There are two unique models of the Toyota Tundra for 2008. Toyota offers a 5.7L V8 engine and a 4 L V6 engine as options. They each may use up to 7.4 gallons and 5.5 quarts of oil. Toyota advises using a totally synthetic oil; for optimum performance and longevity, the sae 5w-30 and 0w-20 are the recommended lubricants. Oil should be changed approximately every 5,000 miles, though this can vary based on use. Any auto shop can simply perform an oil and filter change for an average cost of $150. If you’re knowledgeable about cars, you can buy the oils from Wal-Mart or Autozone and complete the procedure at home!
Toyota Genuine Motor Oil or a product equal to the 5W-30 is advised for use in the 4.0L V6 (1GRFE) and 4.7L V8 (2UZFE) engines of the 2008 Toyota Tundra. For the 5.7L V8 (3URFE) engine in the 2008 Toyota Tundra, SAE 5W20 or 0W20 is advised. The 2008 Toyota Tundra’s 4.0L V6 (1GRFE) engine can hold 5.5 US quarts of oil (5.2 Liters). The 2008 Toyota Tundra’s 4.7L V8 (2UZFE) engine can hold 6.6 US quarts of oil (6.2 Liters). The 2008 Toyota Tundra’s 7.7L V8 (3URFE) engine can hold 7.4 US quarts of oil (7.0 Liters).
In This Article...
What type of oil will fit a 5.7 tundra?
All of Toyota’s vehicles are advised to use a certain brand of oil. The Toyota Genuine Motor Oil is the name of this brand, which is produced by Mobil. The most popular weights in this brand for engines using synthetic oil are 0w-20, 5w-30, 10w-30, and 5w-20.
According to the Toyota owner’s manual, SAE 0w-20 is the ideal weight for the Toyota Tundra and should be used in that vehicle. You can use SAE 5w-20 if this isn’t available, though. At the subsequent oil change, make sure to change it back to the 0w-20 weight.
Your Tundra’s age, how many miles you’ve driven it, and the temperature where you drive will all affect how much oil you consume.
How much oil does a Toyota Tundra from 2008 consume?
The oil capacity of your 2008 Toyota Tundra relies on the engine it has. The oil volume with a filter for the 2008 Toyota Tundra is as follows, based on engine types: 4.8 quarts, 4.0L 6-cylinder, engine code 1GR-FE Z. 4.7L 8-cylinder, 2UZ-FE 9 engine code, 6.6 quarts.
What sort of oil is recommended for my Toyota Tundra?
It’s a great way to save money and keep your Tundra running smoothly to perform your own oil changes. Fully synthetic 0W-20 motor oil is the recommended oil type for Toyota Tundras.
Synthetic oils have less contaminants and are better for your engine than normal oils because they contain chemical ingredients that were made artificially. You should use 0W-20 synthetic motor oil, which is designed to keep your engine running at all temperatures.
It makes financial sense to handle routine maintenance on your own. Another is to purchase new auto insurance and download the Jerry app!
Jerry will never make you fill out a ton of pointless paperwork or endure hours of hold time for a faceless customer service agent. Simply download the Jerry app, select your policy, and respond to a few questions. When drivers switch to Jerry, they typically save more than $800 annually.
What makes 0W-20 and 5W-20 different from one another?
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
0W-20 oil: is it synthetic?
High quality base oils and potent additives are required to manufacture a 0W-20. At very low temperatures, the basic oils must still be able to protect and flow. For the oil to flow smoothly at these low temperatures, a lot of synthetic oil is typically required. 0W-20 motor oils are either fully synthetic or partially synthetic (synthetic blend) and need synthetic base oils; they are not conventional (or mineral) motor oils. And the additives must be light enough to move easily while still guarding these more modern, sophisticated motors.
How is the oil changed in a Toyota Tundra from 2008?
No parts are mentioned.
- Step 1: Take the skid plate off. Locate the skid plate first.
- Step 2: Continued Removal of the Skid Plate
- 3. Open the system.
- Draining the Oil in Step 4.
- Reattaching the Oil Drain Plug in Step 5.
- Remove the oil filter cap in step six.
- 7. Draining the oil filter.
- Step 8: Replace the oil filter after removing it.
Does my Toyota Tundra require synthetic oil?
They do not have any issues with synthetic, but they do not advise it for the majority of people (which is exactly what I say to anyone who asks me). Conclusion: Save money and use ordinary oil unless you plan to put your new 2007 Toyota Tundra (and the oil in it) to harsh circumstances.
What is engine oil 0W-20?
