Typically, when your ABS light illuminates, it means your anti-lock braking system is experiencing a serious issue. Having saying that, you must always leave your ABS light on when having your brakes inspected by a professional.
To turn off the ABS light in your Toyota, take the following actions if you are certain that your brakes are in good condition:
First, open your hood and use a socket wrench to detach the negative battery cable.
The entire electrical system is reset when the battery is disconnected. If you performed the instructions above, the ABS light should turn off if it is malfunctioning. However, if your brake system is having a problem, it might start up again.
Take a moment to save on auto insurance with Jerry because you’re already spending the effort to learn more about your vehicle. The Jerry app, a registered broker, offers free personalized price comparisons from more than 50 leading companies like Progressive and Allstate. Users save $879 on average year on auto insurance, and signing up only takes a minute.
In This Article...
Why is the Toyota Camry’s ABS light on?
First, the hue of the light that first arrives is something crucial to note. The yellow indicator denotes something that is significant but doesn’t need immediate attention. However, a red sign denotes a situation that demands quick action. It is important to stop and ask for help if a red icon emerges.
- The three letters on the Toyota Camry’s dashboard represent the ABS Warning Light “The acronym for ABS is Anti-lock Braking System. If this light comes on, it means that either the anti-lock braking system or the brake assist system isn’t working properly.
- When the parking brake is applied, the warning light for the brake system will come on. It looks like the word “BRAKE. When the brake is fully released, the light should go out, confirming the system is working properly.
If the brake fluid level is low, this light can also come on while you’re driving. Pull over and get help if this happens.
- The Toyota Camry indication for “ICS OFF” resembles an automobile with a cone and a star behind it. When this light illuminates, a buzzer will sound if there is a problem with the Intelligent Clearance Sonar system.
- Electric Power Steering (EPS) Warning Light: This warning light resembles a steering wheel with a question mark next to it. It implies that the EPS system is malfunctioning.
However, if the buzzer doesn’t go off, the system is not currently available. This might occur when ice or dirt obstruct the sensor.
- SRS airbag technology
- There is a simple remedy for the low fuel level warning light. It indicates that you need to fill up your tank at the closest gas station because you are running low on fuel. This lamp resembles a tiny gas station pump.
- The occupant classification system for front passengers
- The pretensioner system for seatbelts
- This dashboard light, known as the SRS Warning Light, signifies a problem with one or more of the following systems:
- Rear passenger seatbelt reminder lights: This illumination resembles the seatbelts of three seated people. Above each of their heads is the word “REAR.” The backseat passengers are reminded to buckle up by this light. A buzzer could also be present in addition.
- Slip Indicator: If the Camry is at risk of slipping or if any of the drive wheels spin, this dashboard light will flash. The operation of the VSC/TRAC systems is indicated by this light.
- Tire Pressure Warning Light: When this light turns on, it will have an exclamation point in the middle and resemble a horseshoe with tire treads on the bottom. This light suggests that the air pressure in one or more of your tires is low. If this happens, take your car in for tire service.
Why do my Toyota Camry’s traction control and ABS brake lights come on?
When a malfunction, a bad wheel sensor, or other mechanical issues are discovered, the ABS and Traction Control lights will illuminate. When coupled with the primary brake light flashing, these warning lights, which by themselves do not indicate anything serious, may indicate a more serious issue.
Here are a total of 14 causes for the traction control and ABS lights to illuminate:
- ABS module malfunction
- computer problems
- broken fuse
- improper wheel-speed sensor
- reduced tire pressure
- the steering angle sensor is faulty
- brake fluid is low
- incorrect steering rack
- faulty pumps and valves
- erroneous wheel alignment
- sludge and detritus
- battery voltage is low
- Slouch mode
- OFF the traction control
Do not panic if these lights come on while you are driving because your car’s braking system will still function. Just be careful not to cause any wheel slippage by slowing down and applying gentle braking. Having an OBDII scanner on hand is one of the best strategies for handling this circumstance. You could use this to decode codes, locate triggers, and turn off the ABS and TCS lights. But if it is not possible to reset the warning lights, take your car to a professional for a complete diagnosis and repair.
Can the ABS light self-reset?
