The Nissan Intelligent KeyTM system warnings in newer Nissan vehicles will show up as one of the following messages in the information display:
When an Intelligent Key is present but the system does not recognize it, a “Key ID Incorrect” alert is displayed.
If your key fob’s battery has to be changed, a “Key Battery Low” alert can show up.
When the key is left outside the car or the key fob battery is already dead, a “No Key Detected” alert could show up.
When the message “Key System Error: See Owner’s Manual” appears, there is a problem with the Intelligent Key system as a whole. If the warning light comes on while the engine is running, you can keep driving the car, but it is advised that you have your system checked at the nearby authorized Nissan dealer. If this warning shows when the engine is off, take note that you might not be able to start it.
In This Article...
SDEAL5
I experienced the identical issue with both of my keys. When I tested it, my problem was resolved.”
Issue #1: You continue to receive notifications about invalid key ID or no Key detected even after changing the keyfob battery. The door request buttons are likewise inoperable. Most keyfob buttons that open doors remotely still function. By using the keyfob itself to depress the start button, you may start the vehicle. (or on some models, by placing it in the keyfob emergency start receptacle)
Remove the backup door key from the keyfob as a solution. Leave the keyfob inside the vehicle as you get in. two times on the start button (to cycle from OFF to ACC to ON). NEVER apply the brake! Leave the Keyfob in the vehicle now, but take the spare door key with you. After inserting the backup door key into the lock, close the door. To lock the driver’s door, turn to the left. The locking mechanism will make a noise. To unlock the door, turn the key to the right right now. You’ll hear the unlocking mechanism once more. Now you may take the door key off and go back in the car. To switch it to the OFF mode, press the start button once more without touching the brake. Everything should now be operating normally and no longer display the Invalid key ID notifications.
Problem #2: This issue is essentially the antithesis of the first. With the exception of the keyfob’s push button functionality, everything functions normally. There is no functionality for the remote door lock, panic button, remote trunk release, or remote start (if available).
Solution: With the keyfob inside the car, the ECU (main computer) needs to be restarted. If the keyfob is inside the vehicle, the push button functionalities are reprogrammed during a cold boot of the ECU. The main battery under the hood must be temporarily disconnected, then reconnected in order to do the cold reboot. The car may idle a little differently for the first few miles of drive since disconnecting the primary battery will remove the learned settings from the ECU. It will soon get back to normal.
You normally won’t need to perform either of the aforementioned procedures if the keyfob’s battery is changed before you start experiencing sporadic issues. The internal memory of your keyfob, however, can get corrupted if the voltage drops to an extremely low level, and simply changing the battery could not restore proper operation.
Finally, it has been reported that by leaving both keyfobs inside the vehicle while executing either of the aforementioned procedures, both keyfobs can be reprogrammed simultaneously for either issue. I can’t confirm that because I’ve never needed to work on more than one keyfob at once, but it seems like it should work.”
The key ID is wrong
When an Intelligent Key is present but unable to be recognized by the system, this signal appears.
Three key factors can account for such a difficulty. Due to the key fob’s batteries being dead, it arrived first.
Therefore, the automobile will alert you that the key ID is invalid even though you are holding your key fob.
In such a case, changing the battery will take care of the issue. As you perform your replacement, keep in mind that a Nissan Rogue key fob can only be powered by a 3V coin battery.
Checking to check if your key fob has any damage is another thing to think about when the Nissan intelligent key warning light is on.
Additionally, it’s possible that your key fob hasn’t yet been paired with the vehicle. You can program your own Chevy HHR key fob to reprogramme it if necessary.
Key system error: What does it mean?
When the message “Key System Error: See Owner’s Manual” appears, there is a problem with the Intelligent Key system as a whole. If the warning light comes on while the engine is running, you can keep driving the car, but it is advised that you have your system checked at the nearby authorized Nissan dealer.
Why is my Nissan not accepting my key?
Even if the battery in your Nissan fob is still good, there may be times when the car doesn’t recognize it. The battery is usually either dead or low, but your Nissan’s remote key functions could not be working properly. Reach out to our service department and we’ll be pleased to help if changing the battery doesn’t work.
How can my Nissan key be reset?
Reprogramming Nissan Intelligent Key Fob The doors must be secured with locks. Do not turn the car on after inserting the key. Take the key out and carry out this action around six more times. Keep in mind that success might not come for up to ten attempts.
What do I do if the battery in my Nissan key dies?
You can resume using the key fob to start and enter your car once the battery in your Nissan smart key is replaced. The steps to follow to change the battery in your key fob are as follows:
- When the battery died, you could still enter your Nissan by using the concealed key.
- Remove the old battery and the key casing.
- Place the negative side of the CR2025 battery upward before replacing it.
- Reassemble the key fob and give it a try!
