5 quarts of Castrol-EDGE(r) 5W-30 Full Synthetic Motor Oil (Part No. 1598B1)
In This Article...
Nissan Rogue: What kind of oil does it hold, and how much?
Any brand of oil having an api certification mark and a viscosity grade of 5w-30 sae is approved for use in the 2009 Nissan Rogue. According to the SUV’s manufacturer, the engine oil volume is 4.8 quarts (4.6 liters). The advised oil replacement service frequency is every 6 months, or approximately 3500 to 5000 kilometers. In the car, you can use either traditional or synthetic oil, but never both. The conventional fluid is less expensive than the fully synthetic, but you will need to service the car more frequently with the conventional since the viscosity of the fluid degrades over time and loses its ability to effectively lubricate the engine parts.
With 210,545 miles on it, my 2009 Rogue is still smooth and quiet, and I’ve always used mobile 1 10/40 conventional oil in it. In contrast to my sister, who uses synthetic in hers. Due to leaking spark plug tube seals, she had to replace her valve cover twice. She may travel twice as far between oil changes, but the additional miles make her engine run hotter, which causes the seals to dry out. Nissan does not require synthetic, therefore as an old man from the days of three-month, three-thousand-mile oil changes, I offer this advice. Because it satisfied your dad and grandpa, it must satisfy you as well. Synthetic oils encourage laziness.
An engine oil having an API Certification Mark or a viscosity rating of SAE 5W-30 is approved for the 2009 Nissan Rogue. The 2009 Nissan Rogue’s engine oil volume is 4.8 quarts (4.6 liters).
abycat
I would follow the manufacturer change interval and use any well-known brand of Dino. Don’t forget to put a 5w-30 in it. If it’s still covered by warranty, follow the manufacturer’s instructions and, if you have a third-party warranty, make sure they’re satisfied. For your information, I drive my Nissan in the same manner and only do short journeys when I use high-quality syns that I buy on discount. I’ve tried a lot of different brands, and each one provided excessive protection. I can back it up with a few uoas.
What kind of oil is used in a Nissan Rogue?
The suggested oils for the Nissan Rogue have viscosities of 0w-20 and 5w-30 and adhere to LSAC GF-5 and GF-6 standards. What is the top Nissan Rogue oil, therefore, given all of this? Here is what we discovered after conducting extensive research:
For the Nissan Rouge 2022, the top motor oils are:
- Advanced Full Synthetic Motor Oil by Valvoline
- Nissan 0W-20 Genuine Oil
- Advanced Full Synthetic Castrol Edge Motor Oil
- Advanced Full Synthetic Mobil 1 Motor Oil
- Quartz 9000 Total Future 0W-20
The aforementioned motor oils are API SP qualified, meaning they provide the best defense against the four main factors that contribute to auto breakdown: heat, residue, friction, and wear.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
The significance of choosing the proper oil, important considerations when choosing motor oil, and advantages and disadvantages of the aforementioned motor oils will all be covered in the following parts.
How frequently should a Nissan Rogue have its oil changed?
Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. For traditional oil, Nissan advises changing your 2021 Nissan Rogue’s oil and filter every 3,000-5,000 miles. Remember that the easiest way to find out the appropriate intervals for your car is to consult your owner’s handbook and your franchise.
How long does Nissan Rogue synthetic oil last?
For traditional oil, Nissan advises changing your 2019 Nissan Rogue’s oil and filter every 3,000–5,000 miles. One of the most essential and important procedures for your car is an oil change. Typically, synthetic oil needs to be changed every 7,500 to 10,000 miles.
For how long should a Nissan Rogue have its oil changed?
Every 3,000 to 5,000 miles for conventional oil and 7,500 to 10,000 miles for synthetic oil, your Nissan needs an oil change. Depending on the type of oil used, this translates to about once or twice a year. We’ll also talk to you about other factors that may affect how frequently you require an oil change. Learn how frequently you need to have your oil changed by reading on if you live in Palatka, Florida.
What does a Nissan Rogue have high mileage?
On average, a Nissan Rogue may go 250,000 miles before needing pricey repairs. Your Rogue should last 17 years based on an annual mileage of 15,000 miles if it is kept in good condition and used sensibly.
