I’m aware that the radio’s on/off button may be used to turn off TP by holding it down for two seconds, pressing 4, and then releasing it.
In This Article...
On a car radio, what does TP mean?
This capability enables the transmission of traffic information within the RDS network of a given radio station. The function is active according to the TP symbol.
What does TP on a radio mean?
A traffic announcement (TA) is a particular kind of traffic report that is broadcast on the Radio Data System. Typically, it is used by drivers to aid in route planning and to reduce traffic congestion.
This TA flag can be configured to cause the RDS-enabled receiver to pay extra attention and, among other things, pause the CD, stop the cassette, or retune to get a traffic bulletin. While the TA flag is used to pause the tape or turn up the volume during a traffic bulletin, the associated TP (Traffic Programme) flag allows the user to locate just those stations that frequently broadcast traffic bulletins.
On some contemporary devices, traffic reports can also be recorded and saved internally, both while the device is turned on and for a defined amount of time after the device is turned off. It might also feature built-in timers to find and record the same for two different daily occasions, one setting for before the commute in the morning and the other for the return trip in the evening. The driver can subsequently recall these messages if necessary. TIM, or traffic information message, is the name of this particular function.
How effective are traffic announcements?
The data signal is sent together with the radio signal, which is the short version of the answer. This uses significantly less data and functions very similarly to how teletext on television does. There are many pieces of data that are sent with specific identifiers for each radio station.
On JVC radios, what does TP stand for?
- The “TP indicator is on” message appears when the TP button in FM mode is briefly pressed.
Note:
The TP light flashes when the station being received is not a TP station. Click the
the display, and the search for TP stations begins. “TP is illuminated” when a TP station is tuned in.
- If you wish to pause a TAPE (or CD, KS-FX730R/FX630R only) while you’re playing it, press the
Press the TP button to activate the TA standby mode and listen to a TA broadcast. (The “TP indication lights up.)
In the event that a TA program begins to transmit while the TA standby mode is in effect, “The FM mode is activated, and TRAFFIC is displayed. The TA program can be heard when the volume is turned up to the predetermined “TA VOL” level (see page 14).
In the FM mode, temporarily pressing the PTY button causes
When a PTY station is received, the “PTY indication lights up and the PTY standby mode is activated. For five seconds, the PTY name that is stored on page 9 (for instance, “CLASSICS”) flashes.
The “PTY” sign lights if the station being received is not a PTY station. Click the
shows in the display, and the hunt for PTY stations begins. PTY is lighted when a PTY station is tuned in.
- If you wish to pause a TAPE (or CD, KS-FX730R/FX630R only) while it is playing, press the
Press the PTY button to activate the PTY standby mode and listen to a chosen PTY program. (“PTY” indication flashes.)
The chosen PTY name is shown and the FM mode is activated if the PTY begins transmitting while the PTY standby mode is in effect. Then, the selected PTY is audible.
What does my car radio’s REG button do?
Regionalisation (REG) (REG) The Regional (REG) option prevents the device from switching to a stronger-signal local radio station. You can turn the REG function On or Off from the RDS settings menu. Your chosen local radio station will stay tuned when REG is turned on, even if reception deteriorates.
DAB radio stations: what are they?
Digital radio does not require an internet connection because it is transmitted from a transmission facility. Free is digital radio. Simply make sure that digital radio services are offered where you live before purchasing a digital radio (also known as a DAB+ receiver).
How do I stop my Audi’s traffic updates?
Playback of music and video is halted and traffic reports will interject if the Traffic application is activated. While a traffic report is playing, you can stop it by briefly pressing the ON/OFF button.
If the traffic program is activated and traffic reports will cut in, it will be shown by the display of the TP sign on the MMI screen in Figure 1:
The traffic program feature is activated. Receivable traffic news stations will cut in with traffic reports.
The traffic program feature is activated. It is impossible to hear any traffic news stations. No traffic updates will interrupt.
How does a Pioneer radio work?
Press the SRC/OFF button once to start a Pioneer vehicle radio using the dashboard controls.
Press the SRC/OFF button repeatedly until you find the desired source if your radio isn’t set how you’d like it to be (like Bluetooth, FM radio, AM radio, USB, etc.). Simply press and hold the BAND button with the arrow on it to return to the main menu if you find that you have inadvertently left it.
Press the SRC button once to start the radio using the remote. Similar to how you would use the SRC/OFF button on the dashboard, you may also utilize the SRC button to find the source you want.
Why not spend a moment learning about your insurance alternatives on the Jerry app while you’re learning about your new car stereo? Simply download the app, complete a few questions, and you’ll be able to get a thorough cross-analysis of the top insurance plans from more than 50 providers. Even the phone calls, paperwork, and renewals for your best choice will be handled by Jerry so you don’t have to!
How do you deactivate the radio on a Volkswagen Polo?
Try pressing and holding down the on/off button for a number of minutes. When all else failed to turn off the radio on a Fiat I rented years ago, that method did the trick. Try pressing and holding down the on/off button for a number of minutes.