Vehicle Stability Control, or VSC as it is commonly known, is the stability control system used in Toyota automobiles. By lowering or eliminating the power provided to your wheels, stability control aids in the maintenance of traction and control in your vehicle. By automatically providing brake pressure to up to three wheels, it achieves this. The system’s main objective is to keep your car traveling in the direction of its wheels. Since 2012, at least in the USA, it has become a necessary safety requirement. Naturally, VSC OFF denotes that your Toyota’s stability control is turned off.
In This Article...
VSC Light Easy Fix
Depending on the model year of the Toyota, a button with the same icon as the light in your gauges will be located either next to your shifter or next to your steering wheel. When you’ve found it:
- Ensure that you have come to a complete stop. If you can, put the car in park.
- For a few seconds, hold down the VSC button.
- The indicator lights for TRAC OFF and VSC OFF will turn on. Now both systems are off.
- Once more, press the VSC button. As soon as both lights go out, the systems are back in operation.
If the VSC OFF light is still on, there can be a glitch in your car’s computer or a problem with the VSC system. Bring your car to a Toyota service location near you so a qualified technician can check the codes and identify the problem. Although it is safe to drive your Toyota even with the VSC OFF light on, we advise caution, especially in bad weather.
In Need of Repair?
Bring your car to the Toyota of Arlington servicing facility if you live close to Chicago and need repairs. We can install OEM parts for you because we have access to them. Get a free estimate from our outstanding collision facility if you need body work.
What could activate the VSC light?
There are numerous things that can go wrong because the VSC system is connected with the engine control and the brake control systems to control your car’s traction.
A bad accelerator pedal, faulty throttle body, faulty ABS sensors, or a faulty mass airflow sensor are the most typical reasons of a VSC light.
The quickest way to determine what set off your VSC light is to use a diagnostic scanner to read the issue code memory.
Is it safe to drive while the engine and VSC lights are on?
While driving with a VSC light on is possible, it is not recommended for safety reasons. In the event of a rainfall or slippery conditions, your car won’t have any driving assistance if the VSC light is on since the vehicle stability control system is off.
Although it is possible to drive with the VSC light on, doing so is strongly discouraged. Pay particular attention to your driving and drive with extra caution on curved roads and in bad weather if your VSC must be turned off or is damaged.
What does it cost to repair VSC?
Lexus VSC repairs would cost between $200 and $300. But that depends on what made the light come on. Vsc collaborates with the ABS and other auto parts. Therefore, it is best to find the problem before discussing how much to remedy it.
Why did my check engine and traction control lights illuminate?
A system bulb check is initiated as the ignition key rotates through the phases of Off, Run, and Start. As the car starts and runs, the traction control system light should come on for one to two seconds before going out. If the indicator continues to illuminate, either the traction control system is malfunctioning or the system has been disengaged.
What location does the VSC button have?
To switch off your TRAC, just push and hold the VSC Off button next to your gear shift. Near your speedometer, look for the TRAC OFF indication light. You will also find your VSC Off indication light here. Simply press the button once more to turn the TRAC back on.
Reason #1Faulty Wheel Speed Sensors
If you’ve read our description of the traction control system’s operation. So you should be aware of the reasons why it can malfunction due to a bad wheel speed sensor.
They are in responsible of notifying the system when a loss of traction occurs, therefore if one is malfunctioning, the TCS light will probably come on.
Options For Replacing A Wheel Speed Sensor
You can spend between $135 and $250 to have an expert identify which sensor is defective and repair it. Alternatively, you may replace it yourself for just over $100.
If you choose to do it yourself, an OBD2 scanner can typically identify which wheel is at fault. A $20100 unit should be adequate because you shouldn’t need anything fancy. You can also bring your car to a nearby parts supplier, and they’ll probably read the code without charging you.
Reason #2ABS System Malfunctioning
The functioning components of the TCS and ABS systems frequently overlap. As a result, if your ABS isn’t working properly, the traction control light can come on. You’ll probably notice an ABS light in addition to a TCS light in this situation.
Options For Replacing An ABS Control Module
This problem is most likely the result of either a bad ABS control module or a bad wheel speed sensor. Again, you can identify which is acting strangely by utilizing an OBD2 scanner.
