SAE 5W-20 is preferable above 5W-20 and 5W-30. Capacity: 4.8 quarts with filter. Check the oil level after refueling.
In This Article...
Engine Oil Type for a Hyundai Sonata Nf
You must understand SAE Viscosity Grade and API Quality Index oil for diesel or gasoline engines in order to choose the proper oil. Any Brand listed is available for selection.
Using the 2005 Hyundai Sonata (Nf) as an example, suitable multigrade semisynthetic oil is 10W-30 quality SN.
Semisynthetics 0W-30 SN are ideal for 2010-built bodies over the winter.
If at all feasible, verify that the chosen oil complies with the service intervals and manufacturer’s recommendations.
How much oil does a Hyundai Sonata require?
Oil specification for the 2017 Hyundai Sonata is 5W-20. Fully synthetic oil, which should be changed every 7,500 to 10,000 miles and is generally better for your engine, is what we advise choosing. Although conventional oil is good and less expensive, you still need to change it more frequently.
The type of oil your vehicle requires should be indicated in the owner’s manual or on the engine’s oil cap. You now know where to quickly check!
Speaking of keeping up with your car’s upkeep, remember to do the same with your insurance. Fortunately, when you shop for an insurance with Jerry, we take care of all the labor for you, including finding you individual quotes from more than 55 providers and handling the paperwork and phone calls necessary to set up your new policy. Heck, if you decide to switch, we’ll even assist you terminate your current policy!
Uses Hyundai 100% synthetic motor oil?
Full synthetic motor oil is pre-filled in all Hyundai vehicles before they leave the manufacturer and arrive at our showroom. As a result, it is advised to keep using synthetic oil to give your car’s engine the best possible protection. Our dealership has switched to Quaker State Full Synthetic solely to give you the most value and protection for your car, keeping it in top running condition.
The advantages of Quaker State Full Synthetic Oil include:
- Engine Cleaner & Less Wear
- Engine Durability
- increases fuel efficiency
- Start-up and Extreme Temperature Ranges
Does Hyundai advise using synthetic motor oil?
While conventional oil only lasts between 3,000 and 5,000 miles before it needs to be replenished, synthetic oil can last up to 10,000 miles before it needs to be changed. We absolutely recommend synthetic oil for the Hyundai Elantra because it offers drivers many more advantages than conventional oil does.
Can I replace the 5w20 in my Hyundai Sonata with 5w30?
It is generally not advised to substitute 5w30 oil (or any other oil weight) for 5w20 oil because even a small viscosity change has the potential to harm your engine.
Because 5w20 oil was precisely considered when your engine was created, all of the parts that come into contact with it must be a specific viscosity after the engine reaches operating temperature, or 212a.
5w20 oil will have a lower viscosity than 5w30 oil at this temperature; it will flow considerably more easily and with less resistance. When 5w30 is used in place of 5w20, the engine will experience increased oil resistance once it reaches working temperature, which the engine is not built to manage.
If you use 5w30 oil instead of 5w20 when it is not advised or permitted by your owner’s manual, it could violate the powertrain warranty on your car, impair engine performance, and ultimately harm your engine.
Making sure your engine is protected with the appropriate insurance policy utilizing Jerry will help keep it running at its best. As the leading broker and comparison app for auto insurance in the country, Jerry makes it simple to locate and compare affordable quotes, helping users save $887 annually on their auto insurance.
5W 30 oil is it synthetic?
The #1 High Mileage brand, Castrol(r) GTX(r) High MileageTM 5W-30, is a premium synthetic blend motor oil designed especially for vehicles with over 75,000 miles on them.
What is oil 5W 20?
5W20 Definition The SAE class under which the engine oils were designated is known as 5W20. These multigrade oils have excellent flow characteristics even at subfreezing temperatures. The designation 5W denotes that the oil can withstand winter temperatures of up to -35 °C.
5W 20 oil is it synthetic?
With Mobil 1 5W-20 advanced full synthetic motor oil, your engine will run like new and be protected for up to 10,000 miles between oil changes while still receiving superior engine protection.
Nothing works better overall than Mobil 1, a motor oil that is a part of many various car models, including a few high-performance ones.
In order to meet or surpass the industry’s strictest standards, Mobil 1 5W-20 motor oil is created with a proprietary blend of high-performance synthetic base stocks strengthened with a carefully calibrated additive component system.
ExxonMobil advises using Mobil 1 5W-20 motor oil in all sorts of contemporary gasoline-powered vehicles, including those with high-performance, turbocharged, supercharged, multi-valve, or fuel-injected engines.
- Cars
- Trucks
- SUVs
- Vans
Compared to our conventional and synthetic blend oils, Mobil 1 5W-20 motor oil performs better. Additionally, the sophisticated full synthetic formula can:
Please review our limited Mobil 1 warranty. The manufacturer’s suggested oil viscosity grade, API service classification, and any builder approval are all listed in your owner’s handbook. For a fast glance at significant manufacturer approvals and details on the zinc and phosphorus contents in Mobil 1 5W-20, you can also consult the Mobil 1TM Product Guide.
Follow the oil life sensor or the suggested oil change schedule in your owner’s manual if your car is still under warranty. To guarantee efficient operation, proper maintenance procedures are necessary, including routinely monitoring the oil level to make sure the right amount of oil is present.
