One red jumper cable clamp should be attached to the dead battery’s positive terminal. The positive terminal of the functioning (live) automobile battery should be connected to the opposite end of the same wire, the second red jumper cable clip. Connect a single black jumper cable clip to the battery’s negative terminal on the running (live) automobile.
In This Article...
How are jumper cables connected to a Honda?
- Prepare both vehicles. Put the parking brake on, turn the ignition off, and put the cars in park or neutral before opening the hoods. The vehicles shouldn’t be in contact.
- There are four sets of alligator clips on your jumper cables. Black is negative and red is positive. The right way to use your jumper cables is as follows:
- RED to DEAD: Attach the red clip to your dead battery’s positive line.
- RED to DONOR: Join the red clip to the active battery’s positive terminal on the donor car.
- DONOR to BLACK: Same vehicle! Connect the black clip to the donor vehicle’s functional battery’s negative terminal.
- Back to the dead battery, from BLACK to METAL. The black clip should be attached to an unpainted metal bolt or bracket on the dead car that is not right adjacent to the battery.
- Start the working car’s engine, and then let it run for one to two minutes.
- In order for the dead battery to recharge, start the automobile and let it run for a few minutes.
- Drive your revived car for 30 minutes so it can recuperate for the next time before removing the cables in reverse sequence.
If the battery in your car keeps dying, it could be time for a replacement. To arrange a service appointment and place an order for components, call our service professionals or use our online order form. Let us handle the routine upkeep and repairs on your car!
Tip #2:
When jumpstarting your car, be careful to adhere to the owner’s manual’s directions. Every automobile is unique. Believe us. We’re experts.
Attention: Under no circumstances should you attempt to connect any unsecured wires. Leave the dangerous stuff to us unless you are a trained technician. It’s incredibly simple to short out pricey computer components and put yourself in danger if the wiring is handled improperly.
How exactly should jumper cables be used?
Connect the cable’s negative end—typically black—to the battery’s negative connector. A ” sign is typically placed on the booster car to indicate this. The negative cable’s other end should be connected. Make sure the engine of the deceased car has it fastened to a metal surface that isn’t painted.
What happens if jumper cables are connected incorrectly?
The quantity of electrical current flowing through the jumper cables is dramatically increased when you reverse their polarity. The cables could therefore melt or possibly catch fire.
Can a car be damaged by a jump start?
The electronic systems of a modern car can be harmed by a power spike, much like most electronics. A seemingly innocent jumpstart may result in the power surge mentioned before, which may affect the performance of the onboard computers and safety features, harm the engine, and necessitate costly repairs.
The recognized battery experts have examined numerous vehicles that consumers have brought in over the years after attempting to jumpstart them. Among the damages were
Engine Control Unit Blown (ECU)
If there is a voltage surge during jumpstarting, a blown ECU may result. The alternator and other electrical parts, including the fuel pump, onboard computer, and perhaps the fuses, are affected by this.
traction control systems with compromises
Always follow the manufacturer’s directions when jumpstarting a vehicle with traction control. Failure to adhere to these guidelines may result in degraded traction control, unstable road grip, and potential hazard to the driver and other drivers.
harm to power steering
The power steering system may be compromised if the manufacturer’s recommendations are not followed, making maneuvering your automobile more difficult than usual. This might be hazardous.
Bugs in the airbag system
Modern vehicles may have airbag system instability after a starter, which might cause the airbags to malfunction and fail to deploy. The results can be disastrous.
Start/Stop systems that are inconsistent
The majority of contemporary automobiles have Start/Stop technology. If you jumpstart your automobile improperly, the Start/Stop system could be disabled, necessitating further inspection at a dealership. It is not suggested to jumpstart a car with Start/Stop technology because the battery is made specifically for that vehicle.
Injury to the boosting vehicle
When a newer vehicle is used to jumpstart an older one, the newer vehicle may experience a power surge that damages its pricey electronic equipment.
Contact South Africa’s reputable battery experts if you need to jumpstart a newer vehicle instead. They will not only point you in the right direction for your nearest branch, but they will also analyze your car battery for FREE and give you recommendations for a replacement battery that is especially made for your vehicle.
