By following these easy instructions, you can start your Toyota Highlander remotely:
- Your Highlander’s key fob has a LOCK button. Press and hold it twice in the space of two seconds.
- Then, on the key fob, press and hold the LOCK button for three seconds.
- The engine starts, and the turn signal lights flash repeatedly.
- The engine will operate remotely for ten minutes before automatically shutting off.
If you open any door on your Highlander while the engine is running after remote start, the engine will shut off for safety reasons. To turn the ignition on and start your car, a working key must be present within the vehicle.
In This Article...
How do you use a key to start a 2021 Toyota Highlander?
Press the lock button on your key fob three times to remotely start your Toyota. For the first two presses, make sure you push the lock button quickly, and for the third press, hold the button down for around three seconds.
How do you use the physical key on a Toyota Highlander?
I’m sorry to hear that the key gave you trouble. Your Toyota Highlander key fob most likely has a dead battery. But don’t worry! I’m glad to assist you.
Just follow these steps to start a Toyota Highlander without a key:
- The physical key will come out when you press the button firmly.
- You can enter the car by physically opening the doors with the physical key.
- At this point, you might have noticed that the car lacks an ignition key slot.
- However, the car will start without any problems if you take the key fob and put it right on the push-button start as you press it in.
- On the side of the key fob, look for a push button.
When you can, visit a store and purchase a CR2032 battery, which is what practically every key fob, including those for Toyotas, uses.
Did you know that you can save about $900 annually on auto insurance by installing the Jerry app for free in the time it takes to get back into your car?
Jerry assists you in comparing rates from more than 50 leading suppliers in minutes as a licensed broker. Jerry can assist you with purchasing new coverage and even canceling your existing policy when you discover a lower rate for your Toyota Highlander.
How can I use a key to start my Toyota?
Using the Push-Button Start on Your Key Fob To start the engine, simply depress the brake pedal, make sure your key fob is in your pocket, and press the Start/Stop button. When you get at your location, just put your Toyota in Park mode and depress the button to turn the engine off.
Without a key fob, how can I tell if my car has remote starting?
If your car has a remote starter, the owner’s manual will have information about your unique remote starter and how it functions. To see if this feature is present, look in the manual’s index.
Listed below are few well-known automobiles with a factory remote start option:
- ZDX and TLX Acura (2010later)
- Fusion and the Ford Mustang
- Navara Altima
- Honda Accord
- Tribeca, Legacy, and Outback Subaru models (2007later)
- Corvette Camaro
- Accord, Civic, and Insight from Honda
- GM automobiles (2003later)
Check your vehicle’s key fob
If your car has a remote starting, the key fob will include a specific button. Typically, an arrow forming a portion of a circle serves as the remote start symbol, as seen above. But be aware that some automakers may use a different symbol for remote starting.
How does a keyless remote start function?
Once properly configured, remote start is a very user-friendly tool on your end. However, a fairly complex system for remote starting is within the car. You can start and stop your engine with the push of a button thanks to a variety of physical components that operate together.
Your vehicle needs appropriately installed wiring, a bypass module, a control module, and a remote transmitter in order for a remote starter to function. To put it simply, car remote starters imitate the process that is triggered when you turn on the ignition with your key. A remote car starter accomplishes this instead of using a real key in the ignition.
The control module’s connection to your starter mechanisms and ignition switch makes this possible. Using the buttons on your car’s remote transmitter, you can communicate with the control module once the remote-start system is installed.
Once installed, your remote-start control module receives instructions from your remote transmitter using certain radio frequencies. These signals instruct the control module to unlock, lock, remote start, and other things.
To assist users in providing their email addresses, this content was produced and maintained by a third party and imported onto this website. You might be able to discover more details on this and related material at piano.io.
Has the Toyota Smart Key remote starting capability?
The Smart Key fob in your car can be used to start and stop your engine with Toyota’s remote start system. In order to ensure that your car’s interior is at the perfect temperature when you get in and drive to your next location, this feature also lets you turn on the air conditioner, heater, and defroster.
How does remote start work?
In order to remotely start your car:
- To lock every door, press the Lock button on your key fob.
- Two times on the Remote Start button. Each step must be completed in 3 seconds. The vehicle will start after two flashes from the external lights.
Has my vehicle a remote start?
Do you have a remote start for your car? It’s time to learn! Chevy Remote Start is something you have to try to believe. especially if you realize the impact it has on your day-to-day activities. Learn more about Chevy Remote Start’s game-changing features below. You’ll soon start looking for a “Chevrolet dealer nearby.
