If the TPMS light is on in your 2015 Nissan Altima, you should first check that all four tires are filled properly. The PSI shown on the sticker in the driver’s door jamb should always be used to fill them. You can proceed to reset the TPMS light once you’ve made sure they are all filled. The TMPS button on the dash needs to be pressed and held while the key is turned to the on position. The light won’t turn off until it blinks three times. You must then drive for at least 10 minutes to let the sensors to adapt to the new tire pressures.
Turn the ignition key to the “on” position and depress the tpms button, typically found beneath the dash, until the tpms light blinks multiple times to reset the tire pressure monitor system in your 2015 Nissan Altima vehicle. Your vehicle’s tpms system should be reset after starting it and letting it run for at least 20 minutes.
In This Article...
2007–2019 NISSAN ALTIMA
All American-made automobiles must have direct or indirect TPMS systems fitted as of 2008 as a result of the TREAD Act’s 2007 mandate.
The Nissan Altima employs a direct TPMS system, which means that the wheels themselves are home to the TPMS sensors. The TPMS sensors will send information to the vehicle’s ECU if one or more tires show low tire pressure. Each tire pressure or an indicator light (low-line TPMS system) will be displayed on the dashboard (high-line TPMS system).
A TPMS relearn is advised to write the new sensor IDs to the vehicle’s ECU when a tire is changed in one or more Nissan Altima tires.
Tire Pressure Sensor Reset
Identify the TPMS system type.
If the direct system is used by your 2015 Nissan Altima, resetting the tire pressure sensors might only require pressing a reset button on the dash or navigating a menu as described in your owner’s handbook. If your 2015 Nissan Altima has an indirect system, it must be reset by a dealer or one you have personally purchased using a magnet or scanning tool. In order to reset some systems, the ignition must be turned on while the reset button is pressed and held down for three seconds within the glove box.
Pump up the tires.
Ensure that all tires are inflated appropriately. All tires must be fully inflated because you are resetting the sensors to “zero,” or else the sensors won’t be properly calibrated and their readings will be off.
Evaluate the battery.
If the sensor in your 2015 Nissan Altima is powered by a battery, make sure it is not dead. The battery should be changed every five years. Since the battery is integrated, in certain cases this necessitates replacing the complete sensor unit.
Make the transponders new.
Every wheel has a unique transponder. Each responder’s location changes when the wheels are rotated, and the TPMS needs to learn their new locations. Although this relearning process varies depending on the vehicle, you can get more information in the TPMS chart in your manual or online. If the valve stems double as tire pressure sensors, it is a good idea to swap them out when purchasing new tires.
Apply the magnet technique.
Press the lock and unlock buttons on the key fob when the key is in the ignition but the engine is not running. Placing a magnet over each valve stem after the initial chirp will cause the horn to chip for each valve in the following order: left front, right front, right rear, and left rear. Make that the driver information center is showing the pressure values.
Utilize the scan tool approach.
The owner’s manual’s TPMS Reprogramming Procedure menu prompts can be followed if no sensors are being replaced.
What does a Nissan Altima TPMS error mean?
What does it signify if your Nissan Altima’s TPMS tire pressure warning light is on?
You should check your tire pressure using a basic pressure gauge for around five minutes since it indicates that the actual tire pressure is either too high or too low.
monitoring the function or performance of each tire by regularly checking its pressure in order to execute timely and appropriate repair.
Keep an eye on the warning light that says “Low Tire Pressure” or “High Tire Pressure” on the dashboard; it’s a useful tool for alerting you to high or low tire pressure.
After removing the valve cap, tap the metal pin inside with your fingernail or a flat-head screwdriver to hear a hissing sound. Deflate it until the appropriate PSI is reached.
You will, however, typically see low tire pressure. A leak, a small puncture, or a fast change in temperature could be to blame for the problem. If so, scroll down to find out how to handle it.
How can I fix my 2015 Nissan Altima’s TPMS?
This is what? Front left tire comes first, followed by front right, rear right, then rear left tires. To reset the TPMS light after completing this process, drive for ten or more minutes at 16 mph or faster. This will fix the TPMS issue. Navara Altima
How can I fix my Nissan Altima’s TPMS?
When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset. Under the steering wheel is typically where you’ll find the reset button for the tire pressure monitor. Check the owner’s manual for your vehicle if you can’t find it.
The meaning of a TPMS fault
The TPMS (Tire Pressure Monitoring System) is designed to notify you when a tire’s pressure is too low and may result in hazardous driving situations. If the indicator is on, your tires may not be properly inflated, which might result in premature tire wear and even tire failure. It’s critical to comprehend the value of appropriate tire inflation and how TPMS can prevent a potentially hazardous situation.
