The Hyundai Elantra’s starter is situated beneath the engine. When you switch on the ignition, this tiny yet mighty motor starts the engine. Your Elantra wouldn’t start without it. The motor’s internal brushes deteriorate and quit functioning over time. When this occurs, the engine won’t start when you turn the key. The broken starter must be changed out for a new one in order to solve the problem and get your Elantra back on the road.
In This Article...
How much does a 2013 Hyundai Elantra starter cost?
For your 2013 Hyundai Elantra, we now offer 10 starter packages, with prices ranging from $154.99 to $406.99 in our inventory.
A Hyundai Elantra starter costs how much?
Estimated cost to replace the starter on a Hyundai Elantra. Replacement starters for Hyundai Elantras typically cost between $427 and $498. While parts are priced between $346 and $396, labor costs are expected to be between $80 and $102
How much does a Hyundai starter cost?
Hyundai Sonata starter replacement typically costs between $397 and $517. Between $86 and $109 is the expected cost of labor, while between $311 and $409 is the estimated cost of parts. Taxes and levies are not included in this range, nor are your particular model year or special location taken into account.
Do Hyundai Elantras have a recall?
The seat belt pretensioners could detonate in a collision and shoot metal shards in the direction of the car’s occupants.
shares of the news story
The seat belt pretensioners on 239,000 Hyundai vehicles, including the 2019 to 2022 Accent, 2021 to 2023 Elantra, and 2021 to 2022 Elantra Hybrid, could blow up and injure occupants in the event of a collision.
A seat belt pretensioner is a crucial piece of safety equipment that tightens the belt at the first sign of a collision to reduce the risk of injury. The seat belt pretensioners on these recalled vehicles, however, run the risk of blowing up in a way that throws metal shavings in the direction of the occupants. The carmaker is still looking into what caused this issue in the first place.
To rectify the problem, Hyundai stores will install a protective cap on the problematic pretensioners, free of charge.
Hyundai had recalled a few Hyundai and Genesis vehicles for the same problem in 2021 and early in 2022. These cars will require yet another recall repair.
The automaker claims in records sent to the National Highway Traffic Safety Administration that it is aware of three injuries connected to the recall, of which two occurred in the United States.
What is the location of your starter?
The starter is situated beneath the left mound of cylinders on the driver’s side of a car, between the transmission and the engine. It is kept in place by a few bolts and fastened to the mounting plates. Two cables are also connected to it.
Your car’s engine needs a starter to start and run smoothly. It is a relatively tiny device that is powered by the car’s battery. The car won’t start if a starter is defective.
A starter motor is a dependable component, so replacing one is not something you do frequently. Unlike other components, it might only need to be replaced once during the course of the vehicle’s lifetime.
When the starter fails, how do you start a car?
The starter solenoid connects the starter to the transmission in your car. If you hear the starting turning freely when you turn the ignition on, there might be a solenoid issue.
Check for dirt or rust on the solenoid wire to diagnose a faulty starter solenoid. You can work around the damaged starter solenoid wire if rusting is the problem.
To do this, connect the starter and solenoid using a 12V cable that runs straight from the car’s battery. When the connection is made, you’ll hear a click sound. Now switch on your ignition.
As soon as the engine cranks, you should unplug the 12V wire. If not, the flywheel, which is moving at a much faster speed, will continue to rotate with the starter gear (pinion) engaged, which could cause damage.
Could it be my starter or battery?
Dead Car Battery Warning Signs Does the car make a clicking noise when you try to start it, but it won’t turn over? That might be encouraging. A dead battery is most likely to blame if a jump starts the car, but it won’t start again after being turned off.
How can I tell if I need to change my starter?
- noisy clicking Often, when the key is turned, a loud click or succession of clicks will occur as the first indication of starter difficulty.
- sounds of grinding.
- Buzzing.
- engine turning on and off.
- Additional problems that may prevent no starts
Can I change the starter on my own?