Remote Start Kit Features
With the help of the Chevy Remote Start app, you can start your car with the touch of a button and even pre-warm or chill the inside. Anti-theft technology and remote keyless entry systems are integrated with Remote Start.
Additionally, you can warm up the engine of your car directly from your phone. This feature enables you to warm up your engine without going outside into the bitter cold to turn it on, which might be crucial in regions with harsher winters. You may reach a level of accessibility and time savings with Chevy Remote Start that is not possible with a conventional manual start.
Finding the Remote Start Button
You must first check at your key fob to see if you have the remote start option. The remote starter button has an arrow-like form.
If your key fob has this button, your car has remote starting capability. Press the button that locks the car once to try remote starting. Your engine will start when you press and hold the remote-start button for at least four seconds.
The climate control and parking lights will turn on as soon as the engine begins. Additionally, the heated/ventilated seats and the rear window defroster may turn on. You must only move out of park after pressing the start button on the dashboard since this function starts the engine but does not switch on the ignition.
Press and hold the button with the curved arrow on it to turn the engine off if you change your mind. Parking lot lights will go out.
What Models Have Remote Start?
To learn which models feature remote starting, speak with your local Chevy dealer. The remote start option for the Chevy Equinox is available for the LT trim level, and it is included with the Premier trim. Model-specific availability varies.
How do you use keys to start a car?
Once you hear the starter motor spinning, turn the key clockwise. When this occurs, it will be obvious because the engine will begin to make noise and the vehicle will begin to tremble. The sound the engine is generating will often sharpen and smooth out after a short period of time. Release your grip on the key at this point to stop the starter motor. Repeat the procedure in case the engine stalls. If not, your efforts were successful.
NOTE: In some more recent vehicles, all you need to do is click a button after inserting the key into the ignition. If so, proceed as directed.
Additionally, the vehicle may have a dead battery or be out of gas if it won’t start or the starter motor doesn’t move at all. If none of these situations apply, a mechanic could be needed for your vehicle.
Why won’t my push-start vehicle start?
Your automobile may have a dead battery if your keyless entry system is functional but your engine won’t start. Check the battery voltage with a voltmeter to make sure that this is the issue. The battery needs more voltage to start the automobile if it has less than 12.4 volts.
Why would my Toyota not start?
Typically, all you need to do to solve an issue is jump start a dead battery (ideally using a jump box or portable battery charger) and let the alternator to recharge the battery for around 30 minutes.
Try Shifting the Shifter
Try to start the engine while keeping your foot on the brake and shifting into neutral. Move it back to park and try it again if that doesn’t work. Electrical contact inside the transmission range selector can occasionally be restored by moving the shifter (also known as the neutral safety switch).
When did the Highlander introduce remote start?
One of the technological amenities that makes some vehicles so great is remote start. Remote start enables you to start your car from the convenience of your home or workplace, even if you live in a very hot or cold climate.
With remote start, the car will start with the push of a few buttons, allowing it to warm up or cool down before you get in. This is especially useful when it’s quite chilly outside because it gives your car time to warm up (without forcing you out into the cold to turn it on).
The key fob houses the remote start for the 2019 Toyota Highlander. Because it lacks a specific button, you must follow some instructions in order to operate it properly. Remember, you won’t have to spend extra for an aftermarket remote since this is included as standard in the 2019 Toyota Highlander.
Do all key fobs come with a starter?
If you spot a button with a clockwise-moving circular arrow, you’ll know it’s there. That is the remote engine start button, though the key fob itself does not have a label for it. For those who are already familiar with this button’s use, it involves hitting the lock button first, then the remote engine start button. No problem, isn’t it? Other key fobs include a button in the same location, but they have a different sequence for remotely starting the engine. The circular arrow emblem on Ford key fobs, for instance, reads “2xother fobs are labeled “X2, which means the samepositioned inside the circle. This informs you that in order to remotely start the car’s engine, you must click the button twice. This button is frequently seen in many key fobs, therefore it’s not really thought of as a hidden feature. However, other car manufacturersmost notably BMWuse modern key fobs without the button. However, this does not imply that these key fobs lack these functionalities merely because there isn’t a circular arrow button to click. By rapidly pressing the “lock button on the key fob, one can remotely start an engine in a new BMW by doing so. You don’t need to get daring and try out this sequence to see if the engine engages after pressing the lock button three times in a single second if your key fob has the circular arrow button. However, if it doesn’t, it won’t harm to try it out and see if it manages to complete the task in some way.