Size of engine oil: 4.8 quarts (with filter). Check the oil level after refueling.
In This Article...
On a 2010 Toyota Venza, how do you reset the tire pressure light?
Turn the key to the “on” position with the car off, but don’t let it run. When the Toyota tire pressure sensor blinks three times, hold down the TPMS reset button until it stops blinking. Start the car, then let it run for 20 minutes to let the sensor reset. Under the steering wheel is typically where you’ll find the TPMS reset button.
On a Toyota Venza, how do you reset the VSC light?
Vehicle Stability Control, or VSC as it is commonly known, is the stability control system used in Toyota automobiles. By lowering or eliminating the power provided to your wheels, stability control aids in the maintenance of traction and control in your vehicle. By automatically providing brake pressure to up to three wheels, it achieves this. The system’s main objective is to keep your car traveling in the direction of its wheels. Since 2012, at least in the USA, it has become a necessary safety requirement. Naturally, VSC OFF denotes that your Toyota’s stability control is turned off.
VSC Light Easy Fix
Depending on the model year of the Toyota, a button with the same icon as the light in your gauges will be located either next to your shifter or next to your steering wheel. When you’ve found it:
- Ensure that you have come to a complete stop. If you can, put the car in park.
- For a few seconds, hold down the VSC button.
- The indicator lights for TRAC OFF and VSC OFF will turn on. Now both systems are off.
- Once more, press the VSC button. As soon as both lights go out, the systems are back in operation.
If the VSC OFF light is still on, there can be a glitch in your car’s computer or a problem with the VSC system. Bring your car to a Toyota service location near you so a qualified technician can check the codes and identify the problem. Although it is safe to drive your Toyota even with the VSC OFF light on, we advise caution, especially in bad weather.
In Need of Repair?
Bring your car to the Toyota of Arlington servicing facility if you live close to Chicago and need repairs. We can install OEM parts for you because we have access to them. Get a free estimate from our outstanding collision facility if you need body work.
How can my Toyota maintenance be reset?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
How is the oil change light reset?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the stop and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
How can I turn off the Toyota maintenance is required light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
When should my Toyota Venza get its oil changed?
For traditional oil, Toyota suggests changing your Toyota Venza’s oil and filter every 3,000 to 5,000 miles. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles.
Toyota, does it need synthetic oil?
Only Solution. Only Toyota cars (apart from 3UR-FBE Engines*) that require 0w-20 synthetic oil have been given the go-ahead for longer oil change intervals of 10,000 miles or 12 months. (You should, though, keep checking the oil level frequently and topping off as necessary.
Why, when my tires are in good shape, is the tire pressure light on Toyota?
Several cars now come with a built-in tire pressure monitoring system (TPMS). An indication light will flash on your dashboard if the air pressure in your tires drops below the recommended level.
The information system in the dashboard may have a menu that shows you which of the four tires is malfunctioning. The TPMS indicator may be on in a number of circumstances, however your tires may not require replacement or upkeep.
If this occurs and all of your tires seem to be in good condition. This light may illuminate even if your tires are in good condition for a number of different reasons. The decrease in outdoor temperature is one explanation. To double-check and confirm it, it is advisable to maintain a tire pressure gauge in the automobile.
My tires are in good condition, so why is my low tire pressure sign on?
Typically, a tire with an air pressure that is 10% to 15% low will turn on the warning light. The air pressure inside the tires also tends to drop in cold or icy conditions. Short trips in the car will warm up the tires and raise the pressure in them.
What does the Toyota Venza VSC light mean?
The Vehicle Stability Control (VSC) warning light signals a problem with your traction control system, which will result in a temporary loss of VSC and ABS functionality. Additionally, it can show up if you unintentionally pressed the VSC button.
Vehicle stability control, or VSC, is how Toyota and Lexus handle traction control. By lowering the power applied to your wheels, traction control aids in maintaining traction.
The VSC and ABS collaborate. Snow might obstruct the ABS sensors when you’re driving in blizzard conditions, turning on the check VSC system light.
Upon noticing the “When you see the VSC OFF indication on your dashboard, it implies that your traction control is entirely disabled and won’t activate if you lose traction.
Those who drive more recent vehicles can also view the “Instead of the VSC light, check the VSC system Light message on your dashboard.
In a Toyota Venza, what does a red triangle with an exclamation point signify?
A car swerving sign, an exclamation point with a triangle around it, or any combination of the letters TCS (traction control system), ESC (electronic stability control), ESP (electronic stability program), or DSC are used to indicate the presence of traction control (dynamic stability control).
What button is the VSC?
To switch off your TRAC, just push and hold the VSC Off button next to your gear shift. Near your speedometer, look for the TRAC OFF indication light. You will also find your VSC Off indication light here.