Both excessive and inadequate tire inflation can result in early tread deterioration and potential tire failure. Increased traction, early wear, and an inability to withstand impact from the road can all be effects of overinflation. The middle of the tread on tires with excessive air pressure may prematurely wear out. Underinflation, on the other hand, results in slow tire reaction, lower fuel economy, excessive heat buildup, and tire overload. The shoulders or tread edges of a tire that is underinflated will prematurely wear out on both sides.
Finding the TPMS indicator on your dashboard is straightforward if this is your first time hearing about tire pressure sensors. It is a light that has a horseshoe form with an exclamation point in the middle.
How can you tell if your TPMS sensor is malfunctioning?
A few seconds after starting a car, a TPMS icon will appear; however, if it stays on, it means that at least one tire on the car is at least 25% under the recommended pressure. The TPMS system is malfunctioning if the light flashes continuously for one to two minutes.
AutoZone is able to check TPMS sensors.
You can determine if your tire pressure monitoring system is corroding or failing within your wheel with routine inspection; if so, you will need to replace it. For your repair, AutoZone carries every tire pressure monitoring system item you’ll need, enabling you to drive again efficiently and safely.
In what location is the TPMS sensor?
Where is the location of the tire pressure sensor? It is affixed to the interior of the rim from inside the tire. The tire pressure sensor is a little cylinder that you can see if you take the tire off the rim.
Why are my tires fine but my TPMS light is on?
It’s likely that one or more of your tires have low air pressure if you see the tire pressure indicator turn on. However, even if your tires are in good condition, there are a number of things that could cause the sensors to go off, so you shouldn’t rely only on the data from the tire pressure monitoring system of your car.
Can I drive with my TPMS on?
To avoid seeming like Debbie Downer, we’ll simply say no. Driving around with your TPMS light on is not safe. You can’t tell how quickly your tire is losing air or how long it has been over- or underinflated without doing a tire examination. The best course of action is to check the current inflation level of each tire with a tire pressure gauge.
When the tire inspection light appears while you are driving, slow down and get to the closest gas station or service facility.
What should you do if the TPMS light illuminates?
Find the nearest gas station or service station if your TPMS warning light does illuminate, and check the pressure in all four tires (plus the spare, if necessary). If necessary, add air to any tires that are underinflated to the range specified on a sticker inside the driver’s door.
How much will a new TPMS sensor cost?
Replacement of a TPMS sensor typically costs between $208 and $250. Between $55 and $69 is the expected range for labor costs, while $153 to $181 is the range for part costs. Taxes and other costs are not included in this range, nor are your particular vehicle or geographic area taken into account. Additional fixes could be required.
Is TPMS on the tire or rim?
When the air pressure within the tire lowers, your car’s tire pressure monitoring system (TPMS) will sound an alarm and notify the driver. This is an electronic system that links the monitor on the dashboard of the car with the sensor that is mounted on the rim to display whether the tires are adequately inflated or not.
The TPMS will alert the driver with a flat tire warning light if the tire starts to lose air pressure. This indicates that the tire’s proper inflation level is not being maintained for whatever reason; whether as a result of tire or valve damage, the tire will need to be reinflated and repaired.
These sensors make sure the tires don’t deflate to dangerously low levels, which, if one is not careful, could further harm the tire, the rim, and even the TMPS unit. Due to this, they have been a necessary component of automobile production in the US since 2008.
The service life of tires will be shortened by rapid tread wear caused by improper tire inflation. Lower inflation extends their footprint, endangering their ability to drive safely and increasing pressure buildup while they perform, which will destroy their ability to use gasoline efficiently. The tires’ wet weather performance will also suffer from the broader footprint, which will also lengthen the distance between stops. In other words, it will harm the car’s performance and safety when driving.
How inflated should a Nissan Altima tire be?
Are you concerned about your Nissan Altima’s tire pressure? Perhaps your low-pressure indicator lit up, but you are unsure of how much air your tires require. We looked into the matter, and the following is what we learned.
Tire pressure for your Nissan Altima should be 32 PSI. The majority of year models share the same number. Additionally, it is unaffected by the size of the tires.
You must understand how to check the levels now that you are aware of the recommended tire pressure. Continue reading to learn how to check the air in your tires, how often to check it, whether you can drive with low air pressure, and other topics.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
How long is the TPMS light safe to be on while driving?
Low tire pressure makes the situation worse because it is more difficult to gain traction and roll ahead. Under these circumstances, avoid driving with low tire pressure for more than 40 miles or more than 30 minutes.