If the problem is the control module, you have two options: have it fixed professionally for roughly $1,000 or do it yourself for about $800.
You can find instructions for changing an ABS control module in the video below, but you should be aware that it is for a 2005 Chevrolet Blazer.
Reason #3TCS Needs Reprogrammed
Your traction control light may just need to be reprogrammed if it repeatedly illuminates when it shouldn’t. Consider it pure coincidence that something happens for no apparent reason.
Options For Reprogramming A Traction Control System
There aren’t many possibilities for doing your own TCS system reprogramming. You will regrettably need to take it to a qualified mechanic if this is the problem.
Fortunately, the actual task shouldn’t take more than an hour. You should budget $100 for the diagnostic price and an additional $50 to $100 for labor.
Why is my Toyota Highlander’s check engine light on?
Toyota Highlander Check Engine Light Flashing Other typical causes of a Check Engine Light include a faulty head gasket, a malfunctioning emissions control component, a problem with the fuel injection system, damaged oxygen sensors, dirty mass airflow sensors, and defective spark plugs, to mention a few.
When the traction control light comes on, can I still drive my car?
While driving with the traction control light on is normally safe, there are several situations where it is not. Your entire braking system could be impacted if the traction control, anti-lock braking system, and red brake warning lights are illuminated.
Can poor alignment cause the traction control light to come on?
The ABS and Traction Control lights may come on if your car needs service or wants to alert you to a problem.
Check VSC: What does that mean?
You might be curious as to what VSC stands for before we discuss what it signifies. VSC, or “Vehicle Stability Control,” is a safety function in your Lexus ES that aids in preventing skidding if you lose traction when driving through Long Beach.
What does the Toyota Highlander’s TRAC OFF signify?
“TRAC OFF” Indicator The TRAC/VSC systems may restrict engine power going to the wheels if the car becomes stuck in fresh snow or mud. In order to liberate the vehicle by rocking it, you might need to turn the system off. Press and release the button fast to turn off the TRAC system.
What does a VSC light that flashes indicate?
You must stop driving the car if the check engine light is flashing. If the engine controller has identified a problem with the engine management system, the check engine light will illuminate steadily. If the defect is likely to harm the catalytic converter, it will flash. The VSC light, which is for the Vehicle Stability Control system, is likely signaling that whatever issue is present, it affects both systems. In other words, you probably only need to do one repair to fix both lights. The warning lights also let you know that the controller has failure codes that can be read by a specialist using the right scanning tools. The diagnosis will be aided by this. If you get in touch with YourMechanic, they’ll send a specialist to your house or place of business to check your car’s controllers for codes and advise you on the best course of action.
How can the traction control on a Toyota Highlander be disabled?
To avoid wheelspin and additional downshifting, the traction control is turned on and off by the TRAC system. Press and release the button fast to turn off the TRAC system. The TRAC OFF signal should activate. To restart the system, press the switch once again.
How much does traction control system repair cost?
Stabilitrak repairs are surprisingly inexpensive for such a complex device.
Stabilitrak repairs typically cost between $80-$200. That’s not terrible for a vehicle repair, especially in light of how intricate some of these components can be.
My traction control light won’t turn off; why?
The traction control system keeps an eye on the car’s steering and stability and activates when it notices a loss of traction. Electronic sensors are used at each of the four wheels to accomplish this, and they convey steering performance and stability in inclement weather conditions to the Powertrain Control Module (PCM). The traction control system prevents the car from sliding by slowing the engine and selecting which wheel to apply braking pressure to. Together, the traction control system and the anti-lock braking system keep the car stable. The computer makes decisions about how to operate the traction control system or the anti-lock braking system to best control the vehicle when necessary using the data it receives from electronic sensors regarding the rotational speed of each wheel, the horizontal motion of the vehicle, and the vertical motion of the vehicle. When the warning indicator light on the dashboard illuminates, there may be a number of problems present, including faulty steering angle sensors, faulty rotational speed sensors, and faulty wheel speed sensors as well as a steering rack issue. The traction control system may occasionally just need to be reprogrammed. To thoroughly analyze your traction control system, I would advise having a specialist from YourMechanic visit your area.