We’ve produced in-depth articles about the Nissan Rogue and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the ideal replacement tires or rims for your Nissan today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
All Nissan Rogue generations have a center bore of 2.6 inches (66.1mm), a bolt pattern of 5×4.5 (5×114.3mm), and five lug nuts with a thread size of M12 x 1.25 that must be tightened with 83 lb-ft (113Nm) of power.
That, however, hardly captures the entire picture. For each iteration, we’ve provided a more thorough description of the bolt pattern below. We also go through the individual lugs/bolts used, the center bore hub’s exact diameter, and the bolt torque requirements. Additionally, we have details on the precise tire and rim sizes for each engine type. You should be well aware of what you can and cannot purchase in this manner. Read on!
In This Article...
Which Cars Have a 5 X 4.5 Bolt Pattern?
Vehicles from FORD, MAZDA, LEXUS, TOYOTA, MERCURY, MITSUBISHI, HONDA, DODGE, NISSAN, ACURA, CHRYSLER, INFINITI, and other manufacturers all use the 5 X 4.5 bolt pattern. Below is a complete list of car brands and models.
Travel trailers and utility trailers frequently use the 5 X 4.5 bolt pattern, sometimes known as the “Ford Bolt Pattern” or passenger vehicle bolt pattern. More info on the wheels of a trailer
What is the 2012 Nissan Rogue’s bolt pattern?
The bolt pattern on the 2012 Nissan Rogue AWD SV is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
You should measure from the center of one lug to the outer edge of the lug farthest from it in order to obtain an accurate measurement of your five lug bolt pattern without the use of a bolt pattern tool.
What is the Nissan Rogue’s bolt pattern for 2018?
Check out our Nissan Rogue wheel and tire options if you want to give your Rogue substance and style. There is a 5×114. 3 bolt pattern on Nissan Rogues. That’s fantastic news for you since it gives you a ton of style possibilities for your Rogue because it’s one of the most popular bolt patterns available.
What is the Nissan Altima’s bolt pattern?
We’ve written in-depth articles about the Nissan Altima and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the ideal replacement tires or rims for your Nissan today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
Before 2001, the Nissan Altima’s bolt pattern was 4×4.5 inches (4×114.3mm), while starting in that year, it was 5×4.5 inches (5×114.3mm). They also have a center diameter of 2.6 inches (66.1 mm) and four or five M12 x 1.25 threaded lug nuts that require 83 lb-ft of torque to tighten.
The wheel bolt pattern is what?
A bolt pattern, sometimes referred to as the lug pattern, is the measurement of an ideal circle made up of the lug holes at the center of your wheel, and it is provided in a two-number format. The wheel’s number of bolt holes is indicated by the first number. The second value represents the size of the hypothetical circle surrounding the holes.
Can my Nissan Rogue have larger tires?
Nissan Rogue Tire Size Change Although it is possible to alter the diameters of the wheels and tires, it is generally advised to maintain the same total diameter for the wheels and tires. Therefore, reducing the size of an 18-inch wheel to a 17-inch wheel would require increasing the sidewall of the tire in proportion to make up the difference.
What kinds of car wheels are interchangeable?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.
What is a 5×114-3 fit?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
Is 115 the same as 114.3?
There is a real difference between 114.3 and 115; rounding is not the only explanation. Since 1 inch is precisely 25.4 mm, 4.5 inches are precisely 114.3 mm.
Yes, they are quite close together. When I changed the rear axle bearings on my 1974 Cuda’s 4.5 inch or 114.3 mm bolt pattern, I did learn this. I was looking for anything to press against on the wheel end of the axle and thought, “Why not try these old rotors with a 115 mm bolt pattern off the back of my 2010 Charger?” It did a terrific job of pressing the bearings on, but after I hadn’t checked the specifications, I wondered if they were truly the same. However, if you put the rotor on the hub and pay great attention, you may observe that there is a small discrepancy. I wouldn’t switch out the wheels since, in my opinion, the acorn nuts wouldn’t fit snugly.
Since 4.5″ is 4.5″ after all, I did use Ford rims on our 1992 GC and the same ones on my 1995 Intrepid. The offset wasn’t precisely correct, but it worked and didn’t rub.
You might not get a response because this is an old thread, and you might be restarting an old thread. Consider starting a new thread, please.