1. switch the ignition to the auxiliary setting
2. Hold down the trip meter button while starting the engine. Maintaining the timing belt warning light blinking requires holding the trip meter button for 5 seconds or longer. Release the trip meter button, then push it once within 5 seconds.
In This Article...
On a 2007 Toyota Hiace, how do you reset the timing belt light?
While turning the ignition on, press and hold the odometer/trip display button. Press and hold the button for five seconds before releasing it. Press and release the button in 5 seconds. The reset value will appear on the display.
How can I tell if my timing belt needs to be replaced?
Your timing belt may be significantly damaged if you hear a ticking sound emanating from the engine of your car. Your car’s timing belt is connected to the crankshaft and camshaft of the engine through a number of pulleys. The connecting rods of the engine, which are connected to the pistons inside the combustion chamber, provide power. The rocker arm assembly and cylinder head valves are controlled by the camshaft, which delivers gasoline to the combustion chamber. The exhaust manifold is the next point of exit for the released gases. Your car’s timing belt may start to twitch inside the engine when it begins to wear out. This can potentially be a symptom of low oil pressure.
What occurs if the timing belt snaps?
The camshaft will stop turning when the timing belt snaps, but the crankshaft will continue to rotate at 1000 revolutions per minute. Because of this, the pistons will keep rising and falling in their cylinders and, occasionally, may hit the valves.
On a Toyota Fortuner, how do you reset the timing belt light?
Hello, at 204 000 kilometers, the timing belt light turned on yesterday. (2012 Fortuner) The light was reset after the old one had been replaced at 150 000 miles. There are no sensors or tools that I am aware of that can activate the T-belt light. Everything seemed to be in order after I opened and examined the timing belt.
Perhaps someone is aware of the potential cause of activation. (The tensioner was used to replace the timing on the 150 000)
The light is set to 150 000 ks when the timing belt is replaced. Whoever reset it simply changed the value to 100,000 ks. The warning indicator lacks a sensor. It merely keeps track of the mileage. To count down the remaining 50 000 ks, just reset the light.
The steps are as follows:
1. Verify that the meter is in ODO mode.
2. Switch the ignition off.
3. While continuing to hold down the trip reset button, turn on the ignition.
4. Press and hold the button for 5 to 10 seconds before letting go.
5. The display will show the number 15. This appears to be the default setting.
6. Now quickly press the button. Every time a button is pressed, the value will increase by 1. Press down consistently until the number 5 shows on the screen. The number should increase to 20, then it should reset to 1. Keep pressing till you see 5 if you missed it the first time.
7. After the right value shows, hold down the button while pressing it until the ODO display reappears.
If you followed the instructions correctly, the Timing Belt light should turn off.
When should a Toyota Hilux’s timing belt be replaced?
Almost every auto owner wonders how frequently they should change their timing belt.
As a result of advancements in both technology and automobiles, several manufacturers now advise intervals of up to 100,000 miles rather than the previous standard of 60,000.
Timing belt replacement for the Toyota Hilux is advised every 100,000 miles or every six years, whichever comes first.
However, this figure may change based on how frequently you drive your car and how much care you give it.
For that extra peace of mind, it can be worthwhile to replace the timing belt sooner if you operate your Hilux frequently and roughly.
How can the timing belt light on a Landcruiser 100 series be turned off?
a) With the ignition ON, flip the display to ODO using the trip switch (select/reset button), then turn the ignition OFF.
b) Press and hold the trip switch for five seconds while turning on the ignition.
d) T-belt mode on the digital display should be activated. The initial display reads “15” (0,000km) (ie. 150,000km).
2. REWRITING SUBSTITUTE VALUES
Each time the trip switch is pressed when the T-Belt mode is engaged, the displayed value is adjusted by 10,000km. After reaching ” 20 ” (200,000km), the display changes back to ” 1 ” (10,000km). Keep in mind that after reset, this counter will start at zero and represents the distance to be traveled before the next light turns on.
