The 2016 Toyota is protected with cutting-edge synthetic material that resists chemical breakdown for ultimate wear protection for your car. This goes much further than the typical 3,000-mile oil change frequency. Filtered, 6.4 quarts Check the oil level after refueling.
In This Article...
What amount of oil does a 2016 Toyota Highlander require?
You must first determine how many quart bottles to purchase. What is the oil capacity of the 2016 Toyota Highlander?
The oil capacity of a Highlander with a basic four-cylinder engine is 4.6 quarts, including the filter. The V6 Highlander’s oil capacity, with the filter in place, is 6.4 quarts. Depending on your model and how low the oil level is, you’ll need four to six quart-sized bottles of engine oil if you buy them.
Keep in mind that oil capacity and engine displacement are not the same. The 2.7-liter and 3.5-liter denominators, for example, indicate the volume that the engine’s cylinders occupy rather than the engine’s oil capacity.
What kind of oil does a 2016 Toyota Highlander need?
Engine oils differ from one another. Toyota specifies that Toyota Genuine SAE 0W-20 full-synthetic motor oil should be used in Highlander vehicles. In general, following the manufacturer’s advice will ensure peak performance.
Let’s rapidly decipher what those digits and letters signify. The Society of Automotive Engineers, or SAE, assigns codes to measure oil viscosity. The values indicate the viscosity or thickness of the oil. The oil is thicker the higher the number. Less viscosity means your engine will last longer.
Winter is represented by the W. When an engine is cold, the 0 in 0W-20 indicates that the oil has a low viscosity. It works nicely in chilly weather. The 20 warns you that at operating temperatures, this oil is likewise fairly thin.
Any premium full-synthetic oil will work in your 2016 Highlander as long as it satisfies the aforementioned viscosity standards. For instance, Mobil 1 offers two different full-synthetic motor oil options: Extended Performance 0W-20 and High Mileage 0W-20.
Here are three suggestions to assist you in choosing the proper oil:
Use Toyota Genuine motor oil and adhere to the manufacturer’s guidelines to the letter.
Try Mobil 1’s extended performance engine oil if you want to go between oil changes less frequently. It’s a premium synthetic blend.
Which 0W 20 motor oil is the best?
Top 5 Amazon 0W-20 Oils
- One quart of Mobil 1 0W-20 Full Synthetic Motor Oil (Mobil 1 0W-20)
- 1 Quart of Shell Rotella T 0W-20 Crz Motor Oil (Shell Rotella T 0W-20 Crz)
- Full synthetic motor oil in the Valvoline MaxLife 0W-20 range, 1 quart (Valvoline Maxlife 0W-20)
How frequently should a 2016 Toyota Highlander have its oil changed?
For traditional oil, Toyota suggests changing your 2016 Toyota Highlander’s oil and filter every 3,000 to 5,000 miles. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. Remember that the best way to determine the optimal intervals for your vehicle is to consult the owner’s manual and your dealer.
For a 2016 Toyota Highlander, how much does an oil change cost?
A Toyota Highlander oil change typically costs between $127 and $138. Between $37 and $46 is the expected cost of labor, while between $90 and $92 is the estimated cost of parts.
Toyota uses synthetic oil for what reason?
In addition to preventing corrosion and lumping, the ideal mixture of Toyota Synthetic and Mobil 1 Synthetic Motor Oil functions smoothly in both low and high temperatures. Every six months or 10,000 miles, Toyota advises having factory-trained technicians perform an oil change (whichever comes first).
How frequently should a Toyota Highlander have its synthetic oil changed?
Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. For traditional oil, Toyota suggests changing your 2020 Toyota Highlander’s oil and filter every 3,000 to 5,000 miles.
A 3.5 L Toyota Highlander uses how much oil?
The 2.7L 4-cylinder engine consumes 4.6 quarts of oil, while the 3.5L V6 engine requires 5.8 quarts. Both engine options are available for the 2018 Toyota Highlander.
Keep in mind that synthetic oil is recommended for both of these engines whenever you need to replace the oil!
It can be enjoyable to shop for a new automobile, but it’s not necessarily the best to do the same for your auto insurance. Thank goodness, the Jerry app has made it simpler than ever to compare prices on vehicle insurance.
The Jerry app, a registered broker that provides end-to-end support, compiles reasonable rates, assists you in switching plans, and even assists you in terminating your old policy. Jerry will even assist you in combining your auto and house insurance for the greatest savings!
The amount of oil that a Highlander consumes
Response given by. The oil capacity of the 2019 Toyota Highlander is 6.3 quarts. When changing the oil in your Highlander, remember that Toyota advises using synthetic oil! Check your auto insurance to make sure it’s the best policy for you when you’re shopping for a new vehicle.
What kind of oil should I use for my 2021 Toyota Highlander?
The best option for optimum fuel efficiency and reliable starting in cold weather is engine oil SAE 0W-16. In the absence of SAE 0W-16, 0W-20 oil may be used. At the subsequent oil change, SAE 0W-16 must be used in its stead.
How frequently should 0W-20 oil be replaced?
