Nowadays, a remote keyless entry device is standard on all new Nissan vehicles. With this method, you can start your car’s engine and unlock your door without really using a key. It’s convenient to have a Smart Key as Nissan does, but what happens if the battery dies? It can be difficult to choose the micro-battery size to buy for your Nissan intelligent key because there are so many different sizes available. Fortunately, we’ve looked into batteries and the replacement procedure to give you an answer here.
The CR2032 3-Volt battery is the same size for all Nissan Smart Keys. Use these instructions to replace the battery in your key fob:
- Press the tiny button on the rear of the fob to remove the valet key.
- Gently pry open the fob with a screwdriver or card until it clicks and separates into two halves.
- Replace the battery after removing the old one.
- Replace the valet key and put the key fob back together.
Here is a summary of Nissan Smart Key battery sizes and how to change them. However, there is more to understand about this procedure. We will go into more depth on how to change the battery in the following sections of this essay. We’ll also go over programming the Nissan key fob, how long the batteries should last, and whether or not they’re covered by a warranty.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
In This Article...
Energizer CR2032 Nissan Key Fob Battery Replacement Kit for 2009 to 2017 Models
For many Nissan vehicles, this Nissan Key Fob Battery Replacement is the OEM alternative. For vehicle fitment, please refer to the list below. Replace the original battery from your key fob, keyless entry remote, or remote key with this Energizer CR2032 3v Lithium Battery. The highest quality components are used to create Energizer key fob battery replacements, giving you a battery that lasts forever. Make sure the old battery in your car’s remote key or key fob has a 2032 number. The battery number for your key fob, keyless entry remote, or remote key can typically be found on the back cover if it is not in your remote. The reason why Energizer key fob replacement batteries are superior to original equipment batteries is because manufacturers frequently employ lower-quality products or batteries to cut costs and entice you back into the service department where they can profit more from you, the customer.
All Energizer batteries have a long lifespan and are constructed using the best components available. The dependable power you have come to expect from major international brands like Energizer is provided by these specific application batteries. Since Energizer is the most popular battery among automotive car audio specialists, you can be confident that it is a battery you can rely on.
- 10 years of storage guarantee.
- superior lithium
- three levels of corrosion defense
- IEC: D2032
- 3.0 Volt
- Size: 2 x 20 x 20 (mm).
- 220 mAh
In a Nissan key fob, what kind of battery is used?
Although replacing the key fob battery on your Nissan model is a simple procedure, it does require handling delicate and sensitive electronics. Make sure to use gloves to prevent harm to the key fob (latex or non-latex substitute). The CR2032 3V battery is used in the Nissan key fob. Typically, a multipack of them costs less than $5 USD. A tiny flathead screwdriver is also required.
- Nissan key fob flipped over to the rear
- Slide the little lever to release the emergency key.
- Delete the emergency key
- Find the open slot between the front and rear portions of the key fob on its top.
What size battery does a key fob for a 2013 Nissan Altima require?
Compatible replacement batteries for Nissan Altima key fob remotes (2007-2021 Nissan Altima Key Fob Battery CR2032)
What size battery goes inside a key fob?
The fact that button cell batteries have an identifying number printed directly on the top is one practical feature. This number, which is often three to four digits long, will let you know what kind of battery you need. The CR2032 button cell is the one that’s most frequently found in key fobs. The following button cells are also frequently used: CR2450, CR2025, CR1616, and CR2016.
The type of battery that your fob requires may typically be found in your vehicle owner’s manual if, for any reason, you are unable to locate the number on your old battery. Alternately, you can visit your nearby Batteries Plus, where one of our specialists will assist you in identifying the best battery for your requirements.
What type of battery does a key fob for a 2015 Nissan Altima require?
The replacement battery itself is the only component you’ll need to have your key fob working properly once more:
Coin cell battery, 3 volts, part number CR2032
It may already be familiar to you as the tiny cell used to swap out a watch battery. You can easily find them at any hardware store in Reading, and they come from a variety of producers, including Panasonic, Sony, Energizer, Maxell, and Duracell.
To learn which battery is the original equipment used by the manufacturer, we advise consulting your user manual. Your 2014 Nissan Altima’s OEM battery, for instance, might be a Panasonic CR2032 3V coin cell. Bring your key fob to Rolls Auto Sales in Philadelphia if that information isn’t in your manual or if you have any issues; we’ll be pleased to assist you.
What kind of battery should I use in my key fob?
