The timing belt and water pump on your Honda should typically be inspected and/or replaced every seven years or 60,000–100,000 miles, according to the Honda maintenance plan.
In This Article...
Honda timing belts’ actual lifespan is how long?
To replace your timing belt, however, you should generally wait somewhere between 60,000 and 100,000 miles.
How can I know if I need to replace my timing belt?
Indicators That Your Timing Belt Must Be Replaced
- Under the hood, there is a ticking sound when the engine is operating.
- The engine won’t turn on.
- While driving, the engine was misfiring.
- Under the hood, on the front side where the motor is, there is oil dripping.
- driving when hydroplaning in a slick environment.
- There is a check engine light on.
Honda stopped using timing belts when?
All Civic cars from 2006 and later lack a belt. They already have a timing chain, so it won’t need to be changed. Therefore, if you’re looking for a timing belt for a 2019 Honda Civic, for instance, you’ll discover that it actually has a timing chain.
How much does a new Honda timing belt cost?
One of your Honda’s engine’s most important parts is the timing belt. Unfortunately, a lot of drivers fail to notice it. The expense of replacing the timing belt can be high; it normally ranges from $500 to $1,000.
A timing belt’s lifespan is 200 000 miles.
That concludes our examination of the timing belt’s nature, operation, and significance. Can a timing belt travel more than 200 000 miles? Not at all. And to be honest, unless you have a junker that you don’t mind giving up, you really shouldn’t try this out in person. Expect severe engine damage if you continue to drive your automobile with a timing belt that is worn out, installed incorrectly, or otherwise flawed.
The cost of replacing your timing belt is by no means a cheap one. You’ll have to pay several hundred dollars, or in some cases nearly or more than a thousand. But this is little compared to the $2,000, $3,000, or even higher needed to rebuild a broken timing belt-related engine that has failed. Who would have thought that this tiny piece of rubber could fail and give you such heartache?
How long does a timing belt last?
According to various schedules, including data provided by the manufacturers, a timing belt typically has to be replaced after 7 to 10 years, or between 60,000 and 105,000 miles, whichever comes first.
Will my engine be destroyed if my timing belt breaks?
First of all, how could you possibly predict when your timing belt will fail? Your car cannot function at all without a timing belt, which is really fairly basic. The automobile will quickly break down if the belt breaks while you’re driving, and your engine could sustain extremely catastrophic damage. In order to take action before it is too late, you need to be on the lookout for warning signs and symptoms of a weakening timing belt. These include your engine making loud clicking or screaming noises, misfiring, and not starting at all.
Can you replace a timing belt on your own?
It does need some engine knowledge to replace a timing belt and water pump, so if you don’t have much expertise working under the hood, we advise leaving it to the experts. However, if you prefer making your own repairs and restorations, you can do it yourself and avoid paying hefty repair expenses in the process.
Starting with the tools you’ll need, we’ll walk you through the replacement of a timing belt and water pump step by step.
What You’ll Need to Replace the Water Pump and Timing Belt
- bags made of plastic and a permanent marker (for labelling nuts, bolts and parts you remove from the engine)
- leather gloves
- Wrench socket set
- Tip-Ex, white chalk, and white paint (for marking the cogs for simpler reassembly)
- jar or bucket (for collecting coolant)
- tools for driving screws, such as Philips and slot drive
- a fresh timing belt
- new antifreeze/coolant
- Set of Allen keys
- a fresh water pump
Step 1: Preparation
Get your car and work area ready first. Depending on your degree of experience, changing a timing belt and water pump can take anywhere from one to three hours, so make sure you have the time and space necessary. Before you begin, carry out the following:
- Before starting, make sure the engine is entirely cool.
- Prepare all of your tools, and have bags and a pen on available to name and store the engine parts you remove.
- To stop the engine from spinning while you’re removing the timing belt, put the engine in drive and use the handbrake.
- Since coolant will spill out when you remove the water pump, place a bucket underneath it. To find the pump, see your car’s manual.
- To reach the undercarriage beneath the engine, jack up the front of the automobile.
Step 2: Removing the Belts
You must first remove the fan belt and power steering belt because they are located next to the cover that protects the timing belt and water pump. To remove the belts, take the following actions:
- Crankshaft pulley: Loosen. To access the engine and remove the bolt, you’ll need a long wrench arm.
- To access the timing case and crankshaft pulley, do the same with the power steering belt by moving it aside.
- The fasteners holding the alternator in place should be loosened. The fan belt can then be removed by lightly tapping it.
Which Honda engines are equipped with timing belts?