In colder temperatures, 0W-20 motor oil flows as freely as 0 Weight oil, but once the engine reaches operating temperature, it behaves more like 20 Weight oil. This guarantees that oil will begin to flow through the engine right away, lubricating important engine components even in cold weather.
The ‘W’ in viscosity descriptions does not, contrary to popular belief, stand for weight. In actuality, it represents Winter. This means that synthetic 0W-20 oil performs as a 0 Weight oil in cold areas but becomes as thick and viscous as a 20 Weight oil once the typical engine temperature has been attained.
Castrol EDGE, a cutting-edge full synthetic 0W-20 motor oil, is part of the company’s line of low viscosity 0W-20 lubricants. It is our toughest oil and is made to endure high temperatures and pressure. For those who want to push their car to the limit, it’s the perfect choice. Full synthetic 0W-20 motor oil liquid Castrol GTX MAGNATEC is designed with protective, clever ingredients that offer outstanding wear prevention.
What type of oil does Toyota use?
For brand-new vehicles, Toyota suggests using Toyota Genuine SAE 0W-20 Full-Synthetic motor oil. Older models might need Toyota Genuine 5W-30 motor oil; if in doubt, check with one of our service consultants or the owner’s manual.
Describe SAE 5w30.
A popular motor oil for light-duty gasoline and diesel engines is 5w30. 5w30 is a multi-grade oil, like the majority of modern motor oils, ranging from a lower viscosity grade of 5 to a higher viscosity grade of 30.
The “W” stands for “winter; the number before it denotes the thickness or viscosity of the oil at low temperatures (thus the “W”); the number following it denotes the thickness or viscosity of the oil at higher temperatures, when the engine is operating.
Can 5W-30 oil be used in a Toyota Camry?
The Toyota Camry 2020 requires 0W-20 synthetic motor oil. Toyota sells an additive at Toyota dealerships that is applied to their OEM oil. However, any ILSAC-certified 0W-20 synthetic oil will function. If 0W-20 synthetic oil is not available, 5W-30 mineral oil will function in its place. At the subsequent oil change, it must be replaced with 0W-20 synthetic oil.
How often should I change the oil in my Camry?
The owner’s manual for your Camry contains a list of the precise service intervals. However, the interval for the most majority of synthetic oil situations is every 10,000 miles or 12 months*. The interval for older Camry vehicles that utilize 5W-30 mineral oil is 5,000 miles/6 months. Even in vehicles with a 10,000-mile/12-month oil change interval, other maintenance like tire rotation and fluid adjustments still needs to be done every 5,000 miles/6 months.
*According to Toyota standards, this period is reduced to 5,000 miles/6 months if you frequently make short excursions (i.e., only in cities) in below-freezing conditions or with heavy idling.
Using synthetic oil in a 2008 Toyota Corolla is possible.
The 2008 Toyota Corolla 1.8L’s increased oil change intervals call for the use of AMSOIL OE Synthetic Motor Oil. Longer than the conventional 3,000-mile oil change interval, it includes innovative synthetic technology that resists chemical breakdown for ultimate wear protection for your car.
What occurs if 5W20 is used in place of 0W-20?
One of the low-temperature grades added to the SAE J300 EOVC system after 1952 is 0W20 motor oil (0W20 oil). It is a liquid designed to behave as an SAE 20 once the engine reaches its operating temperature but flow as easily as an SAE 0 in subzero conditions.
Even at -35C/-31F, this type of oil will still start to flow through the engine’s oil channels. This oil lubricates important engine components, making it simpler for you to start your engine cold in the winter.
W20 vs 5W20 Fuel Economy
Another low-temperature grade often advised for winter use is 5W20 motor oil, with 10W-30 serving as an option for higher temperatures. Because it offers the best fuel economy, reduces fuel consumption, and produces fewer exhaust pollutants, this oil type is widely used. Motor companies and governments all around the world, led by those in Japan, Europe, and the US, are looking for 5W20.
Low viscosity, high-quality synthetic grades 0W20 and 5W20 can both significantly improve fuel economy. When employed in fair-weather temperatures, their attributes are identical. When utilized in cold temperatures, there is little to no difference between the two variants.
Is it acceptable to substitute 0W20 for 5W-30?
No, you shouldn’t use a thinner SAE grade or a thicker oil for a suggested thinner oil vis-grade if your owner’s handbook calls for a thicker oil. The performance of your car’s engine will be protected and maintained if you use the right viscosity motor oil. Thus, while your vehicle is still covered by its manufacturer’s guarantee, always follow their advice.
**If your vehicle calls for 0W-20, avoid using 5W-30 in the rear. The vis-grade number and grade must match.