Advanced Full Synthetic Motor Oil, 5 Quart, Mobil 1 (Part No. 44899)
In This Article...
Toyota Highlanders need synthetic oil, right?
Oil is essential for maintaining a clean, cool engine in any car, including the Toyota Highlander. Your engine’s moving parts are lubricated, which helps to stop wear and tear.
The oil in your car is thick and cold when you first start it. As the engine warms up, the oil thins and flows more swiftly. This makes it possible for it to more efficiently lubricate the engine parts.
Toyota advises using full synthetic oil in the Highlander for maximum performance and engine protection. But which viscosity should you pick?
For newer Toyota Highlander models, Toyota Genuine full synthetic 0w-20 oil is the best option. However, it is advisable to choose complete synthetic 5w-30 oil if you have an older model with higher mileage.
Depending on the year and mileage, a Toyota repair may occasionally suggest using a complete synthetic 5w-20.
Full synthetic oil will not only guarantee that your engine is operating at peak efficiency, but it will also allow you to travel 7,50010,000 miles between oil changes.
The normal oil can still be used, but you will need to change it every 3,500 to 5,000 miles. Additionally, synthetic oil and your engine won’t be protected by conventional oil if you drive a lot.
For more information on the recommended oil for your specific Highlander model, be sure to consult your owner’s manual or with a Toyota-certified repair. Your car can need a different type of oil depending on its year and mileage.
What kind of oil does Toyota suggest?
For brand-new vehicles, Toyota suggests using Toyota Genuine SAE 0W-20 Full-Synthetic motor oil. Older models might need Toyota Genuine 5W-30 motor oil; if in doubt, check with one of our service consultants or the owner’s manual.
Is full synthetic Toyota oil recommended?
There are two sorts of oil in the world, regular and synthetic, apart from different viscosities. Although there is a third variety that combines the first two, you often deal with either one or the other. The best option for your Toyota? What kind of oil is used in your Toyota? We offer all the solutions you require.
Does a Toyota need a specific kind of oil?
At this point, all current Toyota vehicles either require synthetic oil or at least recommend it. You must reference your manual to be certain. However, if you only decide to use synthetic oil, it will be far better for your engine and will simplify everything.
How frequently should a Toyota Highlander have its synthetic oil changed?
Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. For traditional oil, Toyota suggests changing your 2020 Toyota Highlander’s oil and filter every 3,000 to 5,000 miles.
Toyota uses synthetic oil for what reason?
In addition to preventing corrosion and lumping, the ideal mixture of Toyota Synthetic and Mobil 1 Synthetic Motor Oil functions smoothly in both low and high temperatures. Every six months or 10,000 miles, Toyota advises having factory-trained technicians perform an oil change (whichever comes first).
What Are the Benefits of Synthetic Oil?
It mostly depends on the model you purchase, how the engine was made, and what is advised in the owner’s manual whether your new Toyota utilizes synthetic or traditional oil. There are advantages and disadvantages to using each type of oil, but here are a few of the advantages of synthetic oil. Before using synthetic oil, make sure to verify with the Toyota service center in your area.
- Better Performance at Low Temperatures
- Enhanced Protection for Performance and Turbocharged Parts
- increased protection against engine wear
- Enhanced Protection at Higher Temperatures
- Synthetic Oil Maintains Cleaner Engines
How Often Should You Change Synthetic Oil?
To guarantee best performance, standard oil change intervals are commonly set as 5,000 miles or 6 months. That period is increased to 10,000 miles or 12 months on Toyota cars that are required to use 0W-20 synthetic oil. Within that time frame, you should still periodically check and top off the oil level. For other models, synthetic oil is an option, and regardless of the type of oil you choose to use in those models, it is advised that you stick to the 5,000-mile/6-month intervals.
What makes 0W-20 and 5W-20 different from one another?
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
Definition of 5w20 Vs. 5w30
The engine oil type 5w20 is distinguished by its oil weight of 20 in warm weather and a winter grade of 5. It has a lower viscosity than 5w30. While 5w30 has the same viscosity rating of 5 in the winter, it has an oil weight of 30 in the summer, making it thicker.
Working conditions for 5w20 Vs. 5w30
For use in cooler climates, use 5w20. As it moves swiftly and smoothly to deeper engine components with less friction, it makes it possible for a vehicle’s engine to start up rapidly. It immediately lubricates the components. In contrast, 5w30 performs well in warm environments. Unlike 5w20, it does not thin out quickly when exposed to heat. The engine components are therefore better protected overall when using 5w30 at operational temperatures.
