High Mileage 5W-20 Full Synthetic Motor Oil, 5 Quart, from Mobil 1 (Part No. 120768)
In This Article...
Will 5W-30 work in a Toyota Corolla?
* Recommended viscosity (SAE): SAE 0W-20, 5W-20, or 5W-30 engine oil is advised in severely cold temperatures since SAE 10W-30 or a higher viscosity engine oil may make it difficult to start the engine.
Here is an explanation of oil viscosity using 0W-20 as an example.
The characteristic of the oil that allows for cold starting is indicated by the 0W component of the oil viscosity rating. Engine starting in cold conditions is made easier by oils having a lower value before the W.
The number 20 in 0W-20 denotes the oil’s characteristic viscosity at high temperatures. If the vehicle is run at high speeds or with a heavy load, an oil with a higher viscosity (higher value) may be more appropriate.
Is synthetic oil required for a Toyota Corolla?
Only Solution. Only Toyota cars (apart from 3UR-FBE Engines*) that require 0w-20 synthetic oil have been given the go-ahead for longer oil change intervals of 10,000 miles or 12 months. (You should, though, keep checking the oil level frequently and topping off as necessary.
Can I replace the 5W-20 in my Toyota with the 5W-30?
It is generally not advised to substitute 5w30 oil (or any other oil weight) for 5w20 oil because even a small viscosity change has the potential to harm your engine.
Because your engine was developed with 5w20 oil in mind when it was constructed, all of the parts that come into contact with it must be a specified viscosity after the engine hits operational temperature, or 212.
5w20 oil will have a lower viscosity than 5w30 oil at this temperature; it will flow more easily and with less resistance. When 5w30 is used in place of 5w20, the engine will experience increased oil resistance once it reaches working temperature, which the engine is not built to manage.
If you substitute 5w30 oil for 5w20 when doing so is not advised or authorized by the owners handbook, it could violate your car’s powertrain warranty, impair engine performance, and ultimately harm your engine.
Using the proper oil keeps your engine operating at its best.
use Jerry to be sure you maintain it covered with the appropriate insurance policy. As the leading broker and comparison app for auto insurance in the country, Jerry makes it simple to locate and compare affordable quotes, helping users save $887 annually on their auto insurance.
What is the purpose of 0W-20 oil?
The innovative full synthetic motor oil Mobil 1TM 0W-20 is made to help keep your engine running like new and safeguard crucial engine components for up to 10,000 miles between oil changes* while also providing superior engine protection and improved fuel economy benefits. The performance of Mobil 1 0W-20 is superior to that of our traditional and synthetic blend oils, and it meets or surpasses the strictest industry standards. Many different cars, including some high-performance ones, come with Mobil 1TM synthetic motor oil technology as standard equipment.
Toyota uses 100% synthetic, right?
There is a lot of discussion regarding whether synthetic oil is preferable to conventional oil, and we are here to settle the topic. All of your queries about synthetic versus traditional oil and whether synthetic oil is safe for your Toyota car will be addressed. Whether you drive a Toyota Tundra pickup truck or a Toyota Prius hybrid, we have the answers you need when it comes to using synthetic or traditional oil in your car.
What is the Difference Between Synthetic or Conventional Oil?
Crude oil is refined to become conventional oil, allowing for the presence of natural contaminants in the final product. On the other hand, synthetic oil is produced in a lab and still refines crude oil or, in certain circumstances, natural gas, but the refining method is different. Both natural and synthetic oils are heated and chilled to remove impurities, with the exception of the synthetic oil, which is further purified and reduced to its fundamental molecules to produce a more homogeneous product with nearly no impurities. The end product is an oil that has been chemically modified to have higher viscosity to prevent oil degradation and better breakdown qualities at high temperatures. The benefits of synthetic oil are clear, but they come at a cost that can be up to four times that of regular oil. The extra cost of switching to synthetic oil may not be worth it for you if you are careful about changing your oil every 3,000 to 5,000 miles, but synthetic oil has another significant benefit over conventional oil: it lasts longer. You can drive between 6,000 and 15,000 miles between oil changes thanks to the viscosity and chemically crafted characteristics of synthetic oil.
For further information on the recommended oil for your specific Toyota vehicle, consult your owner’s manual. Toyota recommends synthetic oil in all of their vehicles and mandates it on some model years. Whether you use synthetic or conventional oil, Toyota advises you to check your oil level frequently and to never go beyond the manufacturer’s suggested mileage for your particular oil. The health of your engine and your Toyota car depends on proper routine maintenance and regular oil changes. At your next oil change, feel free to ask one of the experienced Auto Techs at Cava Toyota if you have any additional questions about synthetic versus conventional oil. To make the process of maintaining your automobile simple and hassle-free for you, you can schedule an oil change or any other of our services online.
Toyota 0W 20 oil is synthetic, right?
Finding the ideal motor oil for your car is more challenging now that there are so many options available. Oil types like OW-20 are currently becoming much more widespread. Why should you use this oil? What is it?
