Oversized tires on a Nissan Frontier are a surefire head-turner. They need to have come with with bigger tires because the aesthetics are so good. Going with wider tires actually suits the Frontier better because it is quite a square-shaped, brutish Ute/pickup. Taller wheels help enhance break-over angles when driving off-road and provide greater obstacle clearance thanks to increased ground clearance.
What size tire can you comfortably place on a factory Nissan Frontier without making any other modifications? With a factory suspension, a Nissan Frontier can accommodate tires up to 265/75/16 in size. This tire size does not require trimming of the fender liners or create any rubbing.
Even with that 2.5″ spacer, the largest size you can fit is the previously mentioned 265/75/16. Additionally, without any additional modifications, it is the biggest tire that can be mounted on the factory wheels. That size is exactly 31.6 inches in length, falling just short of 32″. You run the risk of the wheels scratching and striking the fenders at full lock and full compression if you install an aftermarket rim with a higher negative offset.
Before adding larger tires to a stock truck or ute, the following five considerations must be made:
- Clearance for fender liners
- Backspacing
- Rim offset
- Spare-wheel room
- Articulation (Flex) (Flex)
You can get away with a 265/75/16 or a 265/70/17 when mounting a larger tire to the standard Nissan Frontier rims. Yes, it is a thinner tire than, example, a 285 width, but the 65 and 70 profile, which is taller but the same width as the original tire, offers more ground clearance.
Let’s examine the requirements in more detail as well as the consequences of a larger tire upgrade.
In This Article...
Give me the scoop!
The first set of numerals in a metric tire size, such as the “265” in 265/75r16, is referred to as the tire width. The tire width is measured in millimeters using metric units. The second set of digits describes the height of the tires. The “75” in the example above indicates that the tire height is a value that is 75% of the tire width, which is how tire height is expressed as a percentage of tire width. The final series indicates the wheel diameter that the tire is designed to suit, such as a 16 “size of the wheel.
Depending on the trim level of the truck, 2nd generation Frontiers often have either a 16″ or an 18″ diameter wheel out of the factory. The factory width for 16″ and 18″ wheels is 7″ and 7.5″, respectively. The bolt configuration is 6×4.5 “, which is also written as 6×114.3mm. A Frontier from the second generation has a 66.1mm bore. 16″ and 18” OEM wheels with a +30mm offset.
Oh my goodness, that’s a lot of details! But no worries; for the time being, we merely want to concentrate on tire width and offset. Tire width has been determined, but offset has not. Offset is the separation between the hub mounting surface and the centerline of the wheel. Practically speaking, the offset value, which is expressed in millimeters, affects how much “poke”—or how far the wheel is positioned inward or outward of the wheel well—you have. The wheel is placed farther outside the wheel well the lower the offset value. The typical offset values are between +30mm and -15mm.
What’s the problem then? Well, lads and gals, a wide tire and a low/aggressive offset are the ingredients for rub. for instance, a -12mm offset and a 285mm tire width. The underlying idea is that the wheel has a greater arc of swing as you push it out of the wheel well. A disgruntled driver and inner fender result from the reduction in clearance required to complete turns at full lock caused by that combination with a bigger tire.
How many sizes can I increase my tires?
When making tight turns or when the suspension bottoms out, the tires may rub against the fender well if the new wheels and tires are larger than the stock ones. Speedometer readings can be erroneous because they measure speed by measuring the distance covered with each wheel rotation. Both the factory diameter and breadth of the wheels and tires must be preserved in order to keep the suspension and speedometer operating properly.
On the original rim, it is generally safe to install a tire that is up to 20 millimeters wider than stock. Depending on the rim’s width, the tire’s actual width will change: For every half inch (12.5 millimeters) increase in rim width, the tire will enlarge by 5 millimeters.
Because tire sizes are a combination of metric and percentage measurements while wheel sizes are in Imperial measurements, switching to a different rim becomes a little more challenging.
For instance, the car’s current tires are 225/45R15. This is what it indicates:
- Tire width in millimeters is 225.
- Sidewall height expressed as a percentage of tire width is 45.
- Rim diameter in inches, 15.
Multiply the wheel size by 25.4 to get the millimeter equivalent:
1.5 times 25.4 equals 381 millimeters.
Next, multiply the tire width by the height percentage to determine the sidewall height:
101.25 millimeters is equal to 225 millimeters times 0.45.
To determine the combined height of the wheel and tire, add the two figures together:
482.25 millimeters (381-201 = 381.25)
The new tire and wheel should be within 3% of the height of the original combination in order to maintain speedometer accuracy. A tire with a height of 75.85 millimeters, or 34 percent of the 220 millimeter width, or 220/34R16, would be needed to move to a 16 inch (406.4 millimeter) rim. The closest size produced, 220/30R16, is well within the size tolerance of 3%.
