The location of the VIN stamp depends on the car model. The VIN is typically found either in the front left wheel well or the back left lower frame rail of ATVs manufactured from model year 2011 onward.
In This Article...
When did Honda start producing the 450 Foreman?
A high-performance all-terrain vehicle, the Honda Foreman 450 was first produced in 1998 and continued to be produced until 2004. It came in two variations: the manual-shift Honda Foreman 450 S and the electric-shift Honda Foreman 450 ES, and was regarded by Honda as its most popular and potent ATV. The Honda Foreman 450 ES was named the ATV of the Year by ATV Magazine the same year it was released, reflecting the growing popularity of automatic gearboxes in the industry.
This multi-purpose equipment accomplishes a variety of tasks more effectively, from pig farms to banana plantations to golf courses. It is dependable and utilized for crossing water, muddy fields, sandhills, woodland treks, and rough highways. Some aficionados believe it performs far better than a Polaris Sportsman and a Yamaha Grizzly.
How can I determine the year of my Honda ATV?
Honda ATVs come equipped with a Vehicle Identification Number (VIN), which can be used to track an ATV’s history all the way back to the factory and even to the precise moment it left the assembly line. The year of manufacturing, make, and engine type are also included in the VIN, along with a check digit in the center to avoid vehicle identity fraud.
Items you will need
Locate the ATV’s VIN number. This is typically installed on the frame close to the bottom. It has 17 digits in total.
Take a look at the first three numbers. These stand for the WMI, or World Manufacturer’s Identifier.
The nation of origin is indicated by the first digit. If the first digit is a 1, the ATV was made in the United States. If it begins with a J, your Honda was manufactured in Japan.
Honda’s second digit will be an H. The vehicle type or production division is represented by the third digit. This may be an M, for example, for the motorcycle division, or a 3 or 5, for example, for an all-terrain vehicle.
Use the group of the following five integers (four through eight). The Vehicle Description Section of these numbers contains information on the ATV, including its series, model, and engine type.
Track down the ninth digit. Consider this number alone. It can be linked back to the ATV by the manufacturer and has been assigned to guard against fraudulent vehicle identification.
Verify that the 10th digit corresponds to the manufacture year. Before 2000, it was a letter; starting in 2000, it is a number. The letter W, for instance, will be at the tenth place on a 1998 model.
Using the 11th digit, identify the factory where the ATV was produced. A stands for the Ohio factory in the United States, B for the Aalstd factory in Belgium, C for the Saitama factory in Japan, D for Guadalajara in Mexico, E for Montesa in Spain, F for Atessa in Italy, K for Kumamoto in Japan, M for Hamamatsu in Japan, R for Manaus in Brazil, S for Suzuka in Japan, T for the Japanese Tochigi plant, and 4 for the South Carolina factory in the United States
To view the ATV’s special production sequence, use the last six digits. This can be used to recall products if only some of the production was impacted by a problem and can show you when your ATV rolled off the assembly line.
The Honda Foreman: An Excellent ATV
Made for arduous labor and long distances
The Honda Foreman 500 is capable of handling any challenge. As the best workhorse available, it provides great performance and off-road ability. You could then be wondering what else it is capable of.
The Honda Foreman 500 is acknowledged as one of the most popular ATVs ever produced. It is a well-liked option for farmers, ranchers, construction workers, and trail riders because it is durable and dependable. In any circumstance, the electric shift, power steering features, and flawless 4WD offer great service.
How can you check an ATV’s VIN number to discover whether it was stolen?
As the service used by insurance companies and police departments to report stolen automobiles, NICB is likely your best option. To help the public determine whether an ATV or any other vehicle has been stolen but not found, NICB provides a free service.
Look for the ATV VIN
A unique identifier used to identify each individual motor vehicle, including all-terrain vehicles, is known as the VIN (also called three-wheeler, quadricycle, quad, four-wheeler or four-track). The letters O (o), I I and Q (q), which can be confused with the numbers 0, 1, and 9, are not part of this 17-character VIN. All ATV manufacturers adhere to a uniform format.
- The manufacturer appears as the second digit.
- A verification of the accuracy of the previous characters’ manufacturer authorization is provided by the ninth digit.
