Tire size for the 2011 Nissan Maxima SV is P245/45R18.
In This Article...
What are the tire size, pressure, and wheel size for a Nissan Maxima?
While the tire size is p245/45r18 and the wheel size is 18 inches, the recommended tire pressure for the 2011 Nissan Maxima is 33 psi. It won’t be that difficult to reset the tpms on the automobile if you get new tires. Make sure the car is on level, flat ground first. Verify that the tire pressure is within the proper psi range for each tire. The psiAmount should be stamped on the tire’s side if you look there. You’ll want to get in the car after this is finished and switch on the power, but do not start the engine. A button with the label “tpms” or something similar is located to the right of the steering wheel. When it starts to blink, hit it and keep it down. Once it blinks, let the car sit for roughly 20 minutes so that it can readjust. You can switch off the car and then turn it back on when the light stops blinking to be sure the reset was successful.
The 2011 Nissan Maxima has 18-inch wheels, P245/45R18 tires, and a 33 psi recommended tire pressure. Depending on the model, the 2011 Nissan Maxima’s standard wheel size will change. The base model 2011 Nissan Maxima comes equipped with 18-inch silver aluminum wheels.
How big are the wheels on a Nissan Maxima?
The P245/40WR19 and P245/45VR18 tire widths are available for the 2020 Nissan Maxima. Wheel (rim) sizes for the 2020 Nissan Maxima are 19 x 8.5 and 18 x 8.5 inches.
What is the Nissan Maxima’s lug pattern for 2011?
The bolt pattern on the 2011 Nissan Maxima 3.5 SV is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
You should measure from the center of one lug to the outer edge of the lug farthest from it in order to obtain an accurate measurement of your five lug bolt pattern without the use of a bolt pattern tool.
Nissan Maxima bolt pattern: what is it?
We’ve produced in-depth articles about the Nissan Maxima and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the ideal replacement tires or rims for your Nissan today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
The Nissan Maxima has a center bore of 2.6 inches (66.1 mm), a bolt pattern of 5×4.5 (5×114.3 mm), and five lug nuts with a thread size of M12 x 1.25 that must be tightened with 80 lb-ft (108 Nm) of force.
That, however, hardly captures the entire picture. For each iteration, we’ve provided a more thorough description of the bolt pattern below. We also go through the individual lugs/bolts used, the center bore hub’s exact diameter, and the bolt torque requirements. Additionally, we have details on the precise tire and rim sizes for each engine type. You should be well aware of what you can and cannot purchase in this manner. Read on!
A 5 by 120 bolt pattern is what?
The bolt circle dimension (120), the notional circle determined by the studs’ centers, and the stud count (5) make up the 5×120 Bolt Pattern or Pitch Circle Diameter (PCD).