Depending on the year, model, and trim level of your Altima, the most popular tire sizes include 215/60R16 tires, 215/55R17 tires, 235/45R18 tires, and 235/40R19 tires.
In This Article...
Size, Simplified: 215-60-16
Your 2009 Nissan Altima’s original tire size is P215/60R16 94T. Below is a color-coded description of the tire size for the 2009 Nissan Altima.
The tire size was made to accommodate wheels or rims with a 16-inch diameter.
With a load index of 94, this tire can support a load that weighs no more than 1474 pounds (670 kg). A greater number indicates that the tire can support more weight. Lower values indicate the reverse.
This figure indicates that the aspect ratio of your tire is 60%. In other words, 60% of the width is represented by the sidewall height of your tire, measured from the rim’s edge to the tread. The sidewall height in this instance comes out to be 129 millimeters.
This letter indicates the design of your tire. About 99% of all tires sold today are made using the traditional manufacturing type, radial.
The highest speed that may be maintained for 10 minutes on this tire is 118 mph (190 km/h), according to its speed rating of T. A faster pace becomes risky.
What size tires can be put on a Nissan Altima?
Size of Tires The Nissan Altima provides three alternative tire sizes: the base P215/60HR16, the optional P215/55VR17, and the optional P235/40VR19. In addition, the tire measurements appear to be a mysterious puzzle that you must solve.
What is the Nissan Altima’s tire bolt pattern?
We’ve written in-depth articles about the Nissan Altima and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the ideal replacement tires or rims for your Nissan today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
Before 2001, the Nissan Altima’s bolt pattern was 4×4.5 inches (4×114.3mm), while starting in that year, it was 5×4.5 inches (5×114.3mm). They also have a center diameter of 2.6 inches (66.1 mm) and four or five M12 x 1.25 threaded lug nuts that require 83 lb-ft of torque to tighten.
That, however, hardly captures the entire picture. For each iteration, we’ve provided a more thorough description of the bolt pattern below. We also go through the individual lugs/bolts used, the center bore hub’s exact diameter, and the bolt torque requirements. Additionally, we have details on the precise tire and rim sizes for each engine type. You should be well aware of what you can and cannot purchase in this manner. Read on!
What tire pressure should a Nissan Altima have?
Are you concerned about your Nissan Altima’s tire pressure? Perhaps your low-pressure indicator lit up, but you are unsure of how much air your tires require. We looked into the matter, and the following is what we learned.
Tire pressure for your Nissan Altima should be 32 PSI. The majority of year models share the same number. Additionally, it is unaffected by the size of the tires.
You must understand how to check the levels now that you are aware of the recommended tire pressure. Continue reading to learn how to check the air in your tires, how often to check it, whether you can drive with low air pressure, and other topics.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
How many miles can a Nissan Altima from 2009 travel?
The majority of owners anticipate that their Altima will last for 250,000 miles based on their experience thus far. We may therefore assume that your Altima should endure at least ten years or 200,000 miles as a reasonable estimate.
The Nissan Altima from 2009 has how many lug nuts?
16 nuts, 4 locks, and 1 key are included in the Dorman – Autograde – Wheel Lug Nut & Lock Set: M12-1.25 Thread, Conical 60, Acorn, 32.46 mm L, Black Chrome (Part No.
What are some typical Nissan Altima 2009 issues?
The 2009 Nissan Altima has more issues than comparable midsize cars from the same year. The extra $1,000 is justified by the 2010 models’ lower issue rates.
The most frequent issue with the automobile at 90,000 miles is steering-related, including steering wheel lock failure. Nissan is running a service campaign to install an electronic steering column box and replace the electronic steering column lock. Depending on local labor rates, the replacement costs between $900 and $1,000.
Another typical issue at 80,000 miles is the transmission shuddering when accelerating. All of the Nissan lineup’s transmissions frequently fail. The only solution to the issue is to buy a new transmission, which will cost roughly $2,500.
According to owners, melting dashboards is another common issue that usually occurs around 55,000 kilometers. There are two ways to fix the issue. They include changing the dash entirely for more than $1,000 or adding a dash cover for approximately $100.
In comparison to other vehicles from the same year, there are just 4 recalls. Wheels, the back door, the suspension insulator, and the GPS system are among the items being recalled. The most serious suspension issues are those that can cause accidents.
How long does an Altima from 2009 last?
Response given by. Whether you drive a sedan or a coupe, the Nissan Altima is a fantastic car to own. You can anticipate your Nissan Altima to last 200,000 to 300,000 miles, or 13 to 20 years, thanks to Nissan’s commitment to quality and performance.
What is the Nissan Altima’s biggest issue?
The Altima’s continuously variable gearbox is where the majority of its issues lie (CVT). Owners complain about a shuddering or jerking sensation when accelerating as well as a delayed throttle response. even experienced transmission failure on some models.
Why does tire size matter?
The sizes of motorcycle tires and automobile tires are often equivalent. The first three numerals indicate the millimeters of the tire’s width (mm). The aspect ratio, which is the height of the tire’s cross-section to its width, is represented by the next two numerals after the slash. The motorbike wheel’s diameter, measured in inches, is represented by the final two numerals following the dash.
What is the Nissan Maxima’s bolt pattern for 2009?
We’ve produced in-depth articles about the Nissan Maxima and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the ideal replacement tires or rims for your Nissan today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
The Nissan Maxima has a center bore of 2.6 inches (66.1 mm), a bolt pattern of 5×4.5 (5×114.3 mm), and five lug nuts with a thread size of M12 x 1.25 that must be tightened with 80 lb-ft (108 Nm) of force.
What is a bolt pattern with a 114.3?
The stud count (five) and bolt circle measurement (114.3), the notional circle determined by the studs’ centers, make up the 5×114.3 Bolt Pattern or Pitch Circle Diameter (PCD).
What is a 5×114-3 fit?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
How are 114.3 and 115 different from one another?
There is a real difference between 114.3 and 115; rounding is not the only explanation. Since 1 inch is precisely 25.4 mm, 4.5 inches are precisely 114.3 mm.
Yes, they are quite close together. When I changed the rear axle bearings on my 1974 Cuda’s 4.5 inch or 114.3 mm bolt pattern, I did learn this. I was looking for anything to press against on the wheel end of the axle and thought, “Why not try these old rotors with a 115 mm bolt pattern off the back of my 2010 Charger?” It did a terrific job of pressing the bearings on, but after I hadn’t checked the specifications, I wondered if they were truly the same. However, if you put the rotor on the hub and pay great attention, you may observe that there is a small discrepancy. I wouldn’t switch out the wheels since, in my opinion, the acorn nuts wouldn’t fit snugly.
Since 4.5″ is 4.5″ after all, I did use Ford rims on our 1992 GC and the same ones on my 1995 Intrepid. The offset wasn’t precisely correct, but it worked and didn’t rub.
You might not get a response because this is an old thread, and you might be restarting an old thread. Consider starting a new thread, please.