- The third character serves as a vehicle identification code.
- One of the manufacturing codes is 11.
- The serial number is represented by the 12th through 17th characters.
- The country code appears as the first character.
- The engine size, engine type, and engine model are represented by the fourth through eighth characters.
- The tenth digit represents the year.
Where to find the ATV VIN number
ATV locations differ depending on the manufacturer. It is frequently (though not always) found under the shifter on the left side of the frame, which is a rather simple place to look. Perhaps this explains why ATV builders frequent the area. Other places might not be as simple to find:
- through the plastic hood’s slit
- close to the left wheel (inside the left wheel well by the radiator or behind the left wheel well on the frame)
- In the frame beneath the tail portion, engraved
- the frame’s left side, next to the engine
The most popular manufacturers’ typical VIN positions are shown below (in no particular order):
embedded on the front crossmember, which is located in front of the rack. (Unless you are utilizing special skid plates, it should be simple to find.)
Near the front of the car, typically on the left side under the shift lever.
It is located on the front left wheel well on more models. Additionally, the left or right rear frame may contain it.
Usually written on a label found inside the passenger-side front wheel well or under the glove box.
The VIN is also listed in the following documents:
- registrations for vehicles
- dealer’s original bill of sale
- insurance documentation
- Names of vehicles
How can I verify an ATV’s VIN number?
The 17-digit VIN serves as a code or ID for a particular vehicle. ATVs and vehicles both use the same code. It depends on the manufacturer, but generally speaking, the VIN is imbedded on the frame, on the left side of the ATV, underneath the shifter, in an open area.
Honda
For Honda ATVs, the VIN is typically incorporated into the front crossmember, which is typically constructed behind the front rack. If you are utilizing bespoke skid plates, though, you might not be able to see it clearly. But you can rapidly unwind it to reveal the VIN.
The VIN is situated on the crossmember constructed at the front of the Honda Rancher ATV.
Kawasaki
On the left side of the frame, underneath the engine, is where the Kawasaki AVN’s VIN is permanently affixed. However, if your nerf plates are fastened, you can have trouble seeing the VIN. Be careful when searching for the VIN because it is simple to confuse it with the engine number even though they are two distinct things.
A 2004 Honda Foreman has fuel injection, right?
Throughout its run in production, the Honda Foreman 400’s configuration remained unaltered, although it saw a number of improvements, including the following:
- With a revised dry weight of 573.3 lbs, the Foreman has gained weight as a result of minor dimensional adjustments.
- Foreman models have access to EPS (Electronic Power Steering), TraxLok, and PGM-FI (Programmed Fuel Injection) from 1998 to 2004.
- On the 1995 model, the Goodyear Tracker ATT stock tires were replaced with Dunlops.
- The 1998 Honda Foreman 400’s engine displacement went from 395 to 432.6 cubic centimeters, a little increase.
- From 4.33 to 5.9 inches more suspension travel was added at the front and rear.
- The speedometer on the dashboard was replaced by a complete LCD that displayed the trip meter, the odometer, and the speedometer.
- Additionally, the seat height rose by 3 inches, from 30.9 to 33.9.
- Both total length (from 76.5 to 77.2 inches) and height (from 42.5 to 45 inches) increased.
Without a key, how do you start a Honda four-wheeler?
Enjoying your quad shouldn’t be hindered by misplacing or forgetting your ATV key. I’ll demonstrate a few methods for starting your ATV or UTV without the key in this article. Any of these techniques can be completed with the common hand tools accessible in garages.
Your ignition switch is only a circuit break that signals to your electrical box whether it is safe to start the vehicle or not. Power cannot be transmitted to the remaining parts required to start the engine when the key is not in the ignition. But there are some rather easy workarounds for this.
Of course, if your machine has a pull start or kick starting on it, that is the simplest method. Unfortunately, a lot of the more recent quads being produced no longer have this functionality. If you have this choice, just disconnect the ignition switch from the electrical box or cdi. In this manner, the engine will start without requiring the key to be inserted.
If you can push your machine to a good pace and get it into gear, this method might work without a pull start or kick start. Other choices you have are:
- Screwdriver, please
- the solenoid, jump
- Ignition Switch Replacement
- Override the Ignition