I believe the timing belt replacement interval for all 100 series engine variations is 150,000 kilometers, but this should be verified with the servicing recommendations of the various markets. Given this, there shouldn’t be a need for you to alter the default option of “15.”
The ODO is in miles for the US, so it stands to reason that the T-Belt warning would be set at intervals of 10,000 miles.
3. COMPLETION OF T-BELT WARNING RESET
a) After changing the setting value, hold the trip switch ON for at least five seconds before releasing it.
b) Verify that the warning light has turned off when the engine is started and that the display has now reverted back to ODO.
NOTE: The T-Belt warning IS reset if the T-Belt mode is finished even if the belt replacement has not been done.
As usual, everyone takes no responsibility, so I hope this helps. 😉
When should a Toyota Land Cruiser’s timing belt be changed?
Referring to Timing Belt Replacement Although they can last up to 100,000 miles, it’s always a good idea to change them before that. The valves, pistons, and other internal engine components can sustain significant damage in the event of a belt failure.
A Toyota Land Cruiser is what?
The Land Cruiser is a big, full-frame SUV that is more well-liked for its tough off-road prowess than as a suburban family vehicle.
The smooth 5.7-liter V8 in the Land Cruiser delivers strong acceleration but only manages 14 mpg on average.
It’s awkward but safe at its handling limitations, and the stability control puts a lot of effort into maintaining its direction.
Impressive for an SUV capable of traveling off-road is the ride’s continued comfort and composure.
When playing in the mud, full-time 4WD and numerous technical aids, such as a mode that can automatically regulate the power to creep uphill, are helpful.
The third row is small and takes up cargo room since its 50/50 split seats fold up against the sidewalls of the cargo area rather than into the floor.
At 2016, along with a new interior, advanced safety features like blind spot detection and forward collision warning that were anticipated for this price finally surfaced.
The Lexus LX is essentially the same car but has a more opulent interior; due to greater availability, the Lexus may be the better buy on the used market. For 2020, a limited-edition Heritage Edition was introduced; it lacks the ordinary model’s running boards and third-row seat but has unique exterior and interior trim features.
Why do timing belts break down?
We’ve compiled a list of issues and potential causes with ProTorque to assist you in determining the cause of timing belt failure. To prevent your drives from grinding to a halt and preventing unplanned downtime, visually inspect your timing belt drives for these top 6 failure-causing issues.
1. Asymmetry
One of the main reasons why timing belt drives fail is misalignment. Misalignment can be the cause of excessive or uneven tooth wear, belt tracking, and tensile failure. You can extend the life of your timing belts and reduce downtime by inspecting and straightening your shafts and timing pulleys.
Q: What does a bad timing belt sound like?
When a timing belt starts to wear out, it makes a ticking noise in front of your car. When trying to start the engine, the belt will make a whining sound if it eventually fails. A whining sound indicates low engine compression.
Q: How do I know when my timing needs replacement?
A few indications or signals will let you know when it’s time to change your timing belt. Therefore, you should check and replace your timing belt as soon as you observe these symptoms.
- The car won’t crank over. Your engine won’t start if your timing belt breaks. Be aware that a number of factors can prevent your engine from starting.
- Your car is in front of a ticking noise. You might hear ticking sounds as your timing belt begins to fail.
- engine has a misfire. Keep in mind that numerous factors can lead to your engine misfiring.
- The timing belt itself is deteriorated. The ideal time to replace your timing belt is when you become aware of its wear.
- The recommended replacement date has passed for you. You must replace the belt if the manufacturer’s suggested replacement date has passed.
Is there any notice before timing belt breaks?
You should keep an eye out for certain telltale warning indications that your timing belt is likely to fail, such as ticking noises, difficulty starting the vehicle, piston misfires, exhaust smoke, excessive vibrations, and oil leaks.