The manufacturer has approved an oil change interval of 10,000 miles or 12 months for Toyota vehicles that utilize 0w-20 synthetic oil. When using this type of oil, vehicle owners should periodically check the engine’s oil level and top it off as necessary. This will enhance the effectiveness of the synthetic oil. The 10,000-mile oil change interval has NOT been approved by Toyota if you operate a Toyota Tundra or Toyota Sequoia that is fitted with a flex fuel-compatible engine.
Some engines may safely run on 0w-20 synthetic oil despite being tuned to run on 5w-20 mineral oil. Even if synthetic oil is used, these engines will still require the 5,000-mile/six-month oil change period.
Other maintenance tasks
Owners shouldn’t disregard the other maintenance requirements of their car just because it has a longer time between oil changes. Despite the fact that the oil only needs to be changed once a year, or after 10,000 miles, the 5,000-mile services are still necessary. This would cover procedures like brake inspections and tire rotations.
Toyota continues to demand the 5,000-mile/six-month interval from owners who frequently make short journeys in below-freezing weather, drive on dirt roads, off-road, or tow big loads. Even if an owner uses synthetic oil, this is still true.
What Are the Benefits of Synthetic Oil?
It mostly depends on the model you purchase, how the engine was made, and what is advised in the owner’s manual whether your new Toyota utilizes synthetic or traditional oil. There are advantages and disadvantages to using each type of oil, but here are a few of the advantages of synthetic oil. Before using synthetic oil, make sure to verify with the Toyota service center in your area.
- increased protection against engine wear
- Enhanced Protection at Higher Temperatures
- Better Performance at Low Temperatures
- Enhanced Protection for Performance and Turbocharged Parts
- Synthetic Oil Maintains Cleaner Engines
How Often Should You Change Synthetic Oil?
To guarantee best performance, standard oil change intervals are commonly set as 5,000 miles or 6 months. That period is increased to 10,000 miles or 12 months on Toyota cars that are required to use 0W-20 synthetic oil. Within that time frame, you should still periodically check and top off the oil level. For other models, synthetic oil is an option, and regardless of the type of oil you choose to use in those models, it is advised that you stick to the 5,000-mile/6-month intervals.
Your Owner’s Manual
Although it’s really easy, owners manuals are frequently disregarded. To find out the appropriate viscosity of the motor oil you should use, always consult your owner’s handbook. Use the 0W20 and 5W20 variations interchangeably, depending on the weather, if they are both on the list.
Location
Given that both 0W20 and 5W20 motor oils operate in much the same temperature range, it is critical to think about where you will be using the car. The operating temperature range for synthetic oil is -40C to 20C for 0W-20 and -35C to 20C for 5W20 (5W20 synthetic oil). Being aware of these facts means two things:
- In places like Florida when the temperature is above 20C/68F, you cannot use either 0W20 or 5W20.
- If you reside in a region with extremely low temperatures, such as Alaska or Maine, it is preferable to use 0W20 oil.
Viscosity
The motor oil will flow more smoothly the lower the number is. At beginning temperatures, a 0W20 will be more fluid than a 5W20, but both will function similarly at normal engine operating temperatures. Keep in mind that engine oils naturally become thinner during heating and thicken while cooling.
Quality Testing
Any oil brand with the appropriate viscosity grade and the API donut symbol is acceptable. The oil has passed the testing required for SL service, as indicated by the starburst sign.
The API donut indicates that your motor oil passed the current SL service rating test after being tested by the American Petroleum Institute. ACEA (Association des Constructeurs Europeens d’Automobiles) is the counterpart of API in Europe.
Manufacturer Requirements
If your vehicle is substantially loaded, the machine designer would typically advise using an oil that has a high viscosity and is heavy like honey. However, if it moves quickly, a lubricant that can move out of the way and then move back in is preferable.
Fuel Economy
Despite the fact that both 5W20 and 0W20 (0W20 synthetic oil) can be used at 20C/68F, 0W20 is thinner than 5W20 at cold engine temperatures, particularly in the initial minutes after starting your automobile. Because it gives the car slightly higher fuel economy than the 5W20, new models specify it. The 0W20 model satisfies a turbo-diesel engine’s requirements as well.
Toyota 0w20 is fully synthetic, right?
Finding the ideal motor oil for your car is more challenging now that there are so many options available. Oil types like OW-20 are currently becoming much more widespread. Why should you use this oil? What is it?
Toyota car owners now favor the new 0W-20 Oil over other types of oils.
The cost of a quart of the pure synthetic 0W-20 oil is approximately $6.36. Although a quart costs quite a bit, it is the best oil you can use in your Toyota.
The use of synthetic oil is spreading. Simply said, it outperforms traditional motor oil in a wider range of driving circumstances and doesn’t degrade as quickly. Toyota advises using it in all of their vehicles, with the exception of select 4Runner/Tacoma and Flex Fuel Tundra/Sequoia models, because it is so well-liked (see: is Synthetic Oil Good or Bad).
Visit your local Toyota dealership soon and ask about this new, lighter oil. These days, it is the ideal option for your Toyota automobile.
Which oil does Toyota use right out of the factory?
FAQs on Toyota Oil Change The use of certified and approved oil in your car is advised by the manufacturer. For brand-new vehicles, Toyota suggests using Toyota Genuine SAE 0W-20 Full-Synthetic motor oil.