Three distinct engines are employed in the 2009 Toyota Camry’s seven various variants. A total of 4.5 quarts of SAE 0W-20 full synthetic motor oil will be used by two distinct 2.4L 4Cylinder engines. In the short run, SAE 5W-20 can be used in its place. The larger 3.5L V6 engine needs 6.4 quarts of SAE 5W-30 full synthetic oil, although you can temporarily switch it out for SAE 5W-40. If possible, these substitutions should be avoided. Using an oil with a higher weight results in a thicker viscosity, which introduces friction into the system and can hasten the wear and tear on your engine, leading to an earlier failure. Therefore, even if it costs a little bit more per oil change, it’s crucial to use the lowest weight oil that Your manufacturer has recommended.
Manufacturer-recommended 0W-20 synthetic oil is used in the 2009 Toyota Camry with either the 2.4L inline-4 engine choice (engine codes [B] 2AZ-FXE or 2AZ-FE) or 5W-20 synthetic oil. The 3.5L V6 engine in the 2009 Toyota Camry runs on 5W-30 synthetic oil.
In This Article...
What sort of oil will fit in a Toyota Camry?
The Toyota Camry 2020 requires 0W-20 synthetic motor oil. Toyota sells an additive at Toyota dealerships that is applied to their OEM oil. However, any ILSAC-certified 0W-20 synthetic oil will function. If 0W-20 synthetic oil is not available, 5W-30 mineral oil will function in its place. At the subsequent oil change, it must be replaced with 0W-20 synthetic oil.
How often should I change the oil in my Camry?
The owner’s manual for your Camry contains a list of the precise service intervals. However, the interval for the most majority of synthetic oil situations is every 10,000 miles or 12 months*. The interval for older Camry vehicles that utilize 5W-30 mineral oil is 5,000 miles/6 months. Even in vehicles with a 10,000-mile/12-month oil change interval, other maintenance like tire rotation and fluid adjustments still needs to be done every 5,000 miles/6 months.
*According to Toyota standards, this period is reduced to 5,000 miles/6 months if you frequently make short excursions (i.e., only in cities) in below-freezing conditions or with heavy idling.
How often should an oil change be performed on a 2009 Toyota Camry?
Every six months or 5,000 miles, whichever comes first, you should change the oil in your Camry. The synthetic oil in your vehicle needs to be changed once a year or every 10,000 miles. Consistency is ultimately the key to ensuring that the engine of your car can function effectively.
Can I substitute 0W-20 oil for 5w20 oil?
The 20 in 0W motor oils (also known as 0W-20) stands for the viscosity measurement value, making them appropriate for usage in 5W applications. The most important factor to match when choosing a motor oil is that value. The pumpability at cold temperatures is shown by the 0W or 5W. Consequently, a 0W would flow more freely than a 5W and might be a suitable replacement. As a result, SAE 0W-20 can be used in place of SAE 5W-20 application.
**Provides improved fuel economy and faster flow while yet offering the same level of protection as 5W.
What makes 0W-20 and 5W-20 different from one another?
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
What is the purpose of 0W-20 oil?
The innovative full synthetic motor oil Mobil 1TM 0W-20 is made to help keep your engine running like new and safeguard crucial engine components for up to 10,000 miles between oil changes* while also providing superior engine protection and improved fuel economy benefits. The performance of Mobil 1 0W-20 is superior to that of our traditional and synthetic blend oils, and it meets or surpasses the strictest industry standards. Many different cars, including some high-performance ones, come with Mobil 1TM synthetic motor oil technology as standard equipment.
Using synthetic oil in a 2009 Toyota Camry is possible.
For my 2009 Toyota CAMRY, the best synthetic oil, filter, and transmission fluid are recommended. In the US, AMSOIL was a synthetic oil industry pioneer.
Do I need synthetic oil for my Toyota?
Only Toyota cars (apart from 3UR-FBE Engines*) that require 0w-20 synthetic oil have been given the go-ahead for longer oil change intervals of 10,000 miles or 12 months. (You should, though, keep checking the oil level frequently and topping off as necessary. This will enable your engine to benefit fully from synthetic oil.)
Toyota 0W-20 oil is synthetic, right?