Is it safe to go from synthetic to conventional oil?
Engine components are lubricated using both regular and synthetic oils. This oil shields the engine’s moving parts, preventing damage and wear. There are a lot of misconceptions because most individuals do not grasp the differences between natural and synthetic oils. Today’s majority of car models support both conventional and synthetic oil. Can conventional oil be used after synthetic oil is a perplexing query regarding the oil. This is a question that we will address shortly. Additionally, we will learn more about the benefits and drawbacks of conventional and synthetic oils.
Is it okay to combine synthetic and conventional oil?
You’ve come to the proper place if you have a question concerning motor oil, and this is a crucial question. Jiffy Lube knows oil, after all. Every day, hundreds of drivers are assisted by qualified Jiffy Lube experts in choosing the proper motor oil, including whether to use synthetic or conventional oil and whether it is OK to combine different types of motor oil.
So, is it possible to combine synthetic and conventional oil? Yes. Mixing shouldn’t harm your engine if it’s something you do infrequently. To keep you moving until your next regularly planned maintenance check, let’s assume you wish to top off your oil. If the oil you use has the weight (or viscosity) indicated in your owner’s manual, mixing is acceptable.
Better engine oil: 0W-20 or 5w30?
The most often used lubricant that provides the optimum performance is 0w20 engine oil. When compared to 5W-30 oils, it flows well even at cold temperatures since the lubricant may keep the same viscosity or semi-fluid consistency throughout an engine’s internal structure. Additionally, the ease of use of the oil makes it a favorite among mechanics and vehicle enthusiasts.
Regarding engine oil, the 0w-20 includes unique additives that enable it to be used in both hot and cold climates. It gets thinner in the summer and stays the same throughout the winter. This factor has increased demand for 0W-20 engine oils in the automotive industry. People therefore prefer it over 5W-40 because the oil can thin out throughout the heat.
It should be noted that using 5W-40 in the heat may cause long-term engine harm.
Is there a distinction between complete synthetic oil and synthetic blend oil?
A synthetic blend motor oil combines a combination of synthetic and conventional base oils for enhanced oxidation resistance (relative to conventional oil) and outstanding low-temperature qualities. This is the difference between synthetic oil and a synthetic blend.
Which is preferable, 5W-30 or 0W-20?
Because the lubricant flows more easily, the higher the fuel efficiency, the thinner the oil viscosity. As a result, 5W20 will run similarly to 0W20 once the engine has warmed up, but 0W20 will be more fuel-efficient during startup.
In both colder and warmer climates, 0W20 offers greater fuel efficiency than 5W30. However, 5W20 only performs better than 5W30 in hotter environments.
You can give the engine the protection it needs to last longer by using the proper oil in it. Make sure you do your study before selecting oil to attain the performance level you need.
Owner and primary author of MechanicBase is Magnus. He has been a technician for more than ten years, the majority of which he spent honing his skills in sophisticated diagnostics and troubleshooting. Automotive diagnostic technician certified.
Can I use 5W-30 with 0W-20?
No, you shouldn’t use a thinner SAE grade or a thicker oil for a suggested thinner oil vis-grade if your owner’s handbook calls for a thicker oil. The performance of your car’s engine will be protected and maintained if you use the right viscosity motor oil. Thus, while your vehicle is still covered by its manufacturer’s guarantee, always follow their advice.
**If your vehicle calls for 0W-20, do not use 5W-30; the back number of vis-grade must match or it is not allowed.
Can 5W-20 be used in place of 0W-20?
Fuel economy of 0W20 and 5W20 Low viscosity, high-quality synthetic grades 0W20 and 5W20 can both significantly improve fuel economy. When employed in fair-weather temperatures, their attributes are identical. When utilized in cold temperatures, there is little to no difference between the two variants.
Can I substitute 5w20 for 5w30?
Because the viscosities of 5w20 and 5w30 engine oils differ, it is not advised to use one over the other. The thinner 5w20 oil is primarily created to work well with newer engines.
If you drive a car from the 1995–2003 model year, you should replace the oil as soon as you can and switch to 5w30.
The oil will be too thin and won’t appear to be able to give the engine the necessary protection. Additionally, it will affect any warranties that came with your car.