It’s a good thing you called even though driving with the airbag light on in your Toyota Camry won’t impair your engine or ability to drive.
Your car’s SRS warning (airbag light) is a way of informing you that it’s time to make an appointment with your mechanic since your airbags might not deploy in the event of a collision or crash.
The SRS warning light on your Toyota Camry may have initially activated for the reasons listed below.
- faulty clock spring in an airbag
- Corroded sensors
- The airbags must be reset.
- faulty or loose wiring
- defective seatbelt
- defective or depleted battery
When your airbag light illuminates, it’s crucial to make an appointment with your repair right away.
Keeping up with frequent maintenance visits is just as crucial as having excellent auto insurance. Finding excellent coverage at a reasonable price has never been simpler thanks to the insurance super app Jerry.
Jerry will gather estimates from dozens of the best insurance providers in only 45 seconds, allowing you to choose the one that best suits your needs. We’ll protect your new insurance and even assist you in terminating your current one. There are no lengthy forms or phone treesjust discounts!
In This Article...
Headlight indicator (U.S.A.)
informs you that the headlights, taillights, instrument panel lights, parking lights, license plate lights, and side marker lights are all on.
Low fuel level warning light
notifies you when the fuel is running low. For more detailed information on how much petrol is left in your Toyota, consult the owner’s manual.
Maintenance required reminder
At our Toyota dealership in Morrow, many of the new Toyota models we have available for sale are equipped with a maintenance-required reminder light to make sure you perform the needed maintenance.
Security indicator
When the ENGINE START STOP switch is turned off in a car equipped with a smart key system, the light flashes to indicate that the system is working. The light will flash on Toyota vehicles without a Smart Key System once the key is taken out of the ignition.
Slip indicator
The slip indicator will light up when your car starts to lose traction and slide. You will be informed that the VSC/TRAC systems are operational via this.
SRS airbag on-off indicator
You can tell if the passenger air bag is on or off by looking at the AIRBAG ON and AIRBAG OFF light, which lights. To properly activate or deactivate the airbag, this device senses the conditions of the front passenger seat.
TRAC OFF Indicator & VSC Off Indicator
informs you whether TRAC and/or VSC have been turned off. TRAC and BSC can reduce engine output to the wheels if your Toyota becomes stuck in fresh snow or mud. When the system is turned off, you might be able to liberate the car by rocking it back and forth. For information on how to disable this function in your individual model, contact our Toyota service team.
Can the airbag light be reset without a tool?
Without a scanner, most automobile models make it difficult to reset the airbag light. This is a safety warning since, when the airbag light appeared, you should always fix the problem. Fortunately, if you fix the issue, the airbag light will typically also turn off by itself in many automobile models.
However, in some older vehicles, the airbag light can be reset without a scanner by disconnecting the battery wires.
Make that there are no loose wires or rust in the connector plugs in the wiring system under the driver’s or passenger’s seat. Restart your car after spraying an electronic cleaner on the connecting plugs.
If you can’t detect any issues there, you should really invest in an OBD2 scanner or have a shop interpret the codes because otherwise you’ll have to guess what the issue is.
How do you deactivate an airbag in a Toyota?
Congratulations on your new Toyota Tacoma! Although airbags are intended to save lives, those whose heights are significantly different from the average may experience more negative effects than positive ones.
Simply follow these easy steps to disable the passenger side airbag in your Toyota Tacoma.
- Open the door on the passenger side.
- Pull out your key fob’s manual key.
- The airbag setting slot is on the side of the dash; insert the key there.
- To activate the airbag, turn the key to the right; to deactivate it, turn the key to the left.
Your passenger-side airbag is instantly turned off! Once you’ve done this, make sure you declare any modifications you’ve made to your Tacoma so that your auto insurance policy will legally cover them. The Jerry app can be useful if you discover that these alterations are not covered or they result in a sharp increase in your premium.
What is the cost of turning the airbag light back on?
Reset Airbag Light, at No. 1 This procedure typically takes several hours and costs a few hundred dollars, though depending on the car, it might cost as much as $600.
When the airbag light is on, can I drive?
