The Blind Spot Monitor is a device that helps the driver ensure their safety when changing lanes by using rear side radar sensors that are mounted on the inner side of the rear bumper on the left and right.
Warning:
Driving safely is entirely the driver’s responsibility. Always drive defensively and pay attention to your surroundings.
A supplemental feature called the Blind Area Monitor warns the driver when a car is in the blind spot of the outside rearview mirrors or is fast closing in from the rear. Do not rely on the Blind Spot Monitor excessively. Over dependence could result in an accident that causes death or serious harm since the function cannot determine if it is safe to change lanes.
The driver must visually confirm their personal safety because the device may not operate properly in some circumstances.
The outside rear view mirror indicator on the detected side will glow when a vehicle is detected in a blind spot of the outside rear view mirrors or coming quickly from behind into a blind zone. The outside rearview mirror indication illuminates if the turn signal lever is moved in the direction of the detected side.
Note:
The outside rearview mirror indication may be challenging to notice in bright sunlight.
In This Article...
How can I activate the blind spot monitor on my Toyota?
The Multi-Information Display in most Toyota automobiles allows users to enable and disable the BSM2 and RCTA3 systems (MID). Toggle the BSM setting on or off by going to the MID’s Settings screen, where it may be found.
On a 2019 Toyota Highlander, how do you activate the blind-spot monitoring feature?
Locate the BMS switch on the dashboard to the left of the steering wheel to activate the Blind Spot Monitoring System (BMS). The BMS button simultaneously activates and deactivates the Blind Spot Monitor and the Rear Cross Traffic Alert System.
Where is the 2018 Toyota Highlander’s BSM button?
Press the BSM button on the dashboard to the left of the steering wheel to enable this cutting-edge safety function. The lights on the side mirrors will briefly turn on once you hear a sound chime. The side mirror light will turn on if a car is in your blind spot while you’re driving. In order to capture your attention and let you know there is a car nearby, if you activate your turn signal at this moment, the light will start to flash.
What does Rear Cross Traffic Alert do?
Rear Cross Traffic Alert, like the Blind Area Monitor, aids in bringing your attention to objects in your blind spot. However, this feature alerts you to any vehicles that may be in your path as you reverse out of a parking space or driveway. It can identify vehicles traveling between 5 and 18 mph from the left or right when you are backing up at a speed of 5 mph or less. When a car is found, the system emits a warning tone and turns on the light in the corresponding side mirror.
DISCLAIMER: Despite the fact that these features can increase safety in a variety of driving circumstances, do NOT rely only on them. The Blind Spot Monitoring tool has functional, detection, and monitoring range restrictions, just like any other piece of technology. Drivers are required to use their turn signal and to look behind them at all times.
Why does Toyota appear on my BSM?
When the system is turned on, the available Blind Spot Monitor (BSM) switch lights up. The exterior rearview mirror on that side of the car flashes if a vehicle is seen in a blind area.
Has the Toyota Highlander had blind spot monitoring?
When a car approaches your Highlander from the blind spot, this technology alerts you. To ensure that moving objects on the back of your Highlander are properly detected, particularly while in reverse mode, Toyota has included a Rear Cross-Traffic Alert feature to the BSM. When the technology detects an obstruction in your way, side mirror indicators will alert you.
Front and Rear Parking Assist with Automatic Braking
This technology also employs audio and visual cues to alert the driver to potential rear-end collisions with any objects. In some circumstances, the PA with AB system operates to automatically apply the brakes if the driver doesn’t pay attention to the warnings.
Available Blind Spot Monitor With Rear Cross-Traffic Alert
The Highlander’s optional Blind Area Monitor (BSM) is made to alert you when a car is in its blind spot on either side. Rear Cross-Traffic Alert (RCTA), a feature offered on Highlander, is made to identify certain vehicles approaching from either side when the vehicle is in reverse. The technology is built to alert you with side mirror indicators and a warning tone if it detects cross traffic.
The operation of the Toyota Blind Spot Monitor.
The Blind Spot Monitor is yet another innovative Toyota safety feature. It like having eyes on both sides and the back of your head. To keep you safe and avoid accidents, this technology employs radar to identify and track vehicles on all sides and warn you when one enters your blind zones. Learn how this technology keeps you safe by allowing you to change lanes on busy freeways or busy city streets at the touch of a button by watching this brief video. In addition to checking your blind spot when you’re driving, the rear cross-traffic warning feature prevents accidents when you’re backing out of a parking space by letting you know if any cars are approaching from either side. Several various Toyota models come equipped with blind spot monitoring? Visit Michael’s Toyota of Bellevue to test drive this technology.