To give you the greatest user experience and the most recent information, this website uses cookies. Accept Information about
Privacy Overview
Cookies are used on this website to enhance your experience as you navigate it. Out of these, only the cookies marked as mandatory are saved on your browser because they are important for the operation of the website’s fundamental features. In order to better evaluate and comprehend how you use this website, we also employ third-party cookies. Only with your permission will these cookies be saved in your browser. Additionally, you have the choice to reject these cookies. However, disabling some of these cookies can have an impact on how you browse.
How high can a 2017 Honda Civic be jumped?
How to Jumpstart a Honda Civic LX 2.0L 4 Cyl. Sedan from 2016 to 2019
- Access the battery to find out where it is.
- Jump Points: Find the ground and the positive terminal.
- Jumping Procedure: After properly connecting the jumper cables, jump.
- Replace the lid, being sure to do so correctly.
Where should black jump lead be placed?
The first step is to park the other automobile close to the vehicle with the flat battery such that the two vehicles are not in contact but the batteries are. Both vehicles should have the handbrake on and be in neutral, with the ignition and electrical equipment turned off. Open the bonnets now.
The flat battery’s positive terminal should receive one end of the red jump lead. No metal from the car may come in contact with the lead. Connect the other end of the red lead to the positive terminal of the boosting battery.
Take the black lead, and attach one end to the negative terminal of the boosting battery. A metal bracket or bolt on the engine block of the vehicle with the flat battery should be attached to the other end of the black lead. The lead and battery need to be separated by a fair amount.
Make sure that none of the moving components of either engine will come in contact with the jump leads. Watch for the voltages to equalize for three minutes. Start the booster car’s engine now, and allow it to idle quickly. Next, start the car’s engine while it has a dead battery to make sure it is operating correctly.
Turn off the booster car’s engine. Turn on the heater, blower, heated rear window, and lights in the car with the flat battery to avoid voltage spikes. If you’re worried about this, a different strategy is to shut off both engines after ten minutes of driving with a flat battery. Now the jump leads can be detached in the opposite direction from when they were attached, taking care to avoid letting the clips come into contact with any metal. After completing this, you can close the bonnets and turn off everything.
You should be able to start your car and leave now. Avoid stalling the engine or stopping it too soon because it takes time for the alternator to fully charge the battery.
Before you can save searches, you must create an account. The registration process takes around a minute.
Why won’t a jump start work on my car?
Ever ponder the cause of a non-starting car? A weak or dead battery could be one of the causes. Use a battery tester to check the battery’s strength if it can measure cranking amps. If the battery cannot be tested, attempt jump-starting. If the car starts immediately away, a dead battery is most likely the cause of your issue. To guarantee proper contact, charge the battery and clean the terminals and cable connectors. If you try to jump-start your automobile and it won’t start, your starter, alternator, or another electrical system part may be broken. Make careful you read and abide by all handling and safety directions provided on the battery on our website.
What is the time required to jump a dead battery?
Jumpstarting your car should only take a few minutes once the cables are connected. like five minutes at most in regular circumstances and thirty minutes in dire circumstances. After starting the car, you must drive for at least 15 minutes for the battery to fully recharge.
How can a dead battery be jumpstarted?
- If it still won’t start, there might be an additional issue. For assistance, dial a nearby service station.
- Next, attach the negative cable to the good battery’s negative terminal.
- Clamp the positive cable’s first end to the positive clamp on the dead battery.
- The other end of the negative line should then be connected to a ground on the car that has the dead battery. The engine block or similar metal surface far from the battery can serve as this. While doing this, take care not to touch the cable’s two ends together.
- Now have a buddy attach the other end of that cable to the positive clamp of the other battery.
- Place the vehicle you’ll be using for a jumpstart next to the vehicle with a dead battery, close enough for the cables to reach. The cars shouldn’t be in contact with one another.
- If the problem vehicle does manage to start, let it run for at least 20 minutes to give the battery time to recharge before turning it off.
- With the weak battery, start the vehicle. Check your connections and tighten or clean them as necessary if it won’t start.
- Reverse the order of the cables’ disconnection.
- Launch the emergency vehicle that is supplying the electricity.
- Switch off the engines of both vehicles.