You may reset the maintenance light on the new Prius using the instructions in this chapter. We’ll use the center and directional pad buttons for entering, and we’ll also be looking at a heads-up display. The only thing left to accomplish is:
- Prior to starting your vehicle, turn it on.
- Okay, start the engine and perform one final check to ensure the oil light has been turned off.
- Hit enter after selecting the OIL MAINTENANCE from there.
- Next, proceed to scroll left or right to locate the gear
- Then, on the MAINTENANCE SYSTEM, press enter once more.
- When the message appears, simply click again to address it and return to the main screen.
- Hit enter after finding VEHICLE SETTINGS by scrolling down till you do.
- It will now prompt you to reset; simply click YES to proceed.
In This Article...
For Prius V (2016-2017)
- After that, tap the settings button to the left to access the sprocket.
- Press enter after that, then scroll down to MAINTENANCE SYSTEM.
- You then click the middle button to access the menu.
- It will now ask you if you wish to initialize the system; select YES to finish.
- Make sure the ignition switch is turned on.
That concludes it, and you are done. I don’t have to deal with it flashing at the beginning of the engine every time I start the car, and I’m good to go until the next oil change from Toyota service. I hope this article was helpful to you. Any inquiries can be left in the comments section below. Have a great day and thanks for reading.
On a 2010 Prius, how do you reset the oil maintenance light?
If you often perform maintenance on your 2010 Toyota Prius, the tiny maintenance required light might become very aggravating. It will only take a few minutes to correct, though, and is extremely simple. Follow these steps to reset the oil maintenance light on a 2010 Toyota Prius:
- Resetting oil maintenance data should be visible on the display.
- While pushing the push-button start twice, press and hold the mph button that is immediately above it.
- Press the push-button start once to turn the car off.
- As you double-tap the start button, keep your foot off the brake.
- The primary display should turn on in the center of the dashboard.
- To get to Trip A, push the Trip button on the steering wheel.
It’s best to get regular oil changes to keep your Prius in good condition. You may also reset the maintenance light in a matter of minutes. But did you know that by downloading the Jerry app and comparing prices, you can also save hundreds on auto insurance in only a few minutes?
Jerry is a certified insurance broker who offers estimates from numerous reputable and highly rated auto insurance providers. Jerry can assist you in purchasing insurance and terminating your current policy after you discover a fantastic cost for your Toyota Prius. Customers often save close to $900 annually!
How can the maintenance needed light on a 2010 Toyota be reset?
How Can the Maintenance Required Light Be Reset?
- Turn on your car. Look at your dashboard when your key is in the on position.
- Press the Trip Meter Reset Button after turning off the engine.
- Re-start the vehicle.
- Keep pressing the reset button.
- Reset button released
How often should the oil be changed in a 2012 Prius?
Normally, synthetic oil needs to be changed every 7,500 to 10,000 miles. For conventional oil, Toyota advises changing your 2012 Toyota Prius’s oil and filter every 3,0005,000 miles.