The Nissan Juke is an excellent vehicle. If you’re planning to change the oil in your used sporty subcompact, be sure to choose 0W-20 or 5W-30 full synthetic oil for the 2015-2018 model years (except for the Nismo RS, which also takes 5W-30).
In This Article...
What kind of oil is in a Nissan Juke?
the S5w-30 oil type for the Nissan JUKE. You ultimately need to replenish your oil. 5,000 to 10,000 kilometers apart is a decent general guideline. There will be problems with the engine if You don’t replace it. The engine needs high-quality oil to operate efficiently. At some point, you will experience oil issues. The engine may fail due to bad oil. A burning smell is a typical issue. The issue needs to be investigated right away to prevent an explosion in the vehicle. Poor gas mileage is a possibility. The engine could make a knocking sound.
Particulars Regarding Oil Weight and Filter
Model years 2015–2018 Except for the Nismo RS, all Jukes should use 0W-20 weight. The Nismo RS’s first generation MR16DDT engine is used in all model years.
In relation to the oil filter:
The 15208-65F0E, not the previously mentioned 15208-9E01A, is the Juke’s official filter. But other than being somewhat higher, the 9E01A filter is the same. The 9E01A is a totally acceptable option and won’t extend past the subframe.
Regarding the drain plug’s crush washer:
The Genuine Nissan brand filters, which are linked above, come with a fresh copper crush washer. You might have to provide the new crush washer yourself if you purchase a filter from a different manufacturer.
What kind of oil does a 2016 Nissan Juke use?
Depending on the automatic transmission, the 2016 Nissan Juke can hold 8.3 or 9.1 quarts (7.85 or 8.61 liters) of transmission oil.
How frequently should a Nissan Juke have its oil changed?
One of the most important and crucial procedures for your car is an oil change. For traditional oil, Nissan advises changing your 2016 Nissan Juke’s oil and filter every 3,000 to 5,000 miles. Changing synthetic oil should be done every 7,500 to 10,000 miles.
A Nissan Juke needs how many quarts of transmission fluid?
About 10 gallons of fluid are required for a 2015 Nissan Juke transmission cleanse to properly clean and flush out the system.
When did Nissan start producing the Juke?
Nissan has been making the Nissan Juke, also known as the Ri Chan ziyuku or Nissan Juku in Hepburn, since 2010. It belongs to the B-segment of subcompact crossover SUVs. Positioned below the C-segment Qashqai, it had its production debut at the 2010 Geneva Motor Show in March. It was then unveiled to North America at the 2010 New York International Auto Show with plans to be offered for the 2011 model year.
In September 2019, the second-generation model—which makes use of the more recent Renault-Nissan CMF-B platform—was unveiled for the European market. It has greater proportions. The Nissan Kicks replaced the model in the majority of areas outside of Europe and Australasia during the second generation.
The word “jukebox” is also the source of the phrase “juke,” which refers to “dance or shift directions while exhibiting agility.”
How do you check the Nissan Juke CVT’s transmission fluid level?
Using a 14mm check bolt located on the transmission’s bottom, you may check the fluid level. The transmission must be level and at an angle of 114 degrees. Then you remove this bolt while the car is still moving. If liquid gently drips out, the level is good; if nothing comes out, more fluid needs to be added.
The definition of 5W 40 oil
Winter is indicated by the “W,” which stands for that season. The number before the “W” denotes the oil’s viscosity (or thickness) at low temperatures, hence the “W,” and the number after it denotes viscosity at higher temperatures (150oC on average), when the engine is actually running.
In comparison to, say, 10w40, 5w40 motor oil has a winter viscosity rating of 5, making it less viscous at extremely low temperatures. It has a hot viscosity grade of 40, making it at high temperatures just as viscous as 10w40 but less viscous than oils like 15w50.