*Protection lasts for a year or 10,000 miles, whichever comes first. Read our Mobil 1 limited warranty for more details.
Can you combine synthetic and conventional oils?
So, is it possible to combine synthetic and conventional oil? Yes. Mixing shouldn’t harm your engine if it’s something you do infrequently. Consider topping off your oil so you can keep driving until your next regularly scheduled maintenance appointment.
Synthetic oil: Is it better?
Yes, synthetic oil is superior to regular oil for engines. While conventional oil, or mineral oil, can provide enough lubrication, it cannot match the overall engine protection and performance offered by synthetic oils.
When opposed to the less refined base oils used in conventional oils, synthetics use higher grade base oils, making conventional oils:
- Less stable chemically
- easier to oxidize and acidify
- faster to degrade and lose protective properties
In general, full synthetic motor oils outperform traditional and synthetic blend motor oils in terms of engine protection and performance. The sophisticated complete synthetic motor oils from Mobil 1TM are precisely developed with an additive system that offers performance advantages over conventional and synthetic blend oils by:
- preventing sludge and deposit accumulation
- minimizing wear
- safeguarding against extreme temperatures
- preventing oil deterioration
Therefore, all of the chemistry that is developed in a lab has a significant impact on the road.
Full synthetic motor oil: What does that mean?
Synthetic oil is a lubricant made of synthetic chemical compounds, which are created by disassembling and then reassembling petroleum molecules. Millions of molecules of synthetic oil may be seen under a microscope, all with a remarkably uniform size and structure. On the other hand, refined crude oil is used to create mineral or conventional oil. Millions of molecules in all sizes, shapes, and configurations can be seen in a drop of standard oil when examined under a microscope. Synthetic oil can be produced from a variety of base types and can be entirely synthetic or a blend of synthetics.
Full synthetic oils are created molecule by molecule without the use of petroleum, start with a synthetic base stock, and contain additives to hasten the breakdown of the oil. A synthetic blend is a combination of synthetic base stocks and conventional motor oil. You get a little bit more protection when using the synthetic base stock in combination with the conventional mineral oil than when using the conventional oil alone.
There are numerous varieties of synthetics, each with notably own qualities and uses. However, polyalphaolefins are the most common synthetics used in automobile servicing (PAO). For the sake of simplicity, PAOs will be the main type of synthetic oil mentioned in this article.
How frequently should synthetic oil be changed?
Synthetic oil is more refined than ordinary auto oil, which can cut friction, lessen engine sludge, and improve engine performance. Depending on the vehicle and the brand of synthetic oil used, it is advised that you change the oil every 7,500 to 15,000 miles.
What is the shelf life of synthetic oil?
Synthetic oil has evolved since it was first developed in 1929, going from powering warplanes to everyday cars. In the last three years, the shift to synthetics has been most noticeable, with more than two-thirds of new cars requiring full or blended synthetic oil. Finding out how long synthetic oil lasts has become more crucial as a result of this influx.
How long does synthetic oil remain effective? The typical lifespan of synthetic oil is 6 to 12 months, or 7,500 to 10,000 miles, before it needs to be replaced. This is merely a rough estimate, and it could vary depending on the type of oil you use, how old your car is, and the road conditions.
How does SAE relate to oil?
In order to reduce friction, lubricants are utilized to coat engine parts with a protective layer. This lessens wear and increases the useful life of the car.
The importance of oil viscosity and how it is impacted by temperature The Society of Automotive Engineers’ acronym, SAE, is the first three letters you need to know. This society is tasked with creating a classification scheme that is exclusively based on oil viscosity. The viscosity of the oils is assessed in hot settings at 100oC and subsequently in cold conditions at various temperatures below zero in order to identify them. The oils are separated into monograde and multigrade categories using this basis measurement.
What makes using monograde oils unique? When the seasons are at their most intense, it’s best to change your oil (winter and summer). Since the heat makes thick oil more liquid in the summer, you need more of it. In contrast, a less viscous oil is required in the winter to facilitate cold starts.
Therefore, you’ll see the letter W (from Winter) and a number showing the oil’s viscosity at low temperatures following the SAE on the bottles of this type of oil. Low SAE W numbers will result in greater oil flow, which will facilitate cold starts and lessen engine wear.
If, however, you see figures between 20 and 60 in place of a W, that indicates the oil’s viscosity at higher temperatures. The higher the number, the greater the viscosity, which results in a denser lubricating film and, in theory, more protection for mechanical components that are moving and coming into touch with one another.
High viscosity at high temperatures, however, does not equate to greater lubrication for the car because it increases internal friction and reduces engine performance.
These oils can be utilized in a wide range of high and low temperatures and meet two SAE grades. Consequently, two digits are separated by a hyphen on this lubricant. A W, denoting the oil’s viscosity in cold conditions, will appear after one letter. Since these oils are not as temperature-sensitive as monograde oils, they don’t need to be changed according to the seasons but rather whenever it’s time for an oil change. The oil’s viscosity at low temperatures is indicated by the number before the W, and at higher temperatures by the other number.
As a general rule, it’s crucial to adhere to the manufacturer’s recommendations, which specify the ideal oil viscosity grade for lubricating the engine. The decision is based on the engine configuration, the ambient temperature, and the intended use of the vehicle.