Starting with the car parked and all doors closed will allow you to reset the maintenance light on your Toyota 4Runner. Don’t start the engine after turning the ignition key. You must press the ignition button twice if your SUV has one, but you must not depress the brake pedal as you would if you were starting the car. Depending on the model year, locate the ODOMETER/TRIP button in the instrument cluster and choose either ODO or TRIP A. Press the push button start once or turn the ignition to the off position. When you restart the ignition, press and hold down the ODOMETER/TRIP button one again. If your car has a push-button ignition, press it twice like you did previously. Keep pushing the ODOMETER/TRIP button, and 000000 MILES will eventually show. The service light ought to turn off. To confirm that the reset was saved, switch the ignition to the off position before starting the car.
Turn the ignition on, then set the odometer to “odo” to reset the maintenance light on a Toyota 4Runner. Switch the ignition off. While turning the ignition back on, push and hold the trip reset button.
In This Article...
How can I turn the 4Runner’s maintenance light back on?
After the last reset, the maintenance light is set to turn on around 7500 miles later. At roughly 5000 miles after the last reset, it will actually begin to remain on longer.
If you perform your own oil changes or if the dealer forgets to reset it, follow these easy procedures.
These recommendations are found in TSB EL002-03:
1. Switch the ignition to the “ON” position. 2. Change the trip/odometer display to “ODO” mode. 3. Switch the ignition to the “OFF” position. 4. Turn the ignition switch to the “ON” position while pressing and holding the Trip Meter “RESET” button. 5. The warning light for servicing and maintenance will:
i. Light up continuously for three seconds ii. Blink for two seconds iii. Light up continuously for one second iv. Cut off
6. Unpress the “RESET” button on the trip meter. 7. Position the ignition switch to “OFF” 8. After switching the ignition to the “ON” position, make sure the service maintenance reminder light has stopped blinking.
How can I turn off the Toyota maintenance light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
How do you turn off the Toyota Tacoma’s maintenance is required light?
The convenience of having a car-savvy family member must be incredible! Yes, you can manually reset your light as you are aware that your car is in good condition.
Turn off your vehicle, then push and hold the odometer reset button to turn off the maintenance light on a Toyota Tacoma. Odo/Trip is the typical label for this button. Hold the button down as you restart the ignition of your car.
Your maintenance light ought to be back on now! By starting your car as usual and waiting a few seconds, you can ensure that the light remains off. Visit a professional to ensure that your automobile and your sensors are in good working order if the light does indeed come back on.
Although automobile repairs might be expensive, Jerry can help you save money on other auto-related costs. Jerry is a free insurance comparison software that checks around for the best deals with more than 50 different insurance providers. You may make adjustments at any time, receive prices instantly, and text an agent with any queries you may have. Every year, the typical Jerry user saves $879.
After an oil change, how do I turn off the maintenance light?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
How is the mileage reset after an oil change?
Get behind the wheel of a pre-2005 GM vehicle, shut the door, turn the ignition to the auxiliary power position, wait for the lights to come on, then quickly depress the accelerator three times within five seconds after turning the key. When the counter has been reset, the oil light should flash.
Use this process on a GM model from 2006 or later, however keep in mind that some cars have slightly different button locations to hit to reset.
Turn the key to the auxiliary power position while sitting behind the wheel and with all the doors closed. After finding the oil life message by scrolling through the options on the Driver Information Center (DIC), press and hold the enter key for one second before letting go. There will be a reset notice on the DIC.
How can you turn off the Toyota RAV4’s maintenance is required light?
How to Extinguish the Toyota RAV4’s Maintenance Light
- Put the ignition on with your key. Turn the key to the first position.
- On the dashboard, press the reset trip meter button. Hold it down for a couple of seconds.
- Hold the odometer button down for another five or so seconds.
- Release the odometer button after it is off.