It is typically found directly behind the crankshaft pulley/harmonic balancer on the Santa Fe (the pully lowest in the engine compartment driven by the drive belt).
In This Article...
SERPRESULT
You may shop online for the best Starter for your 2005 Hyundai Santa Fe and pick it up for free at your nearby O’Reilly Auto Parts.
99 8 Tooths, a Clockwise Rotating Starter, and 12 Volts
How long does a Hyundai Santa Fe starter last?
How Frequently Should Starters Be Replaced? The typical lifespan of a car starter motor is between 100,000 and 150,000 miles.
A Hyundai Sonata starter costs how much?
Hyundai Sonata starter replacement typically costs between $397 and $517. The cost of labor is expected to be between $86 and $109, while the cost of parts is between $311 and $409.
What room is the starter in?
If your vehicle has rear-wheel drive, the starter is often located on the passenger side of the engine, directly below the exhaust manifold. If it is a front-wheel-drive vehicle, look above the transmission on the driver’s side or under the exhaust manifold. On some automobiles, they may also be found just beneath the intake manifold. If you open the hood to discover that your starter is covered in engine oil, a malfunctioning starter may really be a sign of an oil leak. Keep an eye out for oil leaks to prevent starter problems of this sort because, regrettably, what begins as a few droplets of oil can steadily and often unnoticeably evolve into a costly problem.
Is my automobile in need of a starter, and how can I tell?
- noisy clicking Often, when the key is turned, a loud click or succession of clicks will occur as the first indication of starter difficulty.
- sounds of grinding.
- Buzzing.
- engine turning on and off.
- Additional problems that may prevent no starts
If my car’s starter is broken, how can I start it?
Your automobile may frequently not start because of a weak or drained battery. Giving the starter enough amps will enable it to operate normally, which will cause the engine to start.
You can either use a portable jump starter or the battery and jumper wires from another automobile to jump-start a vehicle.
What you should do next is as follows:
- Locate the automobile battery by lifting the hood of your vehicle. Consult the car’s handbook if you can’t find it. Don’t work on your automobile battery if it appears bloated or is dripping. Instead, give a mechanic a call because the battery could need to be changed.
- If the car battery appears to be in good condition, connect the positive terminal of your weak battery to the positive terminal of the backup battery or jump starter using the positive wire (red jumper cable).
- Connect the negative terminal of the charged battery to any exposed metal on the vehicle using the black jumper cable.
- Now start the engine and wait for the battery to charge for a few minutes.
Depending on the engine type, DOD, and battery condition, a dead battery may take between 5 and 20 minutes to start up.
Detach the jumper cables once you’ve successfully started your automobile with a jump. The (-ve) clamp comes first, followed by the (+ve). Ensure that none of these cables touch one another as well.
Note: A broken starter may be to blame if your battery is charged but your car still won’t start. The starter relay can thus be disregarded.
Can I change the starter on my own?
The majority of people believe that if their automobile won’t start, the battery is to blame. They attempt to boost it, but it still won’t turn on. Obviously, it’s a beginner or something little more severe. The alternator receives a charge from the battery of the car through the starter. The alternator’s charge makes it possible for the car to start. The car is dead if the starter is worn out since it won’t accept or send a charge. A repaired starter is just as effective as a new one and is less expensive than buying a new one, which is pretty pricey [source: Allen]. Save money by replacing the starter yourself if it is the true source of the issue. How to change an automobile starter is as follows:
- In order to disconnect the negative battery cable from the battery, turn off the ignition.
- From the starter, unplug the positive cable—the substantial cable that connects to the battery.
- Using a ratchet, unplug each of the bolts holding the starter to the block.
- Any additional mounting brackets keeping the starter in place should be removed.
- The starter’s bolts must all be removed. Bolts that are difficult to remove or extremely tight should not be forced. Instead, use oil or lubricant to aid in removing the bolt.
- Take the starter out of the vehicle.
- The new starter should be mounted on the block and fastened with bolts. Reconnect the battery cable to the starter before tightening the bolts.
Is it simple to change a starter?
The average time to replace an automobile starter is two hours. If you have all the required equipment and components on hand before starting the project, you can cut down on this time.
The task can take closer to three hours if you have to order parts or borrow tools. Having saying that, some cars are simpler to repair than others. For instance, it might be quicker to replace the starter on a Honda than a Ford.
How can I tell if my starter is defective?
- #1: The Engine Won’t Start.
- #2: Loud, grinding, or whirring noise.
- #3: Occasional Trouble Starting the Car.
- #4: The Starter Continues After the Start.
- #5: Smoke.
- #6: The starter engages but the engine won’t turn over.
- Seven: Battery
I don’t want to remove my starter, but how can I test it?
The engine must be spun or cranked by the starter. If it does, the wires, connectors, or relay are the cause of the issue. If not, start the engine and use the black/negative jumper cable to establish a connection between the drivetrain and the battery’s negative terminal as a ground. Connect the red cable to the positive starter terminal.
A damaged starter will it still start?
The engine may crank slowly if the starter motor has an internal issue. However, other problems, such a weak battery or an internal engine fault, may also be to blame for the issue.
How can you determine if your battery or starter is bad?
Lastly, examine the starter. In order to turn the engine over and start the car, the battery provides a burst of energy to the starter. When you turn the key in the ignition and all you hear is a click, your starter is malfunctioning.
How can I reset the immobilizer on my Hyundai?
The keys to Hyundai vehicles have a microchip that occasionally loses synchronization (the key warning light will blink).
If you have one, a spare key.
2. If that doesn’t work, try unplugging the battery’s ground lead for five minutes. This should reset the immobilizer module.
3. To disable the immobilizer, you can enter the limp home password on the metal tag that comes with the keys by using the ignition key. See manual illustration.
Has Hyundai installed an immobilizer?
Electronic immobilizers that stop criminals from just breaking in and bypassing the ignition are absent from a large number of 2015–19 Hyundai and Kia automobiles. The component comes as standard on almost all automobiles from that era built by other manufacturers.
How long does a mechanic need to change a starter?
They just informed me that my starter needs to be replaced while I’m in the repair shop for some routine maintenance. How long does it take to replace a starter, please?
In less than two minutes, find out if your auto insurance is being overcharged.
Depending on where the starter is located in your engine, replacing one will take anywhere from two to four hours.
Some engines have starters that are easier to access than others. To get that starter, a mechanic might need to scrounge around and remove certain components. If that’s the case, a 4 hour time frame would likely be preferable to a 2 hour one.
Download the Jerry app to see if you’re overpaying for auto insurance while you’re waiting for the mechanic to complete. We warrant that replacing your starter will be much quicker!
Simply spend a minute to respond to a few questions, and Jerry will do the rest of the work for you. To find you the greatest offer, they all produce competitive estimates from leading insurance companies. When a customer shops with Jerry, they often save over $800!
My automobile won’t start, it simply clicks quickly.
When you turn the key in the ignition, does your car make a succession of quick clicks similar to this?
The good news is that this issue might be easily resolved. A loud, quick clicking sound is typically a sign that your starter motor isn’t receiving enough electrical current to engage; in other words, your solenoid is trying to connect but failing. A deteriorating battery, a faulty connection at the battery, or even a defective alternator that isn’t adequately charging your battery could all be to blame for this lack of electrical current. In the best case situation, you should clean your battery or posts.