I am aware that this thread is older… I’ve done a lot of research on this and have discovered 3 viable choices. The hub bore of the Tacoma is larger even though the wheel stud spacing (6 X 5.5) is the same (106mm vs 100mm on the Xterra). Make sure the wheel is properly centered. Steel wheels may be mounted easily using your stock Nissan hubs. Steel wheels can’t use hub rings since there isn’t a counter bore for the rings to fit into, thus you must center them properly using the lug nuts (not the best option, but doable).
New lug studs must be purchased and replaced. On its aluminum wheels, Toyota uses lug shanks, also known as mag shanks. The wheels could come off if you use the standard acorn seat lug nuts (Nissan style). In fact, I’ve witnessed someone attempt this and lose a wheel while driving. Here is a picture…
If you’re set on using aluminum wheels, you can follow my lead. Go to O’Reilly Auto Parts and ask a knowledgeable employee to hunt up some lug nuts in their catalog for you (they cost about $3 apiece). You can replace ALL OF YOUR WHEEL STUDS with some that meet the following requirements:
In This Article...
Q: What rims are interchangeable between different cars?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.
Q: What cars use a 5114 3 bolt pattern?
A wheel hub with 114, 3 and 5 bolts or nuts is all that a 5114 3 bolt pattern is. 5114,3 bolt designs are used by various car manufacturers and models.
Does 6×5 5 equal 6×139 7?
Premium Subscriber They all follow the same bolt pattern. Although one is listed in metric and the other in standard, they are identical. Therefore, they do fit.
A 6×5-5 bolt pattern: what is it?
The stud count (six) and bolt circle dimension (5.5), the notional circle determined by the studs’ centers, make up the 6×5.5 Bolt Pattern or Pitch Circle Diameter (PCD).
Vehicles from Acura, BAIC, BAW, Cadillac, Chery, Chevrolet, and Daewoo all have the 6×5.5 bolt pattern. The following is a complete list of car makes and models:
Does a Nissan Xterra fit Toyota wheels?
The Toyota wheels are snug. Though hubcentric spacers are available, they are not necessary. Get a solid pair of lug nuts, torque your wheels according to the recommended order, and you should be ready to go. My vehicle was a 2002 4 runner. Are you a Hawaii native? based on the Ahis on your profile picture, I’m assuming you’re?
You might not get a response because this is an old thread, and you might be restarting an old thread. Consider starting a new thread, please.
Which wheels will fit a Nissan Frontier?
16×8 wheels 265/70 and 285/75 tires, which may rub or require trimming. 17×8 wheels with 5 265/70 tires. 18×9 wheels 285/60 and 265/60 tires. Popular wheel sizes for a Nissan Frontier of the second generation with a leveling kit:
16×8.ss 17×8.ss 18×9.
How can I tell whether my rims work with them?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. You can get the typical rim size from there.
Can I use wheels from another car?
You should choose a replacement for your car with the utmost care because rims are crucial to vehicles. It would look out of place and interfere with your drive if you made the wrong choice.
Usually, you are able to swap your wheel for one from another car. The size (diameter and width), center bore, offset, and bolt pattern of the corresponding rims are some of the variables that affect this. Both sides ought to have similar characteristics overall.
A 6×135 bolt pattern: what is it?
6×135 bolt pattern What automobiles include a 6×135 bolt pattern? The stud count (six) and bolt circle measurement (135), the notional circle determined by the studs’ centers, make up the 6×135 Bolt Pattern or Pitch Circle Diameter (PCD). Ford and Lincoln automobiles all use the 6×135 bolt pattern.
Can Honda wheels be used on a Toyota?
Hello, no, your Honda rims won’t fit on your Toyota Corollaat least not the OEM ones. The center bore on your Toyota rims is 54.1mm, whereas the center bore on your Honda rims is 56 or 64mm, despite the fact that the bolt pattern is the same. The center hole in the Toyota rims is too small for the Honda hub, thus they won’t fit on the hub.
Are the six lug patterns uniform?
Different bolt patterns exist. It’s possible that the pattern on two separate cars with the same number of lugs will differ. The majority of manufacturers, including Chevy, use the same bolt pattern for all of their vehicles or for all of their different vehicle classes.
Will Silverado wheels fit Nissan Titan rims?
Given that both the chevrolet/gmc and the titan have a 6×5.5 bolt pattern, your factory OEM rims will fit a chevy. However, the OEM Chevrolet wheels have 0 offset, while the OEM Nissan wheels have a +25mm offset. As a result, the Nissan rims will protrude an additional 1/2 to 1 inch from the Chevy pickup’s wheel well. Regarding the tire setup, I’m not sure if a chevrolet will fit the 285/70R17 for the offroad package. Hope this was useful.