What Sets Off the Check Engine Light on a Hyundai? In general, the Hyundai check engine light acts as a “catch-all” to inform you when your car needs maintenance. It could start as a result of a serious problem or it might just light up because your gas cap is unfastened.
In This Article...
SERPRESULT
Hyundai Check Engine Light Frequently Occurring Issues * Loose Gas Cap: Your gas cap is loose, cracked, or just missing
Other frequent causes of a Check Engine Light include an issue with the fuel injection system, a filthy mass airflow sensor, a bad head gasket, and a damaged oxygen sensor.
There are numerous common causes for a check engine light, including a filthy mass airflow sensor, a bad head gasket, a problem with the fuel injection system, and defective ignition.
Steps to take if your check engine light is on
As you proceed, the check engine light on your Hyundai begins to illuminate. What might this indicate, and what ought you to do? Not to worry! Regardless of how big the issue is, it does require treatment even if it turns out to be a very little one. Service by Faulkner Hyundai is available.
When your check engine light illuminates, it means that your car’s onboard diagnostic system, often known as OBD, has identified an issue that could have an impact on how your engine operates. Your check engine light may indicate a number of issues. It can indicate a broken or missing gas cap, a malfunctioning oxygen sensor, a catalytic converter that isn’t working properly, a broken mass air flow sensor, or a cylinder that misfired. If you’re unsure, schedule a service appointment with us today, and we’ll determine the issue and have it resolved right away!
Your check engine light cannot be reset by pressing a single button. If the issue doesn’t come up again, the indicator will automatically turn off. If the light doesn’t go out, you should have it scanned to stop the issue from getting worse.
The Service Department at Faulkner Hyundai Philadelphia offers a thorough examination of your OBD system to identify the precise source of the issue and lower the cost of your repairs. The inspection reading is used to identify the cause of the light’s activation and what is required to resolve the issue. Misdiagnosis of the source of your check engine light may result in expensive repairs.
You can trust the skilled experts at Faulkner Hyundai Service to identify the cause of your check engine light and maybe save spending a ton of money on needless items. If a part isn’t absolutely necessary for your car, we won’t sell it to you.
To schedule a diagnostic test if your check engine light is on and you want to figure out what the issue is, call the service center at Faulkner Hyundai Philadelphia.
Causes of Check Engine Light Illumination
Whether your check engine light is solid or flickering may indicate the cause of the illumination. For instance, if the check engine light is on completely, it is probably alerting you to an engine emissions issue. However, if the light is flashing, it can point to a much worse issue.
How can a Hyundai’s check engine light be reset?
You might have requested for assistance with a computer problem if you’ve ever worked in an office setting with an IT department.
Probably the first thing your IT wizard asked was, “Have you tried resetting your computer?”
The analogous repair for a car’s check engine light is the on-off technique. It compels the computer to reboot and restore its previously saved state.
Simply switch the ignition on for 1-2 seconds, then off for 1-2 seconds, using your key. Three or four times through, repeat this step.
If the check engine light is still on after the reset, your car might still be having issues. Think about using the OBD2 scanner to check for the error code or taking your car to a qualified repair.
My car runs great, so why is my check engine light on?
Even when the automobile is running smoothly, the check engine light will occasionally appear. There are a few potential explanations for this. The O2 sensor is likely to be at fault if there is an issue with the vehicle. Modern automobiles frequently experience this issue, which is also a pretty simple one to resolve. Gas caps have a limited service life but are rarely replaced by owners or dealers, so that could possibly be the problem.
However, there are times when an automobile may be running just fine without any problems at all. A false alert caused by the check engine light. There’s a strong possibility that a computer malfunction caused the check engine light to come on if the code reader shows a nonsense code or shows no codes at all.
You can use a code reader to remove the code from the system once the issue has been rectified. There’s a strong possibility you fixed the issue or there was never one if your car keeps running smoothly and the check engine light does not turn back on within a few days.
I have a Hyundai, can I drive it with the check engine light on?
A constant glow normally denotes something less serious, but a check engine light that flashes suggests your car’s engine is seriously damaged and needs quick repair. We strongly advise avoid driving your Hyundai if the check engine light is flashing, and book Hyundai servicing right away.
When the check engine light comes on, what should you check first?
1) Examine your gauges for any signs of low oil pressure or overheating in your car. Turn off your car if either of these problems is present to stop further harm.
2) Check the battery and charging system for damage. If the battery dies, your car will not start.
3) Inspect the fan, alternator, and serpentine belt. These parts are all essential to your car’s charging system. Regular oil changes should always include a belt inspection, which ABS Unlimited always performs.
