Your 2018 Nissan Altima’s original tire size is P215/60R16 94T. Below is a color-coded description of the tire size for the 2018 Nissan Altima.
The tire size was made to accommodate wheels or rims with a 16-inch diameter.
With a load index of 94, this tire can support a load that weighs no more than 1474 pounds (670 kg). A greater number indicates that the tire can support more weight. Lower values indicate the reverse.
This figure indicates that the aspect ratio of your tire is 60%. In other words, 60% of the width is represented by the sidewall height of your tire, measured from the rim’s edge to the tread. The sidewall height in this instance comes out to be 129 millimeters.
This letter indicates the design of your tire. About 99% of all tires sold today are made using the traditional manufacturing type, radial.
The highest speed that may be maintained for 10 minutes on this tire is 118 mph (190 km/h), according to its speed rating of T. A faster pace becomes risky.
In This Article...
235/45R18
If the vehicle model is offered in one or more sizes, verification of the rim size must be done.
O.E. rim width alternatives or if the car already has rims that aren’t original equipment.
Original equipment dimensions are based on the most up-to-date information. The original equipment size of your car may fluctuate due to choices or manufacturer modifications. Please make sure the indicated size corresponds to the tire size specified on your car (often found in the door jamb) or in the owner’s manual. Performance and handling may be affected if tires that have a lower speed rating than the original equipment tires are replaced.
NOTE: We take great care to offer the following search results in an accurate and current manner. Incorrect data may be the consequence of certain factors, such as vehicle changes, “Plus Size” fitments, or search menu selection problems.
NOTE: Driving in the winter poses unique mobility issues. Winter tire use, which increases traction performance in snow and ice, necessitates extra caution when accelerating, braking, turning, and speed. Driving carefully is essential on all types of roads, including dry and rainy ones, as well as on snowy and icy ones.
The rear tires are especially important for vehicle control and safe operation during braking and turning in winter driving conditions. Winter tires are therefore best used on all wheel locations.
Winter tire usage and fitting instructions may vary from vehicle to vehicle, so always refer to the owner’s manual or tire placard before making any decisions.
- All wheel positions benefit most from the use of winter tires.
- Any vehicle that has winter tires on the front axle must also have those on the back. All passenger cars, SUVs, and light trucks, including front-wheel drive, 4X4 and all-wheel drive vehicles, should have winter tires on both axles.
- It is advised (but not essential) that winter tires be mounted on the front axle of any vehicle if winter tires are used on the rear axle.
- The speed rating of each set of winter tires should be uniform. For use in winter circumstances, it is generally allowed to utilize winter tires that have a lower speed rating than the original equipment/all-season tires; however, speed should be lowered correspondingly. Vehicles should never go faster than the lowest speed-rated tire on the vehicle’s “maximum speed.” Failure of the tires could happen otherwise.
- Winter tires that are used in summertime conditions may quickly wear out.
- Where permitted by law, studded tires adhere to the same guidelines as above.
What tire size does a 2018 Nissan Altima come with?
Depending on your Altima’s year, model, and trim level, the most popular tire sizes are 215/60R16 tires, 215/55R17 tires, 235/45R18 tires, and 235/40R19 tires.
What size tires can be put on a Nissan Altima?
Size of Tires The Nissan Altima provides three alternative tire sizes: the base P215/60HR16, the optional P215/55VR17, and the optional P235/40VR19. In addition, the tire measurements appear to be a mysterious puzzle that you must solve.
The 2019 Nissan Altima will fit what size wheels?
Depending on the model year and trim level of your Nissan Altima, a choice of rim diameters, including 16″, 17″, 18″, and 19″, are commonly available.
What size wheels fit the Nissan Altima?
The tire sizes for the 2020 Nissan Altima are P235/40VR19, P215/60HR16, and P215/55VR17. The wheel (rim) sizes for the 2020 Nissan Altima are 19 X 8, 16 X 7, and 17 X 7.5.
What tire pressure should a Nissan Altima have?
Are you concerned about your Nissan Altima’s tire pressure? Perhaps your low-pressure indicator lit up, but you are unsure of how much air your tires require. We looked into the matter, and the following is what we learned.
Tire pressure for your Nissan Altima should be 32 PSI. The majority of year models share the same number. Additionally, it is unaffected by the size of the tires.
You must understand how to check the levels now that you are aware of the recommended tire pressure. Continue reading to learn how to check the air in your tires, how often to check it, whether you can drive with low air pressure, and other topics.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
What size steering wheel does a Nissan Altima have?
You’re considering purchasing a new vehicle, which is one of the most likely reasons you’d want to know the size of your steering wheel.
Due to the wear and tear on the steering wheel, a steering wheel cover will help you maintain your car’s market value.
What is the Nissan Altima’s bolt pattern for 2018?
How big is the Nissan Altima’s bolt pattern? All Nissan Altimas have had a 5×114. 3 bolt pattern, commonly referred to as a 5×4. 5 bolt pattern, since 2002.
What is a bolt pattern for a Nissan Altima?
We’ve written in-depth articles about the Nissan Altima and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the ideal replacement tires or rims for your Nissan today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
Before 2001, the Nissan Altima’s bolt pattern was 4×4.5 inches (4×114.3mm), while starting in that year, it was 5×4.5 inches (5×114.3mm). They also have a center diameter of 2.6 inches (66.1 mm) and four or five M12 x 1.25 threaded lug nuts that require 83 lb-ft of torque to tighten.
That, however, hardly captures the entire picture. For each iteration, we’ve provided a more thorough description of the bolt pattern below. We also go through the individual lugs/bolts used, the center bore hub’s exact diameter, and the bolt torque requirements. Additionally, we have details on the precise tire and rim sizes for each engine type. You should be well aware of what you can and cannot purchase in this manner. Read on!
Why does tire size matter?
The sizes of motorcycle tires and automobile tires are often equivalent. The first three numerals indicate the millimeters of the tire’s width (mm). The aspect ratio, which is the height of the tire’s cross-section to its width, is represented by the next two numerals after the slash. The motorbike wheel’s diameter, measured in inches, is represented by the final two numerals following the dash.
What is a wheel’s offset?
The distance between a wheel’s hub mounting surface and its center plane is known as the wheel offset. Positive offset indicates that the hub-mounting surface is situated nearer to the outside of the wheel. In contrast, a negative offset indicates that the object is moving inboard. If the mounting surface and the center plane of the wheel are parallel, then the offset is equal to zero. In other words, the lateral, or side to side, position of the wheel is determined by offset. The offset must be carefully chosen together with the new width as wheel widths vary to ensure that the wheel and tire have enough room inside the wheelwell to prevent friction or unwelcome contact with other parts.
Numerous wheel fitment problems can be resolved with the help of an understanding of wheel offset. Upsizing of wheels and tires frequently calls for different offsets. The handling of the car may suffer if the wheel offset is incorrect for the vehicle.
Don’t worry; Town Fair Tires’ comprehensive database enables our sales experts to recommend tires that are the ideal fit for your car.
What is a 5×114-3 fit?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.