Can my Nissan be started without a key fob?
However, if the Nissan key fob battery alone needs to be replaced, your Nissan might still start even with a dead key fob battery: Put the key fob in the port if your Nissan car, truck, or SUV has one, then push the START/STOP button while tapping the clutch or brake pedal.
How is a Nissan key fob push start reset?
Any button on your keychain fob should be pressed and held until the door locks start to flash. It ought to take three seconds or so. Release your programming button as soon as the lock lights stop flashing. A continuous light that indicates that the key fob has been programmed should then appear.
Why does the battery in my Nissan key fob keep dying?
When our technology malfunctions, it is annoying. Frequently, it is as a result of a dead battery. There are a few typical causes of battery death. For instance, incorrect use or storage might cause a battery to deplete. It might also have simply reached the end of its life! Each battery is unique. Although your key FOB might be dead for this reason, it might also be dead for another cause, in which case you might need to get creative.
How can I exit security mode on my Nissan?
Put the key into the door lock as the first step. Use the side door on the driver’s side and put the physical key into the lock even if you have a keyless car and don’t frequently use it.
Tip: The majority of key fobs—if not all of them—contain a real key. Look for a button that releases the actual key from the fob so you can slide it out.
Step 2: Rotate the car key to open the door without opening it. Keep the key in this position for 30 seconds. By doing so, you will let your car’s security system know that you have the right key and can disable the alarm.
Some vehicles can be accessed by merely twisting the key in the door’s cylinder back and forth. To disable the anti-theft system, it is advisable to attempt both holding the key in the door and twisting the key in both directions.
Step 3: Attempt to start the car. Remove your car’s key from the door and attempt starting the engine. Make sure the door cylinder is still in the unlocked position as you do this, though.
Why doesn’t my automobile recognize the key fob I have?
Key fob battery failure The most frequent cause of a keyless entry system failing to send signals is a faulty battery in the key fob. Use the extra key fob to unlock the car and turn on the ignition if one is available. Use the key that is included in the spare fob if it is not available to unlock the door.
Which battery type does the Nissan key fob use?
Although replacing the key fob battery on your Nissan model is a simple procedure, it does require handling delicate and sensitive electronics. Make sure to use gloves to prevent harm to the key fob (latex or non-latex substitute). The CR2032 3V battery is used in the Nissan key fob. Typically, a multipack of them costs less than $5 USD. A tiny flathead screwdriver is also required.
- Nissan key fob flipped over to the rear
- Slide the little lever to release the emergency key.
- Delete the emergency key
- Find the open slot between the front and rear portions of the key fob on its top.
Why doesn’t my automobile recognize my key?
The key fob won’t be recognized by your car because the remote’s battery is dead. The actual remote is damaged or is no longer programmed to your vehicle. Low automobile battery voltage. The keyless entry system is broken.
What does the warning light for the key mean?
This light turns on if the vehicle’s control modules detect that the ignition is being turned without a key present, that the key battery is weak, or that there is a security flaw in the system.
How long does the battery in a Nissan key fob last?
The battery in your car’s fob or remote will eventually need to be replaced, just like any other battery. A car fob battery should typically last three to four years. In addition, there are several indicators that will let you know when your fob battery is running low.
Signal strength loss is the initial symptom. The majority of contemporary fobs can communicate with your car up to 50 feet away. But as your battery ages, the signal’s intensity and range will decline. Another indication that your key fob battery needs to be changed is that you are having to push buttons to lock and unlock doors repeatedly.
What does the symbol of the car with the key inside mean?
The car’s internal battery is probably dead and needs to be replaced if the key is inside. The vehicle can be started when the same Electronic Key symbol, depicted in green, appears. Another style signaling a concern is the final one, which is yellow or amber.
What happens if the battery in my key fob dies while I’m driving?
My car’s key fob seems to be coming in and going out, though. I know I merely need to replace the battery, but I don’t have much free time. What if the key fob entirely fails while I’m operating the vehicle?
In less than two minutes, find out if your auto insurance is being overcharged.
This issue has been foreseen by automakers ever since the key fob was created. Nothing will happen if your key fob dies while you’re driving. Simply because the key fob is a locking and starting device only, the automobile will continue to run. The key fob has no influence over the ignition or engine once the automobile is moving.
If time is of the essence, you should be aware that changing the battery in your key fob just requires two minutes, albeit you will need to visit a general store or pharmacy to obtain the battery.
Why not change the battery in your car insurance at the same time as you replace the one in your key fob?
You can access a new quotation with just a few taps on your phone screen by downloading the Jerry app and answering a few questions.
Jerry assists you in finding and comparing rates from more than 50 leading suppliers in minutes as a licensed broker. Jerry can assist you with purchasing new insurance and even canceling your existing policy when you find a lower rate.