Will Nissan Frontier fit 275 65r18 tires?
I have a 2018 Nissan Frontier 4WD with ReadyLIFT Suspension Lift 2.5; would 18×8.5 +18 wheels fit? “?
They do, indeed! 275/65 All Terrain TA KO2 tires are mounted on Moto Metal MO993 18×8.5 wheels on this 2018 Nissan Frontier, which also features a 2.5-inch ReadyLIFT Suspension Lift “There is no rubbing or scouring, no trimming required. The pictures show that this wheel and tire combination is possible. ** The 2018 Nissan Frontier adopts a Slightly Aggressive posture. Also keep in mind that spacers affect fitment; this vehicle is equipped with None up front and None out back.
As this information is purely reliant on the owner of this vehicle, we always advise locating a few autos that have attained this fitting. The number of variables makes it impossible for us to confirm that every fitment is possible or accurate, even if we evaluate every gallery page. But it MUST fit if all the other children are doing it!
The owners of the automobiles, or agents of the owners of the vehicles, have added all gallery pages and information. The information posted on this website is not under the control of or endorsed by Custom Offsets LLC. Use at your own risk and always check various sources before making a purchase of wheels, tires, or a suspension system.
Is it possible to get new tires in a different size?
Your tires’ size can be altered without actually affecting their diameter. For instance, if you desire larger rims, you can choose tires that reduce the “height” of the outer tire to make up for the larger rims.
What rim size is necessary for a 285 tire?
In order to upgrade to a real 33 “Many have questioned whether a factory 16x8J rim will be able to fit the bigger tire, which comes in the shape of a 285/75/16. Is the 8J rim broad enough to accommodate a 285mm tire comfortably? Is the UCA clearance sufficient?
285/75/16 or 33 “16×8 wheels can accommodate tires. Even though the contact area won’t be completely flat at usable street pressure, they fit exactly properly. A 16×8 rim, in the opinion of many “wheelers,” is the ideal wheel size for 285/75-16 tires.
For that width tire, I personally favor 16 x 9 wheels, especially for use on roads and surface contact when completely inflated. Many enthusiasts choose the fat bubble style look, which gives the wheel an impression of being somewhat broader and more aggressive.
A 265 75 r16 tire is what size?
The section width of a 265/75R16 tire, which measures the width of the tire from its inner to its outer sidewall, is 10.4 inches. The largest wheel that can fit the tire has a rim diameter of 16 inches. The distance between the tire tread and the top of the sidewall is 7.8 inches (199 mm). The tire’s outside diameter is represented by the overall diameter of 31.7 inches (804 mm), which also denotes the height of the tire. The tire’s outer perimeter measures 99.5 inches (2524.6 mm) in circumference. The number of tire rotations represents how many times a tire turns when traveling a given distance in miles or kilometers. A 265/75R16 tire rotates at 637 miles per hour (396 revolutions per kilometer).
Does it harm your truck to have larger tires?
In order to ensure proper stability and performance, it is best to adhere to the tire selection and sizing recommendations provided by your vehicle’s manufacturer. Make sure that the new tires meet or exceed the load-carrying capacity of your vehicle at the recommended inflation pressure if you decide to alter your tires from their original size. You should also take into account if the taller tires will affect any Advanced Driver Assistance Systems.
Additionally, make sure the larger tires you desire are suitable with the size of your wheels and rims and won’t scuff up the calipers or the sidewalls of the wheel well before purchasing them.
Your automobile’s balance and speed may suffer if you mount larger tires on your car, SUV, crossover, or light truck because doing so raises the vehicle’s clearance and increases body roll and load transfer.
Will my truck be taller with larger tires?
The height of your car will grow, which is the most noticeable effect of wider tires. You can improve ground clearance—the distance between the road surface and the bottom of the vehicle—by raising it a few inches off the ground. For SUVs that come equipped with small tires, upgrading can be advantageous, especially if you plan to drive off-road. You won’t get stuck in ramps, potholes, mud, or snow because of it. Reduced chance of damage to your car’s undercarriage is another benefit of higher road clearance.
How much tire size am I able to acquire without a lift?
The owner’s manual for your truck contains information on the largest tires that will fit on it. The tire sizes (both larger and smaller) that the vehicle’s manufacturer recommends are listed there. The type of your truck and the size of the rims are the two main criteria affecting your final decision. If your truck isn’t elevated, you can often accommodate tires up to 33 inches “. You can locate a reliable set of 37” wheels in case the vehicle is hoisted “bigger tires, if necessary.