Toyota car owners now favor the new 0W-20 Oil over other types of oils.
The cost of a quart of the pure synthetic 0W-20 oil is approximately $6.36. Although a quart costs quite a bit, it is the best oil you can use in your Toyota.
The use of synthetic oil is spreading. Simply said, it outperforms traditional motor oil in a wider range of driving circumstances and doesn’t degrade as quickly. Toyota advises using it in all of their vehicles, with the exception of select 4Runner/Tacoma and Flex Fuel Tundra/Sequoia models, because it is so well-liked (see: is Synthetic Oil Good or Bad).
Visit your local Toyota dealership soon and ask about this new, lighter oil. These days, it is the ideal option for your Toyota automobile.
Is full synthetic Toyota oil recommended?
There are two sorts of oil in the world, regular and synthetic, apart from different viscosities. Although there is a third variety that combines the first two, you often deal with either one or the other. The best option for your Toyota? What kind of oil is used in your Toyota? We offer all the solutions you require.
Does a Toyota need a specific kind of oil?
At this point, all current Toyota vehicles either require synthetic oil or at least recommend it. You must reference your manual to be certain. However, if you only decide to use synthetic oil, it will be far better for your engine and will simplify everything.
What oil is recommended for a 2010 Toyota Corolla?
You should exercise caution because putting the incorrect type of oil in your car might seriously harm the motor. Synthetic motor oil of the grade 5W-20 is required for the 2010 Toyota Corolla to operate effectively.
Ask the staff member at your nearby auto parts store for advice on the best oil for your automobile if you have any extra queries regarding motor oil brands and grades. Most staff members will be pleased to assist you in finding the proper oil for your vehicle so you may keep on driving safely.
Check out the Jerry app to discover more about your alternatives for auto insurance while you’re learning about your car’s oil type. For additional information, download the app and respond to a few short questions.
Better oil to use: 5W-20 or 5W-30?
The two oils are not superior to or inferior to one another. Your engine needs and the type of vehicle are the determining factors.
You should take into account two things while selecting the ideal multigrade engine oil for your vehicle:
- The temperature that your automobile usually operates at (whether you drive in colder temperature or hotter climates)
- The recommended oil viscosity grade for your engine
Even though certain automobiles do provide some variation in engine oil choices, the majority have a suggested viscosity grade. This is due to the fact that engines are built to run on a particular oil viscosity, and changing that could have an impact on the performance of your engine.
Ideally, 5W 30 oil is ideal for drivers who frequent more extreme weather conditions. Compared to 5W-20 oil, it has a higher viscosity index and a wider operating temperature range. In both colder and hotter climes, 5W 30 oil will provide better protection.
For people who reside in colder climates with low temperatures, 5W-20 oil is recommended. It is suitable for light-duty applications and engines with moderate temperature ranges. In cooler conditions, 5W-20 oil offers good start-up performance.
Note: An oil with a high mileage rating may be required for older vehicles (5W-20 or 5W-30). In this instance, the high mileage oil provides the engine with superior friction and engine drag protection at high temperatures.
What happens if I fill my automobile with the incorrect oil?
Inadequate lubrication, overheating, and possibly transmission failure can result from using the incorrect fluid. Even after flushing the transmission, a mechanic might not be able to undo the damage. Your transmission might also be ruined if you accidentally add motor oil or brake fluid.
What would happen if I substituted 5W-30 for 5W20?
Yes. Using an oil with a greater viscosity, like 5w30, won’t cause short-term damage to your engine. To create uniform criteria for achieving realistic fuel efficiency and engine operating conditions, automakers collaborate closely with industry oil specialists like the SAE. These guidelines enable automakers to use particular oil grades and viscosities to achieve MPG and engine life objectives. The SAE claims that using low viscosity engine oil to increase fuel efficiency not only reduces frictional loss of the engine oil seal but also has no performance flaws.
Even though there are few practical differences between 5w30 and 5w20 in terms of fuel economy and engine wear, utilizing the recommended oil grade could void your powertrain warranty if the manufacturer. However, if your warranty is no longer valid, you can use any oil without any problems.
While using a thicker oil, such as 5w30, won’t cause your engine any short-term harm. It is advised that you, whenever feasible, abide by manufacturer recommendations.
How frequently should 0W-20 oil be replaced?
The manufacturer has approved an oil change interval of 10,000 miles or 12 months for Toyota vehicles that utilize 0w-20 synthetic oil. When using this type of oil, vehicle owners should periodically check the engine’s oil level and top it off as necessary. This will enhance the effectiveness of the synthetic oil. The 10,000-mile oil change interval has NOT been approved by Toyota if you operate a Toyota Tundra or Toyota Sequoia that is fitted with a flex fuel-compatible engine.
Some engines may safely run on 0w-20 synthetic oil despite being tuned to run on 5w-20 mineral oil. Even if synthetic oil is used, these engines will still require the 5,000-mile/six-month oil change period.