Performance of 5w20 Vs. 5w30
These two engine oils function well in the environments for which they were created. Due to its low viscosity and reduced friction in the engine parts, 5w20 is a champion in colder regions with speedier engine starts. In hotter regions where a thick oil is required to resist the higher temperatures, 5w30 excels. Naturally, the engine will heat up more, necessitating a thicker oil. In colder climates, 5w20 is associated with higher performance and fuel economy, whereas 5w30 is associated with better overall engine component protection.
What is engine oil 0W-20?
In colder temperatures, 0W-20 motor oil flows as freely as 0 Weight oil, but once the engine reaches operating temperature, it behaves more like 20 Weight oil. This guarantees that oil will begin to flow through the engine right away, lubricating important engine components even in cold weather.
The ‘W’ in viscosity descriptions does not, contrary to popular belief, stand for weight. In actuality, it represents Winter. This means that synthetic 0W-20 oil performs as a 0 Weight oil in cold areas but becomes as thick and viscous as a 20 Weight oil once the typical engine temperature has been attained.
Castrol EDGE, a cutting-edge full synthetic 0W-20 motor oil, is part of the company’s line of low viscosity 0W-20 lubricants. It is our toughest oil and is made to endure high temperatures and pressure. For those who want to push their car to the limit, it’s the perfect choice. Full synthetic 0W-20 motor oil liquid Castrol GTX MAGNATEC is designed with protective, clever ingredients that offer outstanding wear prevention.
What does the Toyota Highlander’s maintenance required light mean?
According to the distance travelled on the vehicle’s maintenance plan, the maintenance required light alerts you that repair is necessary. Read More: Advice and Techniques. Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds.
On a Toyota Highlander, how do you turn off the check engine light?
If the problem or code that caused your Toyota Highlander’s check engine light to come on is resolved, it will typically turn off by itself. For instance, if a loose gas cap was the reason your check engine light came on, the light will automatically switch off once the gas cap is tightened.
How can the VSC light on a 2007 Toyota Highlander be reset?
Vehicle Stability Control, or VSC as it is commonly known, is the stability control system used in Toyota automobiles. By lowering or eliminating the power provided to your wheels, stability control aids in the maintenance of traction and control in your vehicle. By automatically providing brake pressure to up to three wheels, it achieves this. The system’s main objective is to keep your car traveling in the direction of its wheels. Since 2012, at least in the USA, it has become a necessary safety requirement. Naturally, VSC OFF denotes that your Toyota’s stability control is turned off.
VSC Light Easy Fix
Depending on the model year of the Toyota, a button with the same icon as the light in your gauges will be located either next to your shifter or next to your steering wheel. When you’ve found it:
- Ensure that you have come to a complete stop. If you can, put the car in park.
- For a few seconds, hold down the VSC button.
- The indicator lights for TRAC OFF and VSC OFF will turn on. Now both systems are off.
- Once more, press the VSC button. As soon as both lights go out, the systems are back in operation.
If the VSC OFF light is still on, there can be a glitch in your car’s computer or a problem with the VSC system. Bring your car to a Toyota service location near you so a qualified technician can check the codes and identify the problem. Although it is safe to drive your Toyota even with the VSC OFF light on, we advise caution, especially in bad weather.
In Need of Repair?
Bring your car to the Toyota of Arlington servicing facility if you live close to Chicago and need repairs. We can install OEM parts for you because we have access to them. Get a free estimate from our outstanding collision facility if you need body work.
Which brand of synthetic oil is the best?
Best Synthetic Motor Oils: A Ranking
- Extended Performance Synthetic Motor Oil from Mobil 1. Our preferred choice is this for a variety of reasons.
- High-Performance Synthetic Motor Oil in Royal Purple.
- Full synthetic diesel engine oil from Shell.
- Full synthetic Pennzoil Ultra Platinum motor oil
- MaxLife High Mileage Motor Oil from Valvoline.
Toyota 0W 20 oil is synthetic, right?
Finding the ideal motor oil for your car is more challenging now that there are so many options available. Oil types like OW-20 are currently becoming much more widespread. Why should you use this oil? What is it?
Toyota car owners now favor the new 0W-20 Oil over other types of oils.
The cost of a quart of the pure synthetic 0W-20 oil is approximately $6.36. Although a quart costs quite a bit, it is the best oil you can use in your Toyota.
The use of synthetic oil is spreading. Simply said, it outperforms traditional motor oil in a wider range of driving circumstances and doesn’t degrade as quickly. Toyota advises using it in all of their vehicles, with the exception of select 4Runner/Tacoma and Flex Fuel Tundra/Sequoia models, because it is so well-liked (see: is Synthetic Oil Good or Bad).
Visit your local Toyota dealership soon and ask about this new, lighter oil. These days, it is the ideal option for your Toyota automobile.