Three minutes are required.
You may learn how to turn off the Maint Reqd or maintenance required light on the vintage Toyota Corolla in this section. This will remain the same from 2003 till 2008 because I’m working on 2008. So, if your Corolla resembles this, the process will be the same. Let’s do it now.
- Start your vehicle
- Set the ODO on your car’s odometer.
Use the ODO/TRIP button to set your odometer to the conventional ODO, which measures the number of miles on the car, rather than the Trip A or Trip odometer.
- Afterward, remove the key.
- Turn the ignition key to the ON position while pressing and holding the ODO/TRIP button.
I’m going to now turn the key back on without starting the engine while holding down the ODO/TRIP button.
In This Article...
Hold the button down.
Following that, you’ll notice that the odometer has few dashes on it before flashing to zero and the Maint Reqd light turning off.
Start the engine after releasing the button.
So, for a 2006 Toyota Corolla, that is how you go. For your information, this operation is for the Toyota Corolla’s ninth generation (2003, 2004, 2005, 2006, 2007, 2008 model years). Therefore, feel free to ask any queries in the comment area. Enjoy your day!
How can the maintenance needed light on a 2008 Toyota Camry be reset?
Instructions for Toyota Camry to reset maintenance light
- Switch to position one after inserting your key into the ignition.
- Turn the key to position two while pressing and holding the odometer button on the dashboard.
- When the maintenance light begins to flash, keep holding the odometer button.
- Pull back on the odometer button, then turn the key.
How can I turn off the message that my Toyota needs maintenance?
Turn your key to the second position after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a total of 10 seconds. The light ought to flash, potentially beep, and then go off as a result. Release the odometer button once it has been turned off, then start the automobile.
On a 2009 Toyota Corolla, how do you turn off the maintenance is needed light?
You must keep up with routine maintenance, but if you do the tire rotations and oil changes yourself, you will need to reset the maintenance light once you have completed the servicing.
- Put the Corolla’s keys in. Activate the lock on the “OFF position; do not start the vehicle.
- the trip reset button next to the odometer is pressed and held until “On the main screen, Trip A may be shown.
- Reverse the key to “OFF.
- Turn the key back to the “on” position while pressing the button to reset the trip “position of ON.
- Hold down the trip reset button until the odometer’s miles section flashes zero. The maintenance light will now stop flashing.
How do I stop the needed maintenance?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
Why is the Toyota Corolla’s maintenance required light on?
Even the smallest elements, like dashboard lights, give each car a unique look. Knowing what each light indicates and what to do when one comes on might be challenging. While some lights are merely warnings, others are critical and must not be disregarded. By addressing the query, “What does it signify when the maintenance light is blinking in my Corolla?,” we hope to assist you better understand your Toyota warning lights.
What does the maintenance required light mean?
Other automakers don’t offer a dashboard light like the maintenance required light, which is present on Toyota automobiles (MAINT REQD). Many new Toyota drivers could mistakenly believe that this light is the check engine light, but it actually represents a completely different warning. According to the distance travelled on the vehicle’s maintenance plan, the maintenance required light alerts you that repair is necessary.
Why does my maintenance light come on after I change the oil?
- Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
- Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
- The ODO display will briefly flash before beginning to display only zeros.
- Now the light will read “MAINT REQD.”
- Press and hold the ODO reset / readout button while the engine is off.
- If the car is on, turn it off.
- Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
What ‘MAINT REQD’ Means
Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.
Need Help?
Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!
On a 2006 Toyota Sienna, how do you turn off the check engine light?
Here are a few techniques for turning off your check engine light:
- Let it develop naturally.
- Alternately turning on and off your ignition multiple times.
- Your battery must be disconnected and reconnected.
- Purchase an OBD II scanner (they’re reasonably priced), and then simply follow the on-screen directions.
On a 2010 Toyota Corolla, how do you turn the maintenance light back on?
Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for around 10 seconds. A buzzer sound and the maintenance light should start to flash. The light ought should thereafter go out.
How can I turn my car’s service light back on?
First, turn on the engine. Step 2: The display will say “Service required” if a service is overdue. Locate and press the OK button at the top right of the steering wheel for longer than one second to clear this message. The service interval will be reset to its default value in Step 3.
Can I drive my automobile even though it needs maintenance?
Simply put, the flashing maintenance required light is alerting you that maintenance on your car is necessary. The indicator will come on when a predetermined period of time has passed since your car’s last service or based on how far you’ve driven it.
This light typically indicates that you should change the oil in your car. The maintenance data will be reset for you when your car has been taken in for service.
To manually reset the system to turn off the light, however, follow these instructions:
When the maintenance light comes on, you can continue to drive, but bear in mind that you are doing so at your own risk if the required or scheduled repair is skipped.
What must I do if my maintenance light illuminates?
How Can the Maintenance Required Light Be Reset?
- Turn on your car. Look at your dashboard when your key is in the on position.
- Press the Trip Meter Reset Button after turning off the engine.
- Re-start the vehicle.
- Keep pressing the reset button.
- Reset button released
What does the phrase “maintenance required” mean?
The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.
The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.
When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.
Why does my Toyota’s maintenance indicator constantly flashing?
Toyota’s maintenance reminder system only serves to remind the motorist to have their car’s oil changed. The engine light will turn on after 5,000 miles of driving since the computer counts the engine’s mileage from the time it was reset. The system does not account for the changes between mild and extreme driving situations, load weight, towing, or weather conditions, all of which are significant factors that affect oil life because it is not algorithm driven, unlike other more sophisticated maintenance reminder systems.
Because of this, people who regularly tow or drive in adverse weather conditions and require more frequent oil changes may find the maintenance light ineffective. However, for individuals who frequently use the motorway in good weather, it might not be practical. This is not to suggest that a driver should completely ignore the maintenance light. Keep an eye on your driving circumstances throughout the year and, if necessary, have a professional assess your unique, most frequent driving conditions to determine whether or not your car need servicing.
The table below can help you estimate how frequently you would need to change the oil in a current car (earlier cars typically require more regular oil changes):
Can I manually reset the check engine light?
You might have requested for assistance with a computer problem if you’ve ever worked in an office setting with an IT department.
Probably the first thing your IT wizard asked was, “Have you tried resetting your computer?”
The analogous repair for a car’s check engine light is the on-off technique. It compels the computer to reboot and restore its previously saved state.
Simply switch the ignition on for 1-2 seconds, then off for 1-2 seconds, using your key. Three or four times through, repeat this step.
If the check engine light is still on after the reset, your car might still be having issues. Think about using the OBD2 scanner to check for the error code or taking your car to a qualified repair.
What is the time it takes for the check engine light to go out?
In the majority of car models, the check engine light will go out after you fix the issue. However, it can take a while. Usually, a car needs 1020 successful resettings before the check engine light goes out on its own.
A cycle is when you start your car from a cold start, drive it until it warms up, and then stop.
After 1020 successful cycles, which, as you can imagine, can take a while, the check engine light will reset itself if you are certain that you have resolved the issue that was the cause of the check engine light. As a result, using an OBD2 scanner to reset the check engine light is much simpler.