Finding the ideal motor oil for your car is more challenging now that there are so many options available. Oil types like OW-20 are currently becoming much more widespread. Why should you use this oil? What is it?
Toyota car owners now favor the new 0W-20 Oil over other types of oils.
The cost of a quart of the pure synthetic 0W-20 oil is approximately $6.36. Although a quart costs quite a bit, it is the best oil you can use in your Toyota.
The use of synthetic oil is spreading. Simply said, it outperforms traditional motor oil in a wider range of driving circumstances and doesn’t degrade as quickly. Toyota advises using it in all of their vehicles, with the exception of select 4Runner/Tacoma and Flex Fuel Tundra/Sequoia models, because it is so well-liked (see: is Synthetic Oil Good or Bad).
Visit your local Toyota dealership soon and ask about this new, lighter oil. These days, it is the ideal option for your Toyota automobile.
Your Owner’s Manual
Although it’s really easy, owners manuals are frequently disregarded. To find out the appropriate viscosity of the motor oil you should use, always consult your owner’s handbook. Use the 0W20 and 5W20 variations interchangeably, depending on the weather, if they are both on the list.
Location
Given that both 0W20 and 5W20 motor oils operate in much the same temperature range, it is critical to think about where you will be using the car. The operating temperature range for synthetic oil is -40C to 20C for 0W-20 and -35C to 20C for 5W20 (5W20 synthetic oil). Being aware of these facts means two things:
- If you reside in a region with extremely low temperatures, such as Alaska or Maine, it is preferable to use 0W20 oil.
- In places like Florida when the temperature is above 20C/68F, you cannot use either 0W20 or 5W20.
Viscosity
The motor oil will flow more smoothly the lower the number is. At beginning temperatures, a 0W20 will be more fluid than a 5W20, but both will function similarly at normal engine operating temperatures. Keep in mind that engine oils naturally become thinner during heating and thicken while cooling.
Quality Testing
Any oil brand with the appropriate viscosity grade and the API donut symbol is acceptable. The oil has passed the testing required for SL service, as indicated by the starburst sign.
The API donut indicates that your motor oil passed the current SL service rating test after being tested by the American Petroleum Institute. ACEA (Association des Constructeurs Europeens d’Automobiles) is the counterpart of API in Europe.
Manufacturer Requirements
If your vehicle is substantially loaded, the machine designer would typically advise using an oil that has a high viscosity and is heavy like honey. However, if it moves quickly, a lubricant that can move out of the way and then move back in is preferable.
Fuel Economy
Despite the fact that both 5W20 and 0W20 (0W20 synthetic oil) can be used at 20C/68F, 0W20 is thinner than 5W20 at cold engine temperatures, particularly in the initial minutes after starting your automobile. Because it gives the car slightly higher fuel economy than the 5W20, new models specify it. The 0W20 model satisfies a turbo-diesel engine’s requirements as well.
Which is preferable, 5W-30 or 0W-20?
Pay particular attention to the quality testing done while selecting a motor oil. Both the API donut and the starburst sign should be visible on the packaging.
The American Petroleum Institute’s testing was successful, as evidenced by the API donut. The starburst is also used to demonstrate eligibility for SL service.
Location
You must take the region into account while selecting the ideal oil viscosity from the suggested possibilities. For instance, 5W20 can be used in somewhat warmer settings while OW20 will perform better in cold climates like Maine or Alaska.
Having knowledge of the temperature range aids in selecting the proper oil. The temperature range for 0W-20 oil is -40 to 68F. In contrast, the operating temperature range for 5W20 oil is -31F to 68F and for 5W30 oil is -31F to 104F.
Fuel Economy
Because the lubricant flows more easily, the higher the fuel efficiency, the thinner the oil viscosity. As a result, 5W20 will run similarly to 0W20 once the engine has warmed up, but 0W20 will be more fuel-efficient during startup.
In both colder and warmer climates, 0W20 offers greater fuel efficiency than 5W30. However, 5W20 only performs better than 5W30 in hotter environments.
You can give the engine the protection it needs to last longer by using the proper oil in it. Make sure you do your study before selecting oil to attain the performance level you need.