By looking at the model year and trim level of your Honda Accord, you can typically determine if it has a timing belt or a timing chain. There are typically two different engines available in the Honda Accord model years, each with its own corresponding engine system. Fortunately, there is a helpful guide. Your Honda Accord features a timing belt if it was manufactured between 1997 and 2002. Your engine has a timing belt if you have a 4-cylinder model from 2003–2007; if you have a V6 model from those years, it has a timing chain. A 4-cylinder Accord from 2008 to 2012 will use a timing chain, while vehicles with V6 engines have a timing belt. The V6 vehicles have a timing belt from 2013 to 2017, but the 4-cylinder variants continue to use a timing chain. All of the available engines come with a timing chain as of the 2018 model year.
Which is superior, timing chains or belts?
Timing belts typically last less time than timing chains. Timing belts are made of rubber, which isn’t as strong as metal, but chains are made of metal, and this is the simple explanation for why this is the case. Timing belts are not weak, but they will probably need to be replaced at some point, whereas a chain can last the lifetime of the car.
Timing belts typically need to be replaced in the mileage range of 55,000 miles (about 90,000 km) and 90,000 miles (roughly 150,000 km). Therefore, a timing belt is still a very reliable and significant component of your car.
Whether your car has a timing chain or belt, it’s critical that you watch for any symptoms of wear and strain and take appropriate action. Depending on the sort of engine you have, a broken timing belt can have disastrous results. You could be better off searching to get a new vehicle if the repairs are too expensive to be practical.
How frequently do timing belts fail?
You understand the significance of routine scheduled maintenance for your car as a car owner. The inner workings of your car must therefore be understood, as must the frequency of replacement for each component, such as the timing belt in your car.
What is a timing belt?
You may want to start by wondering what a timing belt is and what it does. The timing belt in your car regulates the crankshaft and camshaft rotation of the engine as well as the opening and closing of the engine valves that let gasoline and air in and out. In essence, the timing belt synchronizes the engine’s operations, igniting the fuel in the combustion chamber.
When to replace your vehicle’s timing belt
It’s critical to get the timing belt updated on a regular basis because it performs such a crucial function. Most of the time, there are no warning signs that a timing belt is being worn. It frequently just breaks. Because of this, the majority of manufacturers advise replacing your vehicle’s timing belt every 60,000 to 100,000 miles. To find out what is advised for your particular model, consult your owner’s manual.
Instead of waiting until your automobile breaks, it is more cost-effective and secure to replace the timing belt. In fact, replacing your timing belt after it breaks can cost more than twice as much. It goes without saying that it’s preferable to prevent problems with your vehicle.
What results in a timing belt breaking?
An engine may make a ticking or clicking noise when the timing belt is worn out. Low oil pressure may be the cause of this noise, which may harm the timing belt. The engine oil applies pressure to the tensioner to keep the belt taut. The belt will become loose, maybe disengage from the pulleys, and/or break if the tensioner has no oil pressure. The timing belt will break if the camshafts are unable to operate effectively due to a lack of oil pressure.
Timing belts are they covered by Honda warranty?
Every new Honda vehicle comes with a 3-year, 36,000-mile Limited Vehicle Warranty and a 5-year, 60,000-mile Limited Powertrain Warranty as standard equipment. A typical new car warranty should cover timing belts and other regular engine components.
Honda has a Limited Warranty on Replacement Parts that is valid for a year even if you have to pay for them out of pocket. For replacement parts bought from and installed by a Honda dealer, labor and component replacement are covered by the guarantee. The worldwide warranty for each Honda Genuine Remanufactured Part is three years or 36,000 miles.
Why is a timing belt replacement so pricey?
The timing belt is not a pricey component by itself. It is so expensive because of the time and labor involved. The engine must be disassembled in order to access the timing belt. It takes a lot of time and effort to do it.
If I don’t replace my timing belt, what happens?
At the recommended mileage intervals for your vehicle, it’s critical to change your timing belt. Although every manufacturer is unique, it should normally be changed every 60,000–100,000 miles. The owner’s manual for your car will list the suggested interval for your particular vehicle.
Since the timing belt is constructed of rubber, it will ultimately wear out and break. The engine will cease working or the parts will be out of sync, which will harm the engine, when it fails.
If you don’t change the timing belt when it needs to be, you risk having an entirely failed engine, broken or bent valves, damaged cylinder heads or camshafts, damaged pistons, and damaged cylinder walls. It is not safe to apply the maxim “If it ain’t broke, don’t fix it” in this instance. To prevent spending thousands of dollars on engine repair or replacement, replace the timing belt in accordance with the manufacturer’s recommended maintenance schedule.