The majority of people believe that if their automobile won’t start, the battery is to blame. They attempt to boost it, but it still won’t turn on. Obviously, it’s a beginner or something little more severe. The alternator receives a charge from the battery of the car through the starter. The alternator’s charge makes it possible for the car to start. The car is dead if the starter is worn out since it won’t accept or send a charge. A repaired starter is just as effective as a new one and is less expensive than buying a new one, which is pretty pricey [source: Allen]. Save money by replacing the starter yourself if it is the true source of the issue. How to change an automobile starter is as follows:
- In order to disconnect the negative battery cable from the battery, turn off the ignition.
- From the starter, unplug the positive cable—the substantial cable that connects to the battery.
- Using a ratchet, unplug each of the bolts holding the starter to the block.
- Any additional mounting brackets keeping the starter in place should be removed.
- The starter’s bolts must all be removed. Bolts that are difficult to remove or extremely tight should not be forced. Instead, use oil or lubricant to aid in removing the bolt.
- Take the starter out of the vehicle.
- The new starter should be mounted on the block and fastened with bolts. Reconnect the battery cable to the starter before tightening the bolts.
I don’t want to remove my starter, but how can I test it?
The engine must be spun or cranked by the starter. If it does, the wires, connectors, or relay are the cause of the issue. If not, start the engine and use the black/negative jumper cable to establish a connection between the drivetrain and the battery’s negative terminal as a ground. Connect the red cable to the positive starter terminal.
Will a starter simply stop functioning?
Over time, starters do degrade or stop working. However, if you bring your car into an auto repair shop, the experts might ask you about the warning signals that it’s on its last legs. Your responses will aid them in determining the issue.
How long does a starting replacement take?
They just informed me that my starter needs to be replaced while I’m in the repair shop for some routine maintenance. How long does it take to replace a starter, please?
In less than two minutes, find out if your auto insurance is being overcharged.
Depending on where the starter is located in your engine, replacing one will take anywhere from two to four hours.
Some engines have starters that are easier to access than others. To get that starter, a mechanic might need to scrounge around and remove certain components. If that’s the case, a 4 hour time frame would likely be preferable to a 2 hour one.
Download the Jerry app to see if you’re overpaying for auto insurance while you’re waiting for the mechanic to complete. We warrant that replacing your starter will be much quicker!
Simply spend a minute to respond to a few questions, and Jerry will do the rest of the work for you. To find you the greatest offer, they all produce competitive estimates from leading insurance companies. When a customer shops with Jerry, they often save over $800!
What makes tapping a starter effective?
This works because as the brushes deteriorate, an insufficient electrical contact results. The brushes are knocked back into position so they may make contact once more by lightly pounding the starter’s back with a hammer.
How much does it typically cost to replace a starter in labor?
An entirely new starter might cost you $50 to $350, and work from a skilled mechanic could cost you $150 to $1,100. A poor starting motor replacement could cost anything from $200 to $1450.
These numbers, however, can be lower if you can spot problems with the car starting at an early stage. By purchasing a rebuilt starter rather than a new one, you could also save a lot of money.
Unless you can get a hold of a mobile mechanic who can come over instead, you might also have to pay to have your car towed if the starter on it breaks unexpectedly.
Let’s look at the variables that affect these pricing estimations now that you have a general idea of the average starter replacement cost.
when all the lights are on but your car won’t start?
If your headlights work but your car won’t start, your battery is charged but the starter or ignition isn’t working properly. A starting engine can be jumped using a charged battery if the starter or ignition is the issue.
Why won’t my automobile start and make a clicking noise?
When you turn the key in the ignition, does your car make a succession of quick clicks similar to this?
The good news is that this issue might be easily resolved. A loud, quick clicking sound is typically a sign that your starter motor isn’t receiving enough electrical current to engage; in other words, your solenoid is trying to connect but failing. A deteriorating battery, a faulty connection at the battery, or even a defective alternator that isn’t adequately charging your battery could all be to blame for this lack of electrical current. In the best case situation, you should clean your battery or posts.