Why doesn’t my blind spot assist function?
To start with, move your vehicle to a clear, open location and restart it. If the error was brought on by driving through dense traffic, close to walls and barriers, or while being exposed to interference from radio stations or other waves that could interfere with these radars, this should fix the problem.
If both of these alternatives are ineffective, move on to the third option below, which is the most common problem causing the blind sport aid to malfunction. The second step is to check blown fuses to make sure they are in functioning condition.
If the issue still exists, turn off your automobile and clean the sensors; this should solve the problem if the mistake was brought on by inaccurate readings due to dirt. Start your car again, then see whether the problem notice still appears.
When cleaning the sensors, look inside the connectors for any signs of moisture or mold. This is important because it is very common for Mercedes-Benz blind spot assist sensors to malfunction because of moisture or water getting inside the connector. This is because the sensors are mounted beneath the rear car’s arch, where they are exposed to water from the wheels.
A lot of customers are complaining that the Mercedes-Benz blind spot assist inoperative warning message has started to appear after a car wash, which indicates that water got on or inside the radar. As a result, you should pay extra attention to the connectors that plug into the sensor and make sure there is absolutely no moisture present.
When testing active blind spot, keep in mind that the system only activates when you are traveling at a speed of more than 20 mph (30 kmh). If your speed is greater than 20 mph, the blind spot system is turned off.
Sweden-based Autoliv ASP Inc. manufactures Mercedes-Benz blind spot radar sensors to guarantee the highest quality original equipment parts and adhere to all legal requirements. Radarsensors are made in Sweden, the United States, or Canada by Autoliv ASP Inc.
A list of vehicles equipped with blind spot radar is shown below, along with a list of part numbers. Another extremely essential aspect of radars is that every time you replace one, you must code it yourself using dealer Xentry software or pay MB specialists to do it for you; otherwise, the radarand other sensors like distronic, collision assist, and many othersmight remain deactivated.
How can I activate BLIS?
Placement of the BLIS lamp
NOTE: Depending on the car model, details may differ from the schematic.
The BLIS button in the function view of the center display is used to activate or deactivate the function.
The function of BLIS is confirmed by the door mirror indicator lamps blinking once when the engine is started.
When the engine is restarted after BLIS has been deactivated, no indicator lights will be illuminated since BLIS will still be deactivated.
How can I disable blind spot assistance?
Instead of taking the role of safe driving habits and the usage of side and rearview mirrors, blind spot assist is a supplement to them. Depending on the pace, weather, and road conditions, the functionality might not work. Use the door mirrors and rear-view mirrors to prevent collisions while driving safely.
The blind spot monitor system has been improved with blind spot assist. The same radar is used on both sides of the car for the blind spot assist feature. When a lane change maneuver is started, the blind spot assist feature assesses the likelihood of a side collision.
The amber warning door mirror car icon flashes in the appropriate door mirror when a lane change maneuver is undertaken while a risk is detected. To counter the lane shift, the steering wheel receives an automated rotating force at the same moment. The applied force suggests that a steering adjustment is necessary to reduce the likelihood of a collision. To change lanes, the rotating force can still be overcome.
The amber warning symbol for the blind spot monitor system illuminates as long as a risk is being recognized.
The instrument panel’s menu system allows you to enable or disable blind spot assistance. Look at the INSTRUMENT PANEL MENU.
When the car’s speed drops to less than 64 km/h, blind spot assistance is turned off (40 mph).
When the car is negotiating a tight radius bend, blind spot assist is disabled.
Blind spot assistance is also deactivated when the blind spot monitor system is turned off. Look at the INSTRUMENT PANEL MENU.
The 2017 Toyota Highlander is equipped with blind-spot monitoring, right?
The Highlander comes with a standard Blind Spot Monitor with Rear Cross Traffic Alert (BSM w/RCTA) on the XLE grade and higher. The 2017 Highlander Limited Platinum grades come standard with a Bird’s Eye View Camera with Perimeter Scan, raising the bar for visibility and safety.
Is blind-spot monitoring available on the 2018 Toyota Highlander?
In Highlander, high-tech safety is everywhere, particularly in terms of visibility. A backup camera is a standard feature on all models. Standard Blind Spot Monitor with Rear Cross Traffic Alert (BSM w/ RCTA) on the XLE grade and higher helps warn drivers of unforeseen threats.