Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.
This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.
To manually reset the system to turn off the light, however, follow these instructions:
When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.
In This Article...
Even though my automobile says maintenance is necessary, can I still drive it?
Second, restarting the counter after changing the oil involves resetting the maintenance required light. As a consequence, you may travel securely on roads and you won’t need to manually count the miles since after 5,000 miles, this light will alert you that it’s time for a fresh oil change.
What causes the maintenance needed light to illuminate?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
How can I turn off the Toyota Prius’s maintenance needed light?
Turn your key to the second position after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a total of 10 seconds. The light ought to flash, potentially beep, and then go off as a result.
Why does my Toyota indicate that maintenance is soon required?
- The ODO display will briefly flash before beginning to display only zeros.
- Now the light will read “MAINT REQD.”
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- If the car is on, turn it off.
- Press and hold the ODO reset / readout button while the engine is off.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
Does the need for maintenance equate to a check engine light?
Some motorists could mistake the check engine light for the service or maintenance necessary light on the instrument cluster. These alert lights are not connected. The service required light simply indicates that the vehicle needs an oil change or other standard maintenance.
How long does a Prius last before needing an oil change?
In general, cars may travel 5,000 to 7,500 miles without having an oil change. Additionally, you can go 10,000 or even 15,000 miles between oil changes if your car uses synthetic oil.
How much time can a Prius run without an oil change?
With synthetic oil, the Toyota Prius, a well-known hybrid vehicle, can often go 10,000 miles (or six months) between oil changes. To be sure you are using the right oil quality and adhering to Toyota’s guidelines for your year and model, always refer to your owner manual.
Consider your car’s motor oil as its vital organ. The engine would stall down and stop functioning without oil. Oil loses viscosity over time, making it ineffective at adequately lubricating engine components. Oil and oil filters should be changed frequently in order to protect the engine of your Prius.
How soon after the repair required light can you drive?
The oil light suddenly came on. You’re clueless as to why. And to make matters worse, you don’t really have a lot of time right now to worry about it.
How long can you drive with this object is in your face, you ponder. wonderful question We’ll respond to it and explain why it could have initially surfaced. Move along!
How Long Can You Drive With Oil Light On?
If the oil light comes on, you should try to get a repair to look at your car as soon as possible. However, keep in mind that a little more driving around won’t harm anything.
Typically, it takes about two weeks or 500 miles of driving before a flashing oil light becomes a serious issue. However, once that happens, things can quickly deteriorate and cause significant mechanical damage. Therefore, attempt to get your car serviced as soon as possible.
There’s Not Enough Oil in the Car
Numerous issues, including blown head gaskets and broken valves, can cause engines to leak oil. Whatever the case, if oil leaks from your car, it will begin to suffer and may eventually sustain catastrophic damage. As a result, the oil light will turn on when there isn’t enough oil in the vehicle.
The Vehicle’s Oil Pressure Is Low
A vehicle needs enough oil pressure to operate at peak performance. However, keep in mind that a number of things (such as an obstructed oil filter, a broken pressure gauge, insufficient engine oil, etc.) could cause the oil pressure to go too low. This will cause the oil light to come on.
The Oil Pressure Sensor is Malfunctioning
The malfunction of your oil pressure sensor may also cause your oil light to come on. Randomly, this happens, usually as a result of normal wear and tear. If the problem is not corrected, your car won’t have enough oil pressure, which will eventually cause more harm.
The Oil Pump Is Bad
A car’s oil pump may eventually fail as a result of wear and tear on the vehicle. The oil light will unquestionably respond to this. The only option at that point would be to replace the pump since if you don’t, your engine would experience increased friction and end its life much earlier than it should.
Is Your Oil Light Still On?
We have a group of expert vehicle repair specialists who will locate the cause of your check engine light before taking steps to fix it.
Are you in need of an oil change since maintenance is necessary?
Always keep in mind that when your car needs maintenance, the maintenance required light will come on. Every 5,000 miles, it typically reminds you to change the oil, replace the filter, and examine the vehicle. Your car is never having a problem when the light comes on.
Is a maintenance light bad?
Not all vehicles on the market have the maintenance required light. It serves only to notify the driver that the car requires routine maintenance after a certain number of kilometres. This can involve spark plug replacement, tire rotation, or oil or fluid changes. When you start the car, this light typically flashes for six seconds around the 4,500-mile mark before going away. The light stays on as long as the car is running if it hits the 5,000-mile mark or more; this should be regarded as the last caution.
Even though the maintenance required light doesn’t always indicate a problem with the car, you should still be concerned if it comes on. Make sure you make an appointment for service by contacting your technician or the dealership.
What does the Toyota Prius’s red triangle represent?
Regular maintenance should be second nature for all car owners, especially since the majority of new automobiles alert us when an oil change is necessary or our tire pressure is low. The “red triangle of doom” on a Toyota Prius, however, resembles the check engine light on conventional combustion engines.
If your hybrid car is having a more significant problem, having the codes scanned and diagnosed is your first course of action. The warning light could be anything as simple as a low oil pressure alert, or it could signal something more.
Common Causes
The most frequent reason for a red triangle of death light on a Prius, according to several owners, is a problem with the battery. P0A80 and P3000 are frequently the codes that appear following a diagnostic.
The battery control system of the Prius is identified by the P300 code. This code indicates a fault with the HV battery’s ECU, albeit the reason of the issue is generally complicated. Your Prius may exhibit any of the following symptoms:
How is the maintenance needed light reset?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
What is a Toyota Prius’ maintenance schedule?
Toyota typically advises owners to make a service visit every 5000 miles or every six months, whichever comes first.
What does a check engine light that is solid yellow indicate?
After a long day at work, you get into your car and look forward to an adventure on the open road. However, as soon as you turn the key in the ignition, a bright yellow check engine light appears on your dash. Be composed. The indicator light serves as a warning, but it doesn’t always signify that something significant is wrong.
What the check lights are communicating to you.
To monitor what is happening inside your car, the onboard diagnostic system interacts with various components of it. A warning indicator light is sent to your dashboard when there is a problem with the electronic control system to let you know there is a problem. Depending on how the light appears on your dashboard, you can determine whether it’s a serious or minor problem.
It’s not usually a significant problem, but the constant yellow light is alerting you to take a look and solve the small problem as soon as you can. The engine of your car is misfiring if the light is flashing, therefore you need to look into the issue right away. If you don’t think it’s safe to drive, you don’t need to stop immediately away. However, you run the risk of damaging the engine of your car if you ignore the bright or flashing light. If your engine light illuminates, we advise performing the actions listed below.
Three steps to take when your engine light is on.
When your engine light comes on, one of the first things you should check is your gas cap. Look to see whether your gas cap is damaged, cracked, or loose. Ensure that your gas cap is tightened if it is not. Replace your gas cap immediately if it is damaged. The fuel must not evaporate, of course.
2. Check for overheating or low oil pressure.
Check your gauges and lights for signs of low oil pressure. If your signal light is flashing, you might need to slow down and stop towing. When something like this happens, you must carefully pull over and quickly dial a tow truck.
3. Make a Time Appointment
Make an appointment with an automotive expert if you thoroughly examined your car but the problem is still unidentified or you are unsure of how to fix it.
Keep your day from being ruined by that unexplained check engine light. To help you identify the issues with your automobile and get you back on the road so you can get on with your adventure, our team of professionals is here.