Only after the ABS controller runs and passes all self-tests will the ABS light automatically reset. It is not necessary to reset it, and it generally cannot be done so.
Can I drive my car with the ABS light on?
You can safely drive your automobile to your destination if just one of your ABS lights illuminates because your regular brakes will still function. Naturally, you will need to exercise greater caution because your ABS won’t function in an emergency. To find the cause(s) of the anti-lock brakes warning light, you should schedule an appointment for your automobile as soon as possible at your neighborhood garage.
However, if the brake warning light and the ABS light are both on at the same time, it indicates a much more serious issue, and you should not keep driving. If this occurs, you should carefully apply the brakes to bring your car to a stable stop while gradually decreasing your speed. Call your breakdown service or a nearby garage to have your vehicle recovered once you’ve stopped in a secure location and turned off your engine.
Make sure to read Dashboard Warning Lights Explained if you have other warning lights on your dashboard and would like to know what they mean.
Why does the ABS light keep coming on?
The standard brakes on your automobile should still function properly, however the antilock system that prevents wheels from locking up while braking will not. Additionally, because traction control and stability control rely on the same wheel-speed sensors as the antilock system, those features will also be disabled if your car has them.
All vehicles made in 2012 and later are obliged to feature traction control, ABS, and stability control. All or some of those features can be found in many vintage vehicles.
Every time you start your automobile, the ABS light (often yellow, amber, or orange) should briefly illuminate as a system check. If the light continues to illuminate, the system has been shut down because something isn’t operating properly.
With ABS, sensors that are put on each wheel track how quickly the wheels are spinning. When braking, if one wheel is rotating more slowly than the others, it means it is locking up, which could lead to skidding and a loss of steering control. In order to prevent further wheel locking, ABS is designed to quickly “pump the brakes at the locking wheel, allowing it to spin so that the driver retains braking and steering control.”
What causes this is as follows:
- a system fuse that has blown
- A malfunctioning ABS controller
- a road grime- or damage-covered wheel-speed sensor
- between the sensors and the ABS controller, a broken wire
An ABS sensor warning light can also be activated when a pump and valve that apply the proper amount of braking fluid pressure to each wheel to prevent locking do so.
If the regular brakes’ red warning light illuminates, your car is likely losing braking fluid or the brakes are so worn that you can’t stop as quickly as usual. Any of such circumstances calls for prompt attention and perhaps repairs.
Q: Is it safe to drive a car with an ABS light on?
Yes, it is secure. Even having the ABS light on, the car brakes will continue to function normally when braking. But in cases of hard braking, the brakes will lock up, causing the wheels to skid. When you apply hard braking on ice during the winter, your ABS system is crucial to prevent your wheels from locking up.
Driving with the ABS light on in the winter is risky since your car won’t be able to withstand emergency severe braking. The safety feature gives you steering control by reducing your stopping distance and safeguarding you from mishaps.
Q: How much does it cost to fix the ABS system?
Ans: If you include the price of an ABS diagnosis and labor fees, it will cost about $200. The estimate, which is location-specific and excludes taxes and fees, is available here.
However, depending on the ABS module component, there may be an additional cost of $200 to 950 if you need to replace the ABS system. Many mechanics will repair your ABS for a total of $340 to $1100.
Q: Can Low brake fluid cause ABS light to come on?
Yes, when there is insufficient brake fluid in the ABS fluid reservoir, an ABS light will illuminate. You have an abnormally low fluid level, according to the warning light. Check to see if the alert goes away by shutting off the engine and starting it again. If not, look to see if the light is flashing. If so, it indicates that the brake fluid level is only a little bit low.
Q: Can worn brake pads cause ABS light to come on?
Ans: No. The ABS light won’t turn on because your brake pads are worn out. A blown fuse, an irregular wheel sensor, and low brake fluid levels all cause the light to come on. As a safety measure, it’s wise to change old brake pads in order to boost stopping power. To increase your car’s braking effectiveness, replace worn brake lines.
Q: What can cause ABS to fail?
Unless the ABD controller is malfunctioning due to one or more sensors or defective sensor connections, ABS rarely goes wrong. The most frequent reason is that metal shavings, debris, or corrosion have contaminated the sensors. Only after you slam on the brakes and realize that the wheels are locking up as you drive will you become aware of a malfunction.