For my mother’s automobile, I need to get some new wheels, but I’m not sure how size they should be. The 2019 Nissan Altima she is driving. What wheel size does a 2019 Nissan Altima have?
In less than two minutes, find out if your auto insurance is being overcharged.
It might be challenging to order wheels for a car, so you must all be completely aware of your situation.
There are six 2019 Nissan Altima versions with different wheel sizes. There is some overlap in the sizes, but you must know the model to be certain of the wheel size. The six models and required wheel sizes are listed below:
- 215/60R16 for the 2019 Nissan Altima S
- 215/55R17 for the 2019 Nissan Altima SL
- 235/40R19 for the 2019 Nissan Altima SR
- 215/55R17 for the 2019 Nissan Altima SV
- 235/40R19 for the 2019 Nissan Altima Platinum
- 235/40R19 for the 2019 Nissan Altima VC-Turbo
Jerry may check at your auto insurance and uncover new discounts as you get new wheels. Jerry is an automobile insurance application that facilitates automobile insurance cost savings. Simply download the app, respond to a few questions, and Jerry will find you reliable sources of reasonable rates. Jerry helps drivers save $887 annually on average.
In This Article...
Size of Nissan Altima wheels
When you want to improve your Nissan Altima with an aftermarket option or replace the factory wheels, you can use the wheel size chart as a fitment guide. It assists in determining the potential stock and custom offset range, wheel width specifications, and the crucial Nissan Altima bolt pattern for proper installation.
We have divided the Nissan Altima wheels specifications by generation for your convenience. To discover the required year of production and to view the wheel size, scroll down the page.
What size wheels come on Nissan Altimas?
Depending on the model year and trim level of your Nissan Altima, a choice of rim diameters, including 16″, 17″, 18″, and 19″, are commonly available.
Can Subaru wheels be used on a Nissan Altima?
The wheel will be further out the higher the offset, which is the opposite for a lower offset. The XV uses the same bolt pattern and offset as the Forester, which has been in use for more than 16 years, expanding your selection of wheels. A lot of owners replace the OEM wheels, so don’t rule out alloys for winter wheels. Another option for searching is Craigslist.
Additionally, I might advise changing your profile to add a more precise location in Canada, which will assist with future and current regional suggestions.
On what size of a Nissan Altima can you place tires?
The majority of contemporary Nissan Altimas have tires with a diameter of 16 to 19 inches. Depending on your Altima’s year, model, and trim level, the most popular tire sizes are 215/60R16 tires, 215/55R17 tires, 235/45R18 tires, and 235/40R19 tires.
How do I determine which wheels will suit my car?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. That should indicate the typical rim size.
What size wheels can I fit?
When making tight turns or when the suspension bottoms out, the tires may rub against the fender well if the new wheels and tires are larger than the stock ones. Speedometer readings can be erroneous because they measure speed by measuring the distance covered with each wheel rotation. Both the factory diameter and breadth of the wheels and tires must be preserved in order to keep the suspension and speedometer operating properly.
On the original rim, it is generally safe to install a tire that is up to 20 millimeters wider than stock. Depending on the rim’s width, the tire’s actual width will change: For every half inch (12.5 millimeters) increase in rim width, the tire will enlarge by 5 millimeters.
Because tire sizes are a combination of metric and percentage measurements while wheel sizes are in Imperial measurements, switching to a different rim becomes a little more challenging.
For instance, the car’s current tires are 225/45R15. This is what it indicates:
- Tire width in millimeters is 225.
- Sidewall height expressed as a percentage of tire width is 45.
- Rim diameter in inches, 15.
Multiply the wheel size by 25.4 to get the millimeter equivalent:
1.5 times 25.4 equals 381 millimeters.
Next, multiply the tire width by the height percentage to determine the sidewall height:
101.25 millimeters is equal to 225 millimeters times 0.45.
