pressure sensor?
When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset. Under the steering wheel is typically where you’ll find the reset button for the tire pressure monitor. Check the owner’s manual for your vehicle if you can’t find it.
What is a bolt pattern for a Nissan Altima?
We’ve written in-depth articles about the Nissan Altima and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the ideal replacement tires or rims for your Nissan today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
Before 2001, the Nissan Altima’s bolt pattern was 4×4.5 inches (4×114.3mm), while starting in that year, it was 5×4.5 inches (5×114.3mm). They also have a center diameter of 2.6 inches (66.1 mm) and four or five M12 x 1.25 threaded lug nuts that require 83 lb-ft of torque to tighten.
That, however, hardly captures the entire picture. For each iteration, we’ve provided a more thorough description of the bolt pattern below. We also go through the individual lugs/bolts used, the center bore hub’s exact diameter, and the bolt torque requirements. Additionally, we have details on the precise tire and rim sizes for each engine type. You should be well aware of what you can and cannot purchase in this manner. Read on!
Why does tire size matter?
The sizes of motorcycle tires and automobile tires are often equivalent. The first three numerals indicate the millimeters of the tire’s width (mm). The aspect ratio, which is the height of the tire’s cross-section to its width, is represented by the next two numerals after the slash. The motorbike wheel’s diameter, measured in inches, is represented by the final two numerals following the dash.
Do tires need more than 38 psi?
Hello, Car Talk! Our 2015 Toyota Camry’s owner’s manual advises keeping the tires inflated to 35 psi on all four wheels. Every month when I check the pressure, I find that a few tires may have lost one to two psi. After several attempts, I eventually got exactly that one psi in there as I turn the compressor up. Sometimes while adding air, I’ll overshoot by a half or a full psi, which I then bleed off. Does that need to be done? What tire inflation range between over and under is considered acceptable? — Jay
Jay, you don’t have to do that. You can mess around and get near enough with tire inflation while still leading a full and happy life. Under-inflation of your tires poses the greater risk of the two methods to miss your target.
Underinflated tires run hotter because they have a wider rubber contact area on the road, which increases friction. The belts of the tire may also detach and disintegrate due to heat. The Tire Pressure Monitoring System (TPMS), which is a built-in gauge and a means of communication with the car’s computer, is now a standard feature in every car. Furthermore, a dashboard idiot light turns on whenever any tire pressure falls by around 10% below the acceptable level.
You should let the pressure drop to 31.5 psi before adding air if your Camry calls for 35 psi. On the higher end, your options are more varied. You can overinflate your tires by 10% or even more with little to no repercussions as long as you keep them below the maximum tire pressure indicated on the sidewall of the tire (which is different from the recommended pressure). For instance, if 35 psi is advised yet 44 psi is specified as the maximum safe pressure on your sidewall, you can put 38 or 40 psi in your tires without risk.
The maximum pressure is 44 psi. Although the ride will be tougher, there won’t be a blowout risk. You might even notice faster cornering and better fuel efficiency.
Therefore, the suggested tire pressure is the ideal balance between handling, comfort, fuel efficiency, and safety when it comes to filling your tires. But it’s perfectly acceptable to exceed the advised inflation by one or two psi. Additionally, going over is always preferable to going under.
Get the day’s top news, local, sports, business, entertainment, and opinion headlines from the Union-Tribune delivered to your inbox every morning throughout the workweek.
A 5 by 120 bolt pattern is what?
The bolt circle dimension (120), the notional circle determined by the studs’ centers, and the stud count (5) make up the 5×120 Bolt Pattern or Pitch Circle Diameter (PCD).
What is a wheel’s offset?
The distance between a wheel’s hub mounting surface and its center plane is known as the wheel offset. Positive offset indicates that the hub-mounting surface is situated nearer to the outside of the wheel. In contrast, a negative offset indicates that the object is moving inboard. If the mounting surface and the center plane of the wheel are parallel, then the offset is equal to zero. In other words, the lateral, or side to side, position of the wheel is determined by offset. The offset must be carefully chosen together with the new width as wheel widths vary to ensure that the wheel and tire have enough room inside the wheelwell to prevent friction or unwelcome contact with other parts.
Numerous wheel fitment problems can be resolved with the help of an understanding of wheel offset. Upsizing of wheels and tires frequently calls for different offsets. The handling of the car may suffer if the wheel offset is incorrect for the vehicle.
Don’t worry; Town Fair Tires’ comprehensive database enables our sales experts to recommend tires that are the ideal fit for your car.
40 PSI—is it too much?
For some vehicles with specs within this range, a pressure of 40 psi may be suitable. But for some other tires, this number can likewise be too high or too low.
For example, sports automobiles or passenger cars may be suitable with a pressure level of 40 psi. However, this is too low for heavy trucks and below the recommended pressure of 35 psi for small cars.
The recommended pressure range for tires on well-known sports cars and passenger vehicles is 32 to 40 psi. Depending on the type of vehicle, a specific index will be given. It should be noted that this level is suggested while the tire is cold, so after a lengthy trip, you must check it again to ensure proper adjustment.
There are many various car models available today, and each will utilize a different type of tire. Therefore, the manufacturer will decide in advance what pressure should be used in each of these tires.
It is your responsibility to maintain the best level for the car to run safely and smoothly. To find out whether or not this 40 psi pressure level is good for your car, you must first verify the tire specifications.