On Sienna vehicles made in 2011 and later, the maintenance light can be reset by pressing the Trip button in the cluster when in TRIP A. So let’s go to work straight away.
- Hold it in place until you notice the maintenance light turning off.
- Make sure you are reading TRIP A on the cluster after that.
- Next, extinguish the ignition.
- Step inside the vehicle and start the engine.
- Hold the TRIP/ODO button for a moment, and then turn the ignition back on.
For your information, this procedure is for the Toyota Sienna’s second and third generations (2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 model years). Here, there is a connection to the present model.
In This Article...
How can the maintenance needed light on a Toyota Sienna be reset?
In many vehicles, persistent maintenance lights are a regular problem. Typically, there is no electrical issue; instead, your mechanic just neglected to reset the alert after your service was finished.
Just adhere to these simple steps to reset the maintenance required light on your Toyota Sienna:
- Put your ignition key in accessory mode. You shouldn’t start your engine.
- Find the ODO/TRIP button and press it until ODO appears on the display.
- OFFSET your Sienna.
- As you continue to hold down the ODO/TRIP button, turn on your car.
- You have reset the maintenance light when the odometer display shows just zeros.
- Once more, turn off your car.
Your car is not in need of maintenance, so you can drive with a little more confidence now that the maintenance light is off. Check out the Jerry app to see how much you could be saving on auto insurance before you get back on the road.
After you download Jerry, all you need to do is respond to a few questions that will take you around 45 seconds to do, and you’ll get car insurance rates for coverage that is identical to your current plan right away. Customers of Jerry save $879 year on average.
On a 2015 Toyota Sienna, how do you turn the maintenance light back on?
If mechanics neglect to reset the maintenance alert after servicing the car, it may become an annoyance. Fortunately, a 2015 Toyota Sienna’s maintenance light is simple to reset.
Simply adhere to these guidelines to restart the light:
- To get the Trip A reading, press the trip odometer button on the instrument cluster.
- The maintenance is necessary light needs to be reset.
- A key is turned to the on position. Alternatively, if your vehicle has a push-button start, you can depress the button twice while keeping your foot off the brake.
- In addition to pressing and holding the trip odometer button, restart the engine of the car.
- Shut down the van.
You obviously care about your automobile if you take such good care of your Sienna. Therefore, make sure your car is fully insured without paying too much. It is quick and simple with the Jerry app.
Jerry is a certified insurance broker who obtains rates from numerous reputable and highly rated auto insurance providers. Jerry can assist you in purchasing insurance and terminating your current policy after you discover a fantastic quote for your 2015 Toyota Sienna. Customers often save close to $900 annually!
What does Toyota Sienna’s “maint reqd” mean?
Toyota Maintenance Required Light: This light illuminates to notify you that your oil needs to be changed. 5,000 miles after the last reset, it turns on.
This light only turns on as a result of those miles; it has no means of knowing if your oil has been changed or not since then, and it never, ever indicates a problem.
When changing the oil, shops occasionally forget to reset the maintenance-required meter if the light isn’t yet on. Simply said, many quick-lube businesses are unable to reset it.
Resetting the maintenance needed light is simple. On most Toyotas, you can just:
- Back off the key after that.
- Turn the key back to the “on position, but not all the way to the “start position, while keeping the reset button down. There should be a string of dashes on the odometer display that gradually vanish. A string of zeros will appear after they have all vanished. Hold the reset button down while waiting for the trip meter’s (or the odometer’s) zeros to disappear “A) Reading comes back.
- Next, check to see if the odometer reading is visible. (On some models, the trip-meter is included.) “A that you desire to be visible.)
- Now press and hold the trip meter reset button. (Same button as for switching between the trip meters and the odometer.)
- A key is turned to the on position.
The car should now be counting down to the next 5,000 interval, at which point the maintenance-required signal will turn back on.
What does it imply if your Toyota has a maintenance required light on?
On your dashboard, the Toyota maintenance light may read “MAINT REQD. It’s a light that is always on and alerts you when you require an oil change at a licensed auto shop. Your Toyota will run more smoothly and efficiently if you change the oil in your car.
How can my Toyota maintenance be reset?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
On a 2013 Toyota Tundra, how do you turn the maintenance light back on?
- Without starting the engine, turn the ignition to the “On position. If your car has a push-button ignition, press “Start” without depressing the brake pedal.
- By pushing the display change button or “Trip button,” you can change the display to “Trip A.”
- Completely shut off the car.
- Keep holding down the “Trip button.”
- Hold the “Trip button down while turning the ignition to “On without starting the car.
- Release the “Trip button” whenever the trip meter reads “all zeros.”
Why, after an oil change, is my maintenance required light still on?
Every 4,500 miles, once the maintenance has been reset, the light turns on for around 3 seconds before flashing for approximately 15 seconds. The majority of the time, this merely indicates that your car may need an oil change. After the maintenance data has been reset, the light will turn on and stay on if more than 5,000 miles have been driven.
How to Reset Maintenance Data on Toyota Corolla
You can easily reset your maintenance data. After the necessary maintenance has been carried out in accordance with the maintenance schedule, proceed as follows:
1. Switch the “engine start/stop switch or trip meter-activated engine shutoff a reading appeared,
2. Turn the trip meter reset switch while pressing the “engine switch ON, engine START STOP switch, etc.
3. Hold the button down while continuing to push it until the trip meter reads 000000.
When you understand what each warning light on your Toyota indicates, maintaining it is easy. Never be afraid to call the service staff at Toyota Palo Alto if you ever wonder whether your car needs any type of maintenance. You can ask our helpful staff for assistance in determining what’s wrong with your car and whether you need to schedule a service appointment.