The airbag light may have illuminated for any number of reasons, just like other warning lights. Here are a few of the most frequent causes:
The airbag needs resetting
The airbag light will turn on if there has been a collision but it wasn’t serious enough for the airbags to deploy. At your neighborhood garage, the airbag needs to be reset.
Corroded sensors
The sensors in your automobile may have deteriorated if it has water damage. This would lead to a malfunction in the system and turn on the airbag light.
Dislodged wiring
If your car has side airbags, the passenger side airbag may occasionally malfunction. When the passenger seat is shifted back and forth, the wires for that airbag may become damaged or displaced. We caution against attempting to reconnect a detached plug because you risk setting off the airbag. Make an appointment for your car at a nearby garage and ask them to check it.
Faulty seat belt
Your seat belt sensor can be the cause of the problem. The sensor that determines whether or not you have buckled up can malfunction occasionally. When this occurs, the airbag light can start to illuminate.
Your airbag clock spring may need replacing
The spring is intended to preserve continuity between the wiring and the driver’s airbag and coils throughout your steering wheel. The spring may wear out and fail over time, turning on the airbag warning light. Older autos are more likely to have this flaw.
The important line is that you must stop driving as soon as your airbag light illuminates and have your automobile inspected by a repair as soon as possible. Your airbags won’t activate until the issue is identified and remedied. Never disregard your airbag light since your safety and the safety of your passengers are top priorities.
The airbag sensor is where?
A comparable safety sensor is placed inside the vehicle’s passenger area, and the sensor is situated inside the engine. To assess whether the crash intensity exceeds a predetermined threshold and warrants the discharge of an airbag, this safety sensor is necessary.
How do I deactivate my airbag?
If the vehicle has a switch called the Passenger Airbag Cut Off Switch, it can be used to deactivate the passenger airbag (PACOS).
When the passenger door is open, you can access the switch for the passenger airbag on the passenger side of the instrument panel.
ALL FRONT-FACING PASSENGERS (CHILDREN AND ADULTS) CAN SIT SAFELY ON THE PASSENGER SEAT WHEN THE AIRBAG IS ACTIVATED.
Rear-facing child seats are safe for use on the passenger seat when the airbag is switched to OFF.
How can I check the code on my airbag light?
Diagnostic Codes for Airbags The airbag codes consist of two digits. To read the codes, count the flashes the light makes, then count them again after the pause. For instance, two flashes, a pause, and four flashes indicate a code 24 issue with your airbag system.
Can airbags be deactivated?
One of a car’s most crucial safety elements is the airbag. There are circumstances, though, in which you should deactivate the passenger side airbag:
- while a youngster is riding in the front passenger seat in a rear-facing child seat. Rearward-facing child car seats are not permitted in airbag-protected passenger seats. When a rearward-facing baby seat is in position, an airbag activation might seriously harm or possibly kill the kid.
- when a driver has decided that it is safer for the passenger to ride with the passenger-side airbag deactivated due to the passenger’s peculiar medical condition.
- When a seat is vacant, the airbag can also be deactivated.
Behind the front passenger visor, in the majority of cars, there will be a helpful reminder sticker.
The system or steps to disable the passenger airbag vary depending on the model and manufacturer. The manufacturer’s manual must be read because it contains all the instructions.
However, if the vehicle has a Passenger Airbag Cut Off Switch, the passenger airbag can be turned off (PACOS).
To avoid any potential faults, you typically need to turn off the ignition before disabling the airbag.
In a Toyota Camry, how do you activate the airbag?
It’s simple to overlook your car’s airbags until you actually need them, so it makes total sense that you forgot to switch yours back on. Simply follow these procedures to activate the passenger airbag in your Toyota Camry:
- Open the door on the passenger side.
- Find the keyhole on the dashboard’s side.
- To reactivate the airbag, insert your car key into the keyhole and spin it.
Call the Toyota shop in your area for help if you are having difficulties turning your airbag back on. And before you get back on the road, download Jerry to make sure you get the greatest auto insurance at the best price.
Jerry is a free insurance comparison software that checks around for the best deals with more than 50 different insurance providers. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have. Every year, the typical Jerry user saves $879.