Depending on which comes first, the Honda Pilot timing belt needs to be serviced every 105,000 miles or seven years.
In This Article...
How much does a Honda Pilot timing belt replacement cost?
Belts don’t cost a much by themselves. Since many pieces must be removed in order to reach the belt, labor is where the true expense lies. Your best chance is to shop about and compare prices, but be prepared to pay anything between $409 and $919. (including parts and labor).
How much does a new Honda timing belt cost?
One of your Honda’s engine’s most important parts is the timing belt. Unfortunately, a lot of drivers fail to notice it. The expense of replacing the timing belt can be high; it normally ranges from $500 to $1,000.
Honda stopped using timing belts in what year?
All Civic cars from 2006 and later lack a belt. They already have a timing chain, so it won’t need to be changed. Therefore, if you’re looking for a timing belt for a 2019 Honda Civic, for instance, you’ll discover that it actually has a timing chain.
Are Honda Pilots equipped with a timing belt or chain?
Timing belts are standard on all Honda Pilot engines from model years 2003 through 2021. From 2003 to 2021, every Honda Pilot engine is an interference.
In a combustion engine, the timing belt (or chain) maintains the correct synchronization between the various engine parts.
Serious engine damage may result if the belt or chain strains or breaks.
Timing chains are typically rated for the lifespan of the engine, while timing belts have a suggested replacement interval, however they do need to be inspected on occasion.
Understanding the timing system in your car or a potential purchase might help you save future costs and hassles.
To enhance your experience, we and our partners collaborate to exchange information about how you use our website.
How long does a 2014 Honda Pilot timing belt replacement take?
At 105,000 miles, the Pilot’s timing belt needs to be replaced. The belt itself costs $60, and the labor to change it takes roughly 3.5 hours.
How can I tell if my timing belt needs replacement?
Your timing belt may be significantly damaged if you hear a ticking sound emanating from the engine of your car. Your car’s timing belt is connected to the crankshaft and camshaft of the engine through a number of pulleys. The connecting rods of the engine, which are connected to the pistons inside the combustion chamber, provide power. The rocker arm assembly and cylinder head valves are controlled by the camshaft, which delivers gasoline to the combustion chamber. The exhaust manifold is the next point of exit for the released gases. Your car’s timing belt may start to twitch inside the engine when it begins to wear out. This can potentially be a symptom of low oil pressure.
Does the timing belt really need to be replaced?
At the recommended mileage intervals for your vehicle, it’s critical to change your timing belt. Although every manufacturer is unique, it should normally be changed every 60,000–100,000 miles. The owner’s manual for your car will list the suggested interval for your particular vehicle.
Since the timing belt is constructed of rubber, it will ultimately wear out and break. The engine will cease working or the parts will be out of sync, which will harm the engine, when it fails.
If you don’t change the timing belt when it needs to be, you risk having an entirely failed engine, broken or bent valves, damaged cylinder heads or camshafts, damaged pistons, and damaged cylinder walls. It is not safe to apply the maxim “If it ain’t broke, don’t fix it” in this instance. To prevent spending thousands of dollars on engine repair or replacement, replace the timing belt in accordance with the manufacturer’s recommended maintenance schedule.
Signs That It’s Time to Replace the Timing Belt
Often, a timing belt will break without any prior notice. However, the following are some potential signs that it could be time to replace your belt:
- Vehicle starting issues
- belts making rubbing or squealing noises
- engine is making a ticking noise.
- Engine Check Light
- oil leaking
- trembling or vibrating
- lower engine power
- Overheating
We advise replacing the water pump at the same time as servicing your car. When the timing belt is removed, it is simple to reach the water pump, which typically has a comparable lifespan. You reduce your labor expenses in this way.
Can I change the timing belt on my own?
It does need some engine knowledge to replace a timing belt and water pump, so if you don’t have much expertise working under the hood, we advise leaving it to the experts. However, if you prefer making your own repairs and restorations, you can do it yourself and avoid paying hefty repair expenses in the process.
Starting with the tools you’ll need, we’ll walk you through the replacement of a timing belt and water pump step by step.
