The 2004 Toyota Highlander’s 2.4l inline-4 base engine requires 4 quarts of 5w30 synthetic oil. The same viscosity is used in 5 quarts by the 3.3l V6 engine in the 2004 Highlander. Performance benefits of synthetic oil are enormous. Because of the decreased amounts of friction, it safeguards the engine. A switch between synthetic and regular oils won’t harm an engine in any way. Oil that is both synthetic and conventional is used to form synthetic blends. Every 7,500 miles or once a year, whichever comes first, it is advised to change your oil. Regular oil and filter changes aid in clearing the engine of debris and sludge. Your car’s engine will start to have a lot of issues if the oil isn’t replaced.
The 2004 Toyota Highlander’s 2.4L inline-4 basic engine requires 4 quarts of 5W30 synthetic oil, while the vehicle’s 3.3L V6 optional engine requires 5 quarts of the same viscosity.
In This Article...
How frequently should a 2004 Toyota Highlander have its oil changed?
One of the most essential and fundamental maintenance for your car is an oil change. For traditional oil, Toyota suggests changing your Toyota Highlander’s oil and filter every 3,000 to 5,000 miles. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles.
A Toyota Highlander: Does it require synthetic oil?
Oil is essential for maintaining a clean, cool engine in any car, including the Toyota Highlander. Your engine’s moving parts are lubricated, which helps to stop wear and tear.
The oil in your car is thick and cold when you first start it. As the engine warms up, the oil thins and flows more swiftly. This makes it possible for it to more efficiently lubricate the engine parts.
Toyota advises using full synthetic oil in the Highlander for maximum performance and engine protection. But which viscosity should you pick?
For newer Toyota Highlander models, Toyota Genuine full synthetic 0w-20 oil is the best option. However, it is advisable to choose complete synthetic 5w-30 oil if you have an older model with higher mileage.
Depending on the year and mileage, a Toyota repair may occasionally suggest using a complete synthetic 5w-20.
Full synthetic oil will not only guarantee that your engine is operating at peak efficiency, but it will also allow you to travel 7,50010,000 miles between oil changes.
The normal oil can still be used, but you will need to change it every 3,500 to 5,000 miles. Additionally, synthetic oil and your engine won’t be protected by conventional oil if you drive a lot.
For more information on the recommended oil for your specific Highlander model, be sure to consult your owner’s manual or with a Toyota-certified repair. Your car can need a different type of oil depending on its year and mileage.
Does my Toyota require synthetic oil?
There are two sorts of oil in the world, regular and synthetic, apart from different viscosities. Although there is a third variety that combines the first two, you often deal with either one or the other. The best option for your Toyota? What kind of oil is used in your Toyota? We offer all the solutions you require.
Does a Toyota need a specific kind of oil?
At this point, all current Toyota vehicles either require synthetic oil or at least recommend it. You must reference your manual to be certain. However, if you only decide to use synthetic oil, it will be far better for your engine and will simplify everything.
What is the purpose of 5W-30 motor oil?
Generally speaking, 5W-30 motor oil is a winter viscosity grade. Although it functions satisfactorily at greater temperatures, its best application is for drivers in colder climates.
It is often advised for petrol vehicles or a light-duty diesel engine because of its lower viscosity. In addition to these uses, 5W-30 multigrade oil is also employed for the following things:
- Since it is less prone to thermal breakdown, it is better for drivers who frequently experience temperature fluctuations.
- Some individuals might switch to this oil in the winter because it offers superior engine protection and aids in removing engine deposits in lower temperatures.
- For low-duty application in light vehicles and passenger cars
- For engines not operating under excessive pressure
Let’s look at some of the most frequently asked questions regarding 5W-30 motor oil now that we understand what it is used for.
Describe SAE 5W-30.
A popular motor oil for light-duty gasoline and diesel engines is 5w30. 5w30 is a multi-grade oil, like the majority of modern motor oils, ranging from a lower viscosity grade of 5 to a higher viscosity grade of 30.
The “W” stands for “winter; the number before it denotes the thickness or viscosity of the oil at low temperatures (thus the “W”); the number following it denotes the thickness or viscosity of the oil at higher temperatures, when the engine is operating.
Toyota uses what kind of synthetic oil?
Toyota suggests the following synthetic oil:
- The 5,000-mile service period is still present for vehicles with 10,000-mile oil change intervals. The customary 5,000-mile maintenance procedures, such as tire rotation, will still be necessary, and this is also the time to check and adjust the fluid levels, such as brake fluid.
- Even if 0w-20 oil is used, vehicles that can utilize 5w-20 mineral oil (or 5w-30) will still need their oil changed every 5,000 miles or six months.
