In order to address a braking issue that arises after the vehicle has been serviced using genuine brake fluid and non-factory fill, Toyota Motor Sales has announced it will undertake a voluntary safety recall.
740,000 vehicles sold in the United States are affected by the recall, including the following models: 2005-2006 Avalon, 2004-2006 Highlander (non-hybrid), Lexus RX330, and 2006 Lexus GS300, IS250, and IS350.
The brake warning signal may illuminate as a result of a little amount of brake fluid leaking from the brake master cylinder. The driver will start to notice a spongy or soft brake pedal feel, and braking performance may gradually deteriorate, if the brake warning lamp has illuminated and the vehicle is driven without replacing the master cylinder brake fluid reservoir.
Non-factory Toyota brake fluid supplied during system maintenance was identified as the leak’s cause. According to Toyota, some replacement brake fluids are deficient in a specific polymer that prevents the internal rubber seal (also known as the brake master cylinder cup) at the piston’s tip from drying up and curling when the brake pedal is depressed.
According to the news release, “Polymers are present in the Toyota Genuine Brake Fluid utilized in car assembly for automobiles marketed in the United States. For some brake system parts, the polymers serve as lubricants.
A material that can function in an environment with lower quantities of this polymer was used to create the revised seal. No matter what type of brake fluid is used to maintain the system, this ought to stop any additional leaks.
Toyota recommends using DOT3 brake fluid that complies with SAE J1703 or FMVSS No.116 in its owner’s manuals and service instructions. These recommendations are still valid, and any brand of brake fluid is appropriate so long as it complies with DOT or SAE standards.
These standards emphasize compressibility and boiling point, but they also emphasize lubricating characteristics, seal compatibility, and corrosion resistance. However, each manufacturer of brake fluid has their unique set of additives. Usually, the unidentified polymer is a part.
First class mail will be used to contact the owners of the relevant vehicles starting in early November 2010. Dealerships for Toyota and Lexus will swap out the brake master cylinder cup for a brand-new model at no cost to the owners of the vehicles.
In This Article...
Can DOT 4 brake fluid be used in a Toyota?
The majority of people working in the automobile industry are likely aware of Toyota’s request that Dot 3 fluids rather than Dot 4 fluids be used in its cars or the brake systems will lose their guarantee. Although it is worth noting that practically all Toyota cars have a reservoir where it clearly indicates that Dot 3 is to be used, it looks that the 100 Series Landcruiser is the main model affected by these potential issues.
Apart from Dot 4’s higher boiling point and the fact that it adheres to a higher industry specification standard, there has long been a widespread belief in the sector that there is no difference between the two.
The majority of Australian producers claim that the two have different compositions. If this is the case, how is it possible that Dot 4 fluids have been flushed through Toyota automobiles’ systems for years without causing any obvious issues?
That is a legitimate query. NBS has extensively compared several fluid brands from around the world. Today, the majority of producers produce both. Does that suggest that you are forced to keep both fluids on hand?
Is it too wonderful to be true? Customers have been successfully using our brake fluid for a very long time on many types of vehicles, including Toyotas! For any vehicle where the manufacturer recommends Dot 3 or 4, the fluid is guaranteed to work.
That’s what you need, right? Don’t wait any longer; call our sales team right away at freecall Australia Wide.
Is DOT 3 brake fluid from Toyota synthetic?
Registered. The braking fluid used in DOT 3, DOT 4, DOT 5, and DOT 5.1 is all synthetic. Glycol-ether-based DOT 3, DOT 4, and DOT 5.1 fluids are compatible with the original equipment Toyota fluid.
How is DOT 4 brake fluid utilized?
For use in automobile disc, drum, and anti-skid brake systems as well as clutch systems, Mobil Braking Fluid DOT 4 is an exceptionally high performance hydraulic brake fluid.
Which is preferable, DOT 3 or DOT 4?
brake fluid DOT 4. The following are the main distinctions between the two: Over time, DOT 3 brake fluid will collect less water from the air than DOT 4, resulting in fewer frequent fluid changes. Due to its higher dry and wet boiling points, DOT 4 brake fluid is more heat-resistant.
What happens if DOT 3 and DOT 4 brake fluid are combined?
Can DOT 3 and DOT 4 be combined? Since DOT 3 and DOT 4 brake fluids are both glycol-based, mixing them is not a problem, but you should be aware that the boiling points will alter.
Can Dot 3 and Dot 4 brake fluid be combined?
Yes, you can combine Dot 3 and Dot 4 brake fluid. Because both of these brake fluids are glycol-based, they are compatible with one another. It is not advised to fill your automobile with Dot 3 if it came with Dot 4 from the manufacturer, however the other way around is acceptable.
If your vehicle came equipped with Dot 3 and you frequently tow a trailer or drive up steep slopes, we strongly advise replacing it with Dot 4.
Can you mix Dot 5 with dot 3 and dot 4?
A silicone-based braking fluid is called Dot5. It is incompatible with ABS systems and does not absorb water from the atmosphere. It functions effectively and keeps its integrity. Additionally, compared to Dot3 and Dot4, it has a greater boiling point, making it more suitable for driving that is too aggressively.