What You’ll Need to Replace the Water Pump and Timing Belt
- jar or bucket (for collecting coolant)
- new antifreeze/coolant
- Wrench socket set
- a fresh timing belt
- bags made of plastic and a permanent marker (for labelling nuts, bolts and parts you remove from the engine)
- Set of Allen keys
- tools for driving screws, such as Philips and slot drive
- leather gloves
- Tip-Ex, white chalk, and white paint (for marking the cogs for simpler reassembly)
- a fresh water pump
Step 1: Preparation
Get your car and work area ready first. Depending on your degree of experience, changing a timing belt and water pump can take anywhere from one to three hours, so make sure you have the time and space necessary. Before you begin, carry out the following:
- Before starting, make sure the engine is entirely cool.
- Since coolant will spill out when you remove the water pump, place a bucket underneath it. To find the pump, see your car’s manual.
- To reach the undercarriage beneath the engine, jack up the front of the automobile.
- To stop the engine from spinning while you’re removing the timing belt, put the engine in drive and use the handbrake.
- Prepare all of your tools, and have bags and a pen on available to name and store the engine parts you remove.
Step 2: Removing the Belts
You must first remove the fan belt and power steering belt because they are located next to the cover that protects the timing belt and water pump. To remove the belts, take the following actions:
- Crankshaft pulley: Loosen. To access the engine and remove the bolt, you’ll need a long wrench arm.
- To access the timing case and crankshaft pulley, do the same with the power steering belt by moving it aside.
- The fasteners holding the alternator in place should be loosened. The fan belt can then be removed by lightly tapping it.
What occurs if a timing belt on a Honda Pilot breaks?
If the timing belt malfunctions, the check engine light will illuminate and the engine will run poorly. If the belt snaps, the engine can stall.
Will my engine be destroyed if my timing belt breaks?
First of all, how could you possibly predict when your timing belt will fail? Your car cannot function at all without a timing belt, which is really fairly basic. The automobile will quickly break down if the belt breaks while you’re driving, and your engine could sustain extremely catastrophic damage. In order to take action before it is too late, you need to be on the lookout for warning signs and symptoms of a weakening timing belt. These include your engine making loud clicking or screaming noises, misfiring, and not starting at all.
Do I need to change the timing belt and water pump?
Many modern engines now use timing belts instead of timing chains. The appropriate sequential operation of the crankshaft, pistons, and valves is guaranteed by both belts and chains. Compared to chains, belts are more efficient, lighter, and quieter.
Unless your vehicle has a time chain, which doesn’t often need repair, both parts are essential to the vehicle’s correct operation and should be replaced on a regular basis. See how these parts function below, along with information on the internal parts of the timing belt and water pump system that are related to them.
For information on when to replace your water pump and timing belt, consult your owner’s manual, or stop by and speak one-on-one with one of our service specialists. In general, whenever the timing belt is changed, the idler pulleys, tensioner, and water pump should also be replaced. Since the water pump is often driven by the timing belt, now is the ideal time to replace it. In addition, the manufacturer advises it.
A WORD FOR THE SMART. When requesting a “over-the-phone estimate for replacing a timing belt and/or water pump,” use caution. Less reputable businesses will offer you what appears to be a wonderful price to entice you in and not disclose the “full picture” (see above). The vast majority of the time, it is cost-effective and complete maintenance to replace the timing belt, water pump, tensioner, and idler pulley (where equipped) all at once. This is because, if one element needs replacement, the others are typically not far behind. For details, consult your owner’s handbook.
Caveat Emptor (Buyer Beware)
Let’s get to it: The less honest repair shop provides you a lowball estimate to replace the timing belt or the water pump with little to no labor and little to no cost for parts. When they get you in and your car is disabled on the hoist, they dial your number and ask, “Guess what you need? You guessed it—you need the complete timing belt and water pump package, which also includes the new idler pulley and new timing belt tensioner that your quote ought to have originally included! Hello!
Because you frequently need to remove the water pump in order to access the timing belt, the labor cost difference to perform both units at the same time is practically nonexistent in most vehicles! When compared to having to pay all that labor AND the expense of a water pump in the not-too-distant future when the water pump blows up, the cost of most water pumps is small.
In our humble opinion, it is misleading not to provide you with an accurate estimate of the total cost to replace the water pump, the timing belt, and any other small ancillary parts at the same time.