To determine the combined height of the wheel and tire, add the two figures together:
482.25 millimeters (381-201 = 381.25)
The new tire and wheel should be within 3% of the height of the original combination in order to maintain speedometer accuracy. A tire with a height of 75.85 millimeters, or 34 percent of the 220 millimeter width, or 220/34R16, would be needed to move to a 16 inch (406.4 millimeter) rim. The closest size produced, 220/30R16, is well within the size tolerance of 3%.
What is the 2008 Nissan Altima’s bolt pattern?
The bolt pattern of a 2008 Nissan Altima Coupe 2.5 S is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
You should measure from the center of one lug to the outer edge of the lug farthest from it in order to obtain an accurate measurement of your five lug bolt pattern without the use of a bolt pattern tool.
What is the Nissan Altima’s bolt pattern for 2015?
The bolt pattern on the 2015 Nissan Altima Sedan 2.5 S is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
What is the Nissan Altima’s bolt pattern?
We’ve written in-depth articles about the Nissan Altima and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the ideal replacement tires or rims for your Nissan today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
Before 2001, the Nissan Altima’s bolt pattern was 4×4.5 inches (4×114.3mm), while starting in that year, it was 5×4.5 inches (5×114.3mm). They also have a center diameter of 2.6 inches (66.1 mm) and four or five M12 x 1.25 threaded lug nuts that require 83 lb-ft of torque to tighten.
That, however, hardly captures the entire picture. For each iteration, we’ve provided a more thorough description of the bolt pattern below. We also go through the individual lugs/bolts used, the center bore hub’s exact diameter, and the bolt torque requirements. Additionally, we have details on the precise tire and rim sizes for each engine type. You should be well aware of what you can and cannot purchase in this manner. Read on!
Can I change the size of the wheels on my car?
Simply simply, the bigger the tire, the better the traction your car has. A tire’s width affects how much surface area it covers on the road. According to iSee Cars, your vehicle has more to grab onto due to the increased touch with the pavement, which improves handling and maneuverability.
Does tire size thus actually matter? Yes, to answer briefly. But is wheel size important? It varies.
Tires and wheels are two different concepts. The wheel arrangement includes tires. For instance, even though the rims on your car are a specific size, you can buy alternative tire sizes to fit them as long as the middle of the tire is the right size. Having said that, a car with larger rims will frequently be able to accommodate bigger tires than other cars.
Which rims can be swapped out?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.
What automobiles include a 5×114-3 bolt pattern?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
What automobiles have a 5×115 bolt pattern?
Many fantastic cars, including Buicks, Cadillacs, Chevrolets, GMs, Chryslers, Dodges, Pontiacs, and more, come with wheels with a 5×115 bolt pattern. 5×115 wheels may enhance the appearance of any vehicle, whether you’re driving a polished ride that exudes high-end elegance or a traditional American muscle car.
A 5×114-3 bolt pattern is what?
The stud count (five) and bolt circle measurement (114.3), the notional circle determined by the studs’ centers, make up the 5×114.3 Bolt Pattern or Pitch Circle Diameter (PCD).
Are 114.3 and 115 equivalent?
There is a real difference between 114.3 and 115; rounding is not the only explanation. Since 1 inch is precisely 25.4 mm, 4.5 inches are precisely 114.3 mm.
Yes, they are quite close together. When I changed the rear axle bearings on my 1974 Cuda’s 4.5 inch or 114.3 mm bolt pattern, I did learn this. I was looking for anything to press against on the wheel end of the axle and thought, “Why not try these old rotors with a 115 mm bolt pattern off the back of my 2010 Charger?” It did a terrific job of pressing the bearings on, but after I hadn’t checked the specifications, I wondered if they were truly the same. However, if you put the rotor on the hub and pay great attention, you may observe that there is a small discrepancy. I wouldn’t switch out the wheels since, in my opinion, the acorn nuts wouldn’t fit snugly.
Since 4.5″ is 4.5″ after all, I did use Ford rims on our 1992 GC and the same ones on my 1995 Intrepid. The offset wasn’t precisely correct, but it worked and didn’t rub.
You might not get a response because this is an old thread, and you might be restarting an old thread. Consider starting a new thread, please.