To switch off your TRAC, just push and hold the VSC Off button next to your gear shift. Near your speedometer, look for the TRAC OFF indication light. You will also find your VSC Off indication light here. Simply press the button once more to turn the TRAC back on.
In This Article...
How does the Toyota Highlander’s VSC reset?
Vehicle Stability Control, or VSC as it is commonly known, is the stability control system used in Toyota automobiles. By lowering or eliminating the power provided to your wheels, stability control aids in the maintenance of traction and control in your vehicle. By automatically providing brake pressure to up to three wheels, it achieves this. The system’s main objective is to keep your car traveling in the direction of its wheels. Since 2012, at least in the USA, it has become a necessary safety requirement. Naturally, VSC OFF denotes that your Toyota’s stability control is turned off.
VSC Light Easy Fix
Depending on the model year of the Toyota, a button with the same icon as the light in your gauges will be located either next to your shifter or next to your steering wheel. When you’ve found it:
- Ensure that you have come to a complete stop. If you can, put the car in park.
- For a few seconds, hold down the VSC button.
- The indicator lights for TRAC OFF and VSC OFF will turn on. Now both systems are off.
- Once more, press the VSC button. As soon as both lights go out, the systems are back in operation.
If the VSC OFF light is still on, there can be a glitch in your car’s computer or a problem with the VSC system. Bring your car to a Toyota service location near you so a qualified technician can check the codes and identify the problem. Although it is safe to drive your Toyota even with the VSC OFF light on, we advise caution, especially in bad weather.
In Need of Repair?
Bring your car to the Toyota of Arlington servicing facility if you live close to Chicago and need repairs. We can install OEM parts for you because we have access to them. Get a free estimate from our outstanding collision facility if you need body work.
What location does the VSC system have?
Try resetting the VSC light as an easy remedy. Maybe the VSC light was merely intermittently on due to some issue. Try these to try to reset your VSC light:
- Put the gear in Park and come to a stop.
- Search for the VSC button. Depending on the model of your car, it may be at the steering wheel or behind it, although it is frequently close to the gear stick.
- For a few seconds, press and hold the VSC button.
- The TRAC OFF and VSC OFF indication lights will now turn on, as you can see. The VSC system and traction are both currently disabled.
- For a second, press the VSC button once more. The systems are now reengaged as the TRAC and VSC lights both disappear.
If this doesn’t solve the issue, you should examine the trouble codes and conduct proper troubleshooting. If you don’t have the skills to do it yourself, take your car to a shop.
What triggers the Toyota Highlander’s VSC light?
The Toyota Highlander is a midsize sport utility vehicle with automatic gearbox, all-wheel drive, and third-row seating with a variety of comfort features. Air bags, a tire pressure monitoring system, and a vehicle stability control system are all standard safety features. The “VSC” light may come on the dashboard as a result of specific car problems interfering with the vehicle stability control system. It could be able to reset the VSC warning light on your car’s dashboard by making a quick fix.
Step 2
Examine the engine area by opening the hood of the car. Find the air filter box that is positioned to the engine’s left. The air filter box has a square, black exterior and a big intake pipe with ribs.
Step 4
To turn off the “VSC” warning light that is illuminated on the dashboard, start the engine and move the car. After driving the car normally, if the VSC light doesn’t turn off, move on to the next step.
Step 5
Set the parking brake, turn off the engine, and place the car in park. Utilizing a proper size socket, pry open the bonnet of the car and detach the battery’s negative cable for 15 seconds. Resetting the vehicle’s computer and eliminating the “VSC” warning require disconnecting the negative battery connector.
C1201:
The two P0 codes indicate that the emissions system has a leak. Technically, it might be in the charcoal canister or filler neck, but most of the time it’s just a leaky gas cap. Either a worn-out cap or one that was put incorrectly.
The car is instructed to switch on the check engine light and turn off the traction and VSC by the C1201 code. In essence, this code is responsible for alerting you to an issue when the other two appear. Since they are the ones that created it, fixing the other codes should also repair this one.
How much does a VSC sensor repair cost?
Lexus VSC repairs would cost between $200 and $300. But that depends on what made the light come on. Vsc collaborates with the ABS and other auto parts. Therefore, it is best to find the problem before discussing how much to remedy it.
The VSC button is what?
Turn off the Traction Control (or TRAC) and the Vehicle Stability Control if you can’t move your car (VSC). When you succeed, your car will be free to rock.
Why are my traction control light, check engine light, and flashing VSC light on?
You must stop driving the car if the check engine light is flashing. If the engine controller has identified a problem with the engine management system, the check engine light will illuminate steadily. If the defect is likely to harm the catalytic converter, it will flash. The VSC light, which is for the Vehicle Stability Control system, is likely signaling that whatever issue is present, it affects both systems. In other words, you probably only need to do one repair to fix both lights. The warning lights also let you know that the controller has failure codes that can be read by a specialist using the right scanning tools. The diagnosis will be aided by this. If you get in touch with YourMechanic, they’ll send a specialist to your house or place of business to check your car’s controllers for codes and advise you on the best course of action.
What does the Toyota Highlander’s TRAC OFF signify?
Indicator with “TRAC OFF” The TRAC/VSC systems may decrease engine power to the wheels if the car becomes stuck in fresh snow or mud. In order to liberate the vehicle by rocking it, you might need to turn the system off. Press and release the button fast to turn off the TRAC system.
How does the VSC light appear?
The slip indicator flashes to show that Vehicle Stability Control (VSC) and/or Traction Control (TRAC) are active in order to restore traction if the system detects that your tires may be slipping. If the light continues to illuminate, there may be a problem with the TRAC/VSC system as a whole.
What does it cost to repair the VSA system?
The VSA system repair typically costs between $80 and $90. The average price for Honda is this amount. With labor expenses ranging from $38 to $48 and parts costing about $43,
Author: DJ
Automotive technician Dave Junior has practical experience servicing, diagnosing, and repairing both domestic and foreign vehicles. He takes pleasure in writing and disseminating his knowledge.
Can you drive with a VSC light for how long?
It is still possible to drive your car if the Check Engine light comes on for any reason, but it is only advised to go another 50 to 100 miles before checking your car’s computer for problem codes. You can pinpoint the problem at hand using this technique and deal with it however you see proper.
Why did my check engine and traction control lights turn on, Toyota?
A system bulb check is initiated as the ignition key rotates through the phases of Off, Run, and Start. As the car starts and runs, the traction control system light should come on for one to two seconds before going out. If the indicator continues to illuminate, either the traction control system is malfunctioning or the system has been disengaged.
When the TRAC off light is on, may I drive?
While driving with the traction control light on is normally safe, there are several situations where it is not. Your entire braking system could be impacted if the traction control, anti-lock braking system, and red brake warning lights are illuminated.