Starting with the car parked and all doors closed will allow you to reset the maintenance light on your Toyota 4Runner. Don’t start the engine after turning the ignition key. You must press the ignition button twice if your SUV has one, but you must not depress the brake pedal as you would if you were starting the car. Depending on the model year, locate the ODOMETER/TRIP button in the instrument cluster and choose either ODO or TRIP A. Press the push button start once or turn the ignition to the off position. When you restart the ignition, press and hold down the ODOMETER/TRIP button one again. If your car has a push-button ignition, press it twice like you did previously. Keep pushing the ODOMETER/TRIP button, and 000000 MILES will eventually show. The service light ought to turn off. To confirm that the reset was saved, switch the ignition to the off position before starting the car.
Turn the ignition on, then set the odometer to “odo” to reset the maintenance light on a Toyota 4Runner. Switch the ignition off. While turning the ignition back on, push and hold the trip reset button.
In This Article...
How can the maintenance needed light on a 2016 Toyota 4runner be reset?
Usually, even after servicing, a vehicle’s maintenance light needs to be manually reset. So don’t be alarmed; this is very natural.
Follow these fast and simple procedures to reset the maintenance light on your 2016 Toyota 4Runner:
- Alternately, turn the ignition to auxiliary mode or ON. Never start the car.
- To see ODO, press the trip display.
- Switch the ignition to “OFF.”
- While turning your car back on, keep holding down the trip reset button.
Now that the maintenance indicator should be off, you can drive a little more comfortably knowing that your vehicle is up to date.
With Jerry, there is still another method to drive safely. The Jerry app instantly compiles rates from more than 50 leading insurance providers, including Nationwide and Allstate! Once you’ve decided, they even assist you in canceling your old coverage.
On a 2014 Toyota 4runner, how do you turn the maintenance light back on?
Your mechanic most likely failed to reset the maintenance light if it is still on after your car has had a thorough checkup. But don’t panic; by following a few easy actions, you can turn off the maintenance light on your 2014 Toyota 4Runner:
- Turn the ignition key once to start your automobile in auxiliary mode.
- Press and hold the Trip Meter Reset button while you turn off your car. Don’t let it go.
- Holding the button still, restart accessory mode on your vehicle.
- After a time, you ought to notice the odometer readings returning to normal. You can then let off of the Trip button after this has occurred.
You can drive more at ease now that you’ve successfully reset your maintenance light. To see how much you can save on your auto insurance before you head back out, download the Jerry app.
How can I turn off the Toyota maintenance light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
How do you turn off the Toyota Tacoma’s maintenance is required light?
The convenience of having a car-savvy family member must be incredible! Yes, you can manually reset your light as you are aware that your car is in good condition.
Turn off your vehicle, then push and hold the odometer reset button to turn off the maintenance light on a Toyota Tacoma. Odo/Trip is the typical label for this button. Hold the button down as you restart the ignition of your car.
Your maintenance light ought to be back on now! By starting your car as usual and waiting a few seconds, you can ensure that the light remains off. Visit a professional to ensure that your automobile and your sensors are in good working order if the light does indeed come back on.
Although automobile repairs might be expensive, Jerry can help you save money on other auto-related costs. Jerry is a free insurance comparison software that checks around for the best deals with more than 50 different insurance providers. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have. Every year, the typical Jerry user saves $879.
On a 2014 Toyota RAV4, how do you turn the maintenance light back on?
How to Extinguish the Toyota RAV4’s Maintenance Light
- Put the ignition on with your key. Turn the key to the first position.
- On the dashboard, press the reset trip meter button. Hold it down for a couple of seconds.
- Hold the odometer button down for another five or so seconds.
- Release the odometer button after it is off.