- Regardless of the type of oil used, the engine oil must be changed every 5,000 miles if the vehicle operation satisfies the standard criteria for “Special Operating Conditions” such as driving off-road, on dirt roads, towing a trailer, making frequent short trips below 32F, or engaging in extensive idling.
- Only Toyota vehicles (except from the 2TR-FE & 3UR-FBE Engines*) that require 0w-20 synthetic oil have been given the go-ahead for longer oil change intervals of 10,000 miles or 12 months. (You should, though, keep checking the oil level frequently and topping off as necessary. This will enable your engine to benefit fully from synthetic oil.)
*The only exceptions to this new change interval program are the 3UR-FBE (Flex Fuel Tundra / Sequoia) and the 2TR-FE (4Runner / Tacoma), both of which have not yet received approval for the 10,000-mile interval. These vehicles still need an oil change every 5,000 miles or six months. Additionally, when running on E85, the Flex Fuel 3UR-FBE needs to be driven every 2,500 miles.
To summarize, there are gray areas in the choice to utilize synthetic. Prior to making this decision, you should take the time to read and comprehend it.
How long is the lifespan of synthetic oil?
Synthetic oil has evolved since it was first developed in 1929, going from powering warplanes to everyday cars. In the last three years, the shift to synthetics has been most noticeable, with more than two-thirds of new cars requiring full or blended synthetic oil. Finding out how long synthetic oil lasts has become more crucial as a result of this influx.
How long does synthetic oil remain effective? The typical lifespan of synthetic oil is 6 to 12 months, or 7,500 to 10,000 miles, before it needs to be replaced. This is merely a rough estimate, and it could vary depending on the type of oil you use, how old your car is, and the road conditions.
What Are the Benefits of Synthetic Oil?
It mostly depends on the model you purchase, how the engine was made, and what is advised in the owner’s manual whether your new Toyota utilizes synthetic or traditional oil. There are advantages and disadvantages to using each type of oil, but here are a few of the advantages of synthetic oil. Before using synthetic oil, make sure to verify with the Toyota service center in your area.
- increased protection against engine wear
- Enhanced Protection at Higher Temperatures
- Synthetic Oil Maintains Cleaner Engines
- Better Performance at Low Temperatures
- Enhanced Protection for Performance and Turbocharged Parts
How Often Should You Change Synthetic Oil?
To guarantee best performance, standard oil change intervals are commonly set as 5,000 miles or 6 months. That period is increased to 10,000 miles or 12 months on Toyota cars that are required to use 0W-20 synthetic oil. Within that time frame, you should still periodically check and top off the oil level. For other models, synthetic oil is an option, and regardless of the type of oil you choose to use in those models, it is advised that you stick to the 5,000-mile/6-month intervals.
A 3.5 L Toyota Highlander uses how much oil?
The 2.7L 4-cylinder engine consumes 4.6 quarts of oil, while the 3.5L V6 engine requires 5.8 quarts. Both engine options are available for the 2018 Toyota Highlander.
Keep in mind that synthetic oil is recommended for both of these engines whenever you need to replace the oil!
It can be enjoyable to shop for a new automobile, but it’s not necessarily the best to do the same for your auto insurance. Thank goodness, the Jerry app has made it simpler than ever to compare prices on vehicle insurance.
The Jerry app, a registered broker that provides end-to-end support, compiles reasonable rates, assists you in switching plans, and even assists you in terminating your old policy. Jerry will even assist you in combining your auto and house insurance for the greatest savings!
Toyota 5W-20 oil is it synthetic?
Compared to the most widely used grades, it aids in improving fuel economy and increasing engine efficiency. The actual savings vary depending on the type of vehicle/engine, the weather, the road conditions, and the viscosity of your present motor oil.
- Fast protection and quick starting in cold weather contribute to extending engine life.
Does it matter whether I use synthetic or conventional oil?
Yes, synthetic oil is superior to regular oil for engines. While conventional oil, or mineral oil, can provide enough lubrication, it cannot match the overall engine protection and performance offered by synthetic oils.
When opposed to the less refined base oils used in conventional oils, synthetics use higher grade base oils, making conventional oils:
- easier to oxidize and acidify
- faster to degrade and lose protective properties
- Less stable chemically
In general, full synthetic motor oils outperform traditional and synthetic blend motor oils in terms of engine protection and performance. The sophisticated complete synthetic motor oils from Mobil 1TM are precisely developed with an additive system that offers performance advantages over conventional and synthetic blend oils by:
- preventing oil deterioration
- minimizing wear
- preventing sludge and deposit accumulation
- safeguarding against extreme temperatures
Therefore, all of the chemistry that is developed in a lab has a significant impact on the road.