Make sure there is a connection and that it is free of corrosion or wear by inspecting all cables to ensure that adequate connections are kept.
Maybe there’s no need for concern? Your check engine light will also come on if your gas cap is unsecured. Tighten the gas cap if you recently purchased gas. Try turning the car off, tightening the gas cap once more, and then turning it back on to see if the check engine light goes out right away. Resetting the sensor can occasionally take more than one attempt.
What does the Hyundai’s yellow engine light signify?
What Sets Off the Check Engine Light on a Hyundai? In general, the Hyundai check engine light acts as a “catch-all” to inform you when your car needs maintenance. It could start as a result of a serious problem or just because your gas cap is unfastened.
What causes the check engine light to appear most frequently?
The oxygen sensor is the same way. This important component measures the amount of unburned oxygen present in your car’s exhaust, and if there is too little or too much, it may harm other engine components. Every time an oxygen sensor fails, a check engine light will come on. In fact, it’s among the most frequent causes of a check engine light appearing while you’re operating your car.
Why is my engine light on when there doesn’t seem to be a problem?
On a Monday morning, you start your car since you’re rushing late, only to be greeted by a “check engine” light. You ponder whether this is something that needs to be taken straight away to the mechanic or if it can wait a while.
We’ve all been guilty of leaving our check engine light on for days or even weeks. How can we tell whether it is a serious issue or something trivial, like low wiper fluid?
The check engine light may come on for a variety of reasons and may indicate a minor or serious issue. If it does so while you are driving, don’t become alarmed. Keep an eye on how your car is acting. Utilize your senses to hear for any odd noises and look out for any trembling or surging. Check your steering and brakes. It should be safe to drive until you can get it into a mechanic if nothing seems to be acting strangely.
In some cases, if the gas cap is a bit loose, the light might turn on after filling up. It can also indicate that you should have your catalytic converter checked. In either case, ignoring a problem indefinitely is never a wise choice. It might make whatever is wrong with your car worse, which could result in a serious issue.
Take it to Accurso Auto Repair when you have time so they can examine the problem. To connect the car, examine the codes, and identify the issue, they have the right equipment and cutting-edge technology.
When should I start to worry if my check engine light is on?
Depending on the issue, if the check engine light comes on, it may flicker or be on all the time. A issue that requires immediate attention is indicated by a blinking light, or in some cars, a red light instead of a yellow or orange light. In either case, you ought to have the car looked at by a mechanic.
An engine misfire that is severe enough in late-model cars to send unburned fuel into the exhaust system, where it can quickly destroy the catalytic converter and necessitate an expensive repair, is typically indicated by a blinking light. If that occurs, you should turn down the engine and get the automobile or truck checked out as soon as you can.
Even if there is no immediate danger if the light is steady, you should make an appointment as soon as feasible. Even while your fuel mileage may be declining and your vehicle may be spewing unsafe amounts of hydrocarbons and other pollutants, you might not notice a decline in performance since modern automotive systems frequently try to adjust when there is a problem.
According to Jim Collins, a national training team leader for Ford Motor Co., “The customer is really, in the long run, potentially hurting their pocketbook by leaving that light on and ignoring it.” The car’s computer may in some severe circumstances lower power for you in an effort to lessen the likelihood of damage.
Here are some recommendations on what you should do if the check engine light illuminates:
- Search for a critical issue that need quick action. Look for any warning signs of low oil pressure or overheating on your dashboard in the gauges and lights. These circumstances call for you to stop and turn off the engine as soon as you can find a secure location to do so. On some cars, a yellow check engine light indicates troubleshoot, while a red one commands immediate stopping.
- Possibly tighten the gas cap. This frequently makes the issue go away. The light might not reset for a while, so keep that in mind. Some automobiles feature a secondary indicator that sounds when the gas cap is loose.
- Reduce the load and speed. Reduce your speed and make an effort to lessen the demands on the engine if the check engine light is on or you notice any major performance issues, including a lack of power. For instance, it would be wise to put an end to hauling a trailer. Get the car evaluated as soon as you can to avoid costly damage.
- If any built-in diagnostic tools are available, use them. Many contemporary vehicles feature built-in remote diagnostic capabilities that allow for reporting on fault codes and scheduling an appointment for service. Today, numerous automakers offer remote diagnostics and the option to book a service appointment, including Fiat Chrysler, Ford, Hyundai, Jaguar/Land Rover, and Volvo.
Will the check engine light automatically turn off?
If the problem that caused the check engine light to come on is fixed, the light will go out automatically. Consequently, if your converter is subpar and you frequently drive in stop-and-go traffic, which puts a lot of strain on the converter, it may have caused the check engine light to come on.