The computer keeps track of the output voltage of the fob’s battery while the key is in use. The warning light on the dash will turn on to alert you that it’s time to change the batteries whenever the voltage reaches a specific level.
You may not need to go somewhere because the most fob can be pryed open to reach the battery. The best battery to use and instructions for replacing it may be found in your owner’s handbook. The information is also available online. Use the appropriate battery type, please. Even if the fob is still functional, a different battery will have a different voltage and the system may not register properly.
It’s a good idea to change the batteries in all of your key fobs at once if you have more than one because they all usually run out at the same time. Remember that some vehicles might need to be reset before the low battery key fob indicator goes out.
Why does the battery in my Nissan key fob keep dying?
When our technology malfunctions, it is annoying. Frequently, it is as a result of a dead battery. There are a few typical causes of battery death. For instance, incorrect use or storage might cause a battery to deplete. It might also have simply reached the end of its life! Each battery is unique. Although your key FOB might be dead for this reason, it might also be dead for another cause, in which case you might need to get creative.
How long does the battery in a car key fob last?
Keyless entry is a fantastic feature, but you can only benefit from it if you keep the technology up to date.
The little things in life can often mean the most, such as not having to search through your purse for your keys or using your key fob to raise and unlock the back doors so you can load groceries.
But what occurs if the fob breaks down? The key fobs for your car require maintenance just like the vehicle itself does.
When anything breaks down, Gary Freeman, owner of C & G Auto in Myrtle Beach, advised against replacing it right away.
“A replacement fob can be pricey; they can cost several hundred dollars, and once you have a replacement fob, they need to be programmed,” said Freeman.
He advises checking the battery as your first action. If you have to press the lock or unlock button on the remote numerous times before it locks or unlocks, it could be a sign that the battery is starting to lose power, according to Freeman.
According to his calculations, the keyless entry remote can be safely stored or hung up anywhere beyond the six to ten feet from which the automobile computer system can read the fob.
According to Freeman, the battery life for the majority of automotive key fobs is three to four years with regular use. Additionally, he claims that the battery life of your fob may be impacted by where you keep it. Freeman advises against hanging the fob near the car or leaving it in the car overnight.
“It (the key fob) does send a signal continuously, so it drains the battery in the key fob and its causing an excessive drainage on the battery of the automobile,” noted Freeman. “A computer is identifying that signal saying I’m ready to start.”
According to Freeman, if the key fob malfunctions, the automobile frequently won’t start because the computer system won’t acknowledge that the key fob is present in the vehicle.
“In most situations, the owners’ manual will clear that up for you, or practically any auto repair facility can replace that battery,” Freeman continued.
How can you use a dead key fob to start a Nissan?
This is how: Depress the little release button after turning the Nissan key fob around. From the key fob’s base, remove the concealed emergency key. To enter your Nissan, put the emergency key in the driver’s side door and open it.
Are all key fob batteries the same?
What type of battery is needed for the key fob? Key fobs are powered by 3V button cells, typically the CR2032. Other frequently used button cell batteries are the CR2016, CR1616, CR2025, and CR2450. These batteries are sold by well-known companies including Duracell, Energizer, and Panasonic.
What should I do if the battery in my Nissan key is low?
You can resume using the key fob to start and enter your car once the battery in your Nissan smart key is replaced. The steps to follow to change the battery in your key fob are as follows:
- When the battery died, you could still enter your Nissan by using the concealed key.
- Remove the old battery and the key casing.
- Place the negative side of the CR2025 battery upward before replacing it.
- Reassemble the key fob and give it a try!
How long should the battery on a key fob last?
How Long Are Key Fobs Good For? The battery in your car’s fob or remote will eventually need to be replaced, just like any other battery. A car fob battery should typically last three to four years.
Why won’t my key fob function now that I replaced the battery in my car?
A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. You might require a key fob replacement or perhaps auto door lock repair if your key fob stops operating after a battery change.
What should I do after changing the battery in my key fob?
The majority of people use their key fob to unlock their car doors and trunk. But what occurs if the battery runs out? You might believe that getting a new key fob requires visiting a dealership or a locksmith, but did you know that you can simply reset it yourself?
This is how:
Find the little button on your key fob first. This is typically found on the fob’s backside.
2. For around 15 seconds, press and hold the button.
3. Release the button after 15 seconds, and your key fob should be reset!
The owner’s manual for your car should always be consulted if you have any issues or inquiries.
Simply press and hold the reset button for a few seconds if your key fob has one. Remove the battery cover and press the tiny reset button on the circuit board if your key fob lacks a reset button.