How much do new tires for a Nissan Sentra cost?
In This Article...
What are the tire size, pressure, and wheel size for the Nissan Sentra?
The 2008 Nissan Sentra’s tires are 205/60 R15 in size, and its wheels are 17 inches in diameter. The tire pressure for this vehicle is 31 psi. It won’t be that difficult to reset the tpms on the automobile if you get new tires. Make sure the car is on level, flat ground first. Verify that the tire pressure is within the proper psi range for each tire. The psiAmount should be stamped on the tire’s side if you look there. You’ll want to get in the car after this is finished and switch on the power, but do not start the engine. A button with the label “tpms” or something similar is located to the right of the steering wheel. When it starts to blink, hit it and keep it down. Once it blinks, let the car sit for roughly 20 minutes so that it can readjust. You can switch off the car and then turn it back on when the light stops blinking to be sure the reset was successful.
The 2008 Nissan Sentra’s tire size is P205/60R15. The front and rear tires of the 2008 Nissan Sentra have a pressure of 33 and 32 psi, respectively. The 2008 Nissan Sentra comes with 15-inch wheels.
How big should my tires be for a Nissan Sentra?
Size of 2020 Nissan Sentra tires P205/60HR16 and P215/45WR18 are the tire sizes available for the 2020 Nissan Sentra. Wheel (rim) sizes for the 2020 Nissan Sentra are 16 x 6.5 and 18 x 7.5 inches.
What is the price of a Nissan Sentra tire?
Depending on the type and size of tire you buy, tire costs can vary significantly. 2021 Nissan Sentra tires typically cost $150 to $350 per tire, however high-performance tires can cost well over $500 per tire.
What size steering wheel comes with a Nissan Sentra?
Size of the 2019 Nissan Sentra steering wheel The steering wheel on the 2019 Nissan Sentra measures 14 1/2″ in diameter and 4 1/4 in circumference.
Is a spare tire available for the 2019 Nissan Sentra?
Your wheels and alignment may be subjected to additional stress if you drive on a flat or underinflated tire. Don’t make any other trips in your Sentra until you can get the flat tire repaired or replaced, even if it may occasionally be necessary to drive a short distance on a flat tire to get to a safe location.
Quick remedies have their pros and cons. Don’t expect on them to keep you on the road for very long, even though they all assist you in getting your Nissan Sentra to Firestone Complete Auto Care. A Bridgestone or Firestone tire warranty may potentially be nullified by using a temporary sealant.
Don’t depend too much on your spare tire. A small spare tire might be included with your 2019 Nissan Sentra. A spare tire is distinct from a regular tire and is only intended to be driven a specific distance at lower speeds.
A 2008 Nissan Sentra has what kind of bolt pattern?
The bolt pattern of the 2008 Nissan Sentra 2.0 SL is 4-114.3 mm. This indicates that there are 4 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
You should measure from the center of one lug to the center of the lug across from it in order to obtain an accurate measurement of your four lug bolt pattern without the use of a bolt pattern tool.
What is the Nissan Sentra’s bolt pattern for 2009?
What is the Nissan Sentra’s bolt pattern? Although older generations of the Nissan Sentra had a 4×114 bolt pattern, the most recent vehicles have a 5×114.
What is the Nissan Sentra’s bolt pattern for 2006?
What is the Nissan Sentra’s bolt pattern? Although older generations of the Nissan Sentra had a 4×114. 3 bolt pattern, the most recent vehicles had a 5×114. 3 bolt pattern.
What size lug nuts come on a Nissan?
The lug nuts on the 2017 Nissan Altima are M12 X 1. 25 with a 21mm hex. This indicates that the thread is 1.25 inches long with an M12 pitch, so you will need a 21mm socket to remove the lug nuts.
What is a bolt pattern for a Nissan Altima?
We’ve written in-depth articles about the Nissan Altima and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the ideal replacement tires or rims for your Nissan today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
Before 2001, the Nissan Altima’s bolt pattern was 4×4.5 inches (4×114.3mm), while starting in that year, it was 5×4.5 inches (5×114.3mm). They also have a center diameter of 2.6 inches (66.1 mm) and four or five M12 x 1.25 threaded lug nuts that require 83 lb-ft of torque to tighten.
That, however, hardly captures the entire picture. For each iteration, we’ve provided a more thorough description of the bolt pattern below. We also go through the individual lugs/bolts used, the center bore hub’s exact diameter, and the bolt torque requirements. Additionally, we have details on the precise tire and rim sizes for each engine type. You should be well aware of what you can and cannot purchase in this manner. Read on!
Which rims can be swapped out?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.