It should never be combined with Dot3 or Dot4 liquids since they are incompatible. If you want to discover if your braking system is compatible with Dot5 brake fluid, you need also pay attention to the manufacturer’s instructions.
What occurs if I choose the incorrect brake fluid?
Inadequate lubrication, overheating, and possibly transmission failure can result from using the incorrect fluid. Even after flushing the transmission, a mechanic might not be able to undo the damage. Your transmission might also be ruined if you accidentally add motor oil or brake fluid.
Can You Mix DOT 5 and DOT 5.1?
No, DOT 5 and DOT 5.1 are completely distinct braking fluids despite having similar names. Comparing DOT 5 and DOT 5.1 is not too difficult. While DOT 5 is silicone-based, DOT 5.1 is glycol-based. This renders their combination intolerable.
Can You Mix DOT 5 and DOT 4?
No, DOT 4 is fundamentally incompatible with DOT 5 braking fluid because it is glycol-based. You’ll need to flush the entire system several times to correct the problem if your fluids do mix.
Can You Mix DOT 5 and DOT 3?
No, only DOT 5 brake fluid can be mixed with extra DOT 5 brake fluid. This is due to the fact that only DOT 5 is silicone-based; all other braking fluids are glycol-based. Your car’s brakes may operate poorly or even lock up if the brake fluid isn’t the right kind. Not at all.
Should You Switch to DOT 5 Brake Fluid?
You shouldn’t switch to DOT 5 brake fluid until absolutely necessary. Additionally, once you make the conversion to DOT 5, there is no turning back.
No matter how many times you flush your brakes, DOT 5 will never completely leave the system. No matter if you drive a Buick or a Harley Davidson, once you switch, you’re trapped unless you replace every part of your brake system.
Furthermore, if your car has ABS brakes, you must never switch to DOT 5 brake fluid. The majority of more recent automobiles have these, which means that DOT 5 brake fluid compatibility is not an issue.
This is due to the fact that DOT 5 brake fluid foams when repeatedly applied and removed, which is exactly how ABS brakes operate. Your brakes will become mushy, making it impossible for you to stop quickly or at all.
In addition to the additional expenditures, DOT 5 brake fluid necessitates additional maintenance to avoid soft brakes and rusted parts. Avoid switching if you are considering it. However, do not go back to using DOT 5 if your vehicle currently does so.
What happens if brake fluid is combined?
Both DOT 4 and DOT 5.1 braking fluids, which both contain glycol, are widely utilized in the automobile and cycling industries. The Department of Transportation (DOT) established the standards that are used to regulate them, hence the name.
The boiling points of these two brake fluids are the primary distinction. The minimum dry and wet boiling points are one of the requirements that DOT fluid producers must meet. These are the lowest temperatures that the brake fluid can operate at without beginning to boil, which can result in a complete failure of the brakes.
Let’s look at the Department of Transportation’s recommended minimum boiling temperatures for DOT brake fluid.
Remember that these are merely the basic requirements. It is feasible to find DOT 4 brake fluid with a higher boiling point than other DOT 5.1 fluids on the market, and brake fluid producers frequently do so.
Since DOT 4 and 5.1 are both glycol-based brake fluids, they can be mixed without damaging your brake system because they are compatible with one another. Never confuse DOT 5.1 (a glycol-based fluid) with DOT 5, a silicone-based fluid that must never be used with any other DOT fluid.
Which braking fluids can you actually combine without damaging your brake system, then? Let’s examine the graph below.
The silicone-based DOT 5 is the odd one out in this group and is incompatible with all other DOT brake fluids, as can be shown. The worst that can happen when mixing DOT 3, 4 and 5.1 braking fluids, providing it is new fluid, is a decrease in the boiling point of the entire fluid.
Some brake producers, including Hayes and Formula, ship their brakes with DOT 4 brake fluid already added. Some manufacturers, like Hope and Avid, decide to employ DOT 5.1 in their brakes. In order to take advantage of the higher boiling point and enhanced heat resistance of DOT 5.1, many riders with DOT 4 in their brakes will choose to bleed with it.
How frequently should DOT 4 brake fluid be changed?
Regardless of mileage, the majority of automakers advise changing the brake fluid every two years. Even though the fluid might last longer, why take the chance?
Change the fluid even if it appears to be in good condition. The moisture in the fluid won’t be visible to you because it only exists on a microscopic scale. Checking your dependable Haynes Manual is the best and most reliable way to know.
It’s important to remember that even if you don’t change your brake fluid, you should check it on a regular basis. You should at the very least be scanning it quickly once every few weeks. Which conveniently brings us to…
How frequently should brake fluid be flushed?
You can always fall back on your suggested maintenance schedule for replacing brake fluid if all else fails. An average brake fluid flush is required every two years or 30,000 miles.
Your driving habits have a big impact on routine maintenance. For instance, you could require more frequent brake fluid flushes if you typically drive shorter routes with more frequent braking. For details unique to your vehicle regarding brake fluid, consult your owner’s handbook.