Three minutes are required.
All right, I’ll demonstrate how to reset the t-belt light on this 2009 Toyota Land Cruiser. The only thing left to accomplish is:
- At this point, turn the ignition on and begin.
- Access the ODO screen.
You then push the TRIP button to cycle through, arriving at the ODO reading shown.
- Deactivate the ignition.
- As you depress the TRIP button, start the engine.
Next, while turning the ignition on but not starting the engine, we’ll press and hold the TRIP button.
- Hold the TRIP button down for an additional five seconds.
- Press the button once, then release it.
- Hold the button down one more.
After removing your finger, press the button for an additional five seconds to complete the action.
For your information, this procedure was successful for the Toyota Land Cruiser J200, but I believe it will also be successful for other models (2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 model years).
The timing belt light was so reset in this manner. I hope this was helpful. If it did, don’t forget to tell your friend about it. Please feel free to ask any queries you may have regarding the service in the comments section. We appreciate your time and will speak with you again soon.
In This Article...
How does a Landcruiser’s T-belt get reset?
a) With the ignition ON, flip the display to ODO using the trip switch (select/reset button), then turn the ignition OFF.
b) Press and hold the trip switch for five seconds while turning on the ignition.
d) T-belt mode on the digital display should be activated. The initial display reads “15” (0,000km) (ie. 150,000km).
2. REWRITING SUBSTITUTE VALUES
Each time the trip switch is pressed when the T-Belt mode is engaged, the displayed value is adjusted by 10,000km. After reaching ” 20 ” (200,000km), the display changes back to ” 1 ” (10,000km). Keep in mind that after reset, this counter will start at zero and represents the distance to be traveled before the next light turns on.
I believe the timing belt replacement interval for all 100 series engine variations is 150,000 kilometers, but this should be verified with the servicing recommendations of the various markets. Given this, there shouldn’t be a need for you to alter the default option of “15.”
The ODO is in miles for the US, so it stands to reason that the T-Belt warning would be set at intervals of 10,000 miles.
3. COMPLETION OF T-BELT WARNING RESET
a) After changing the setting value, hold the trip switch ON for at least five seconds before releasing it.
b) Verify that the warning light has turned off when the engine is started and that the display has now reverted back to ODO.
NOTE: The T-Belt warning IS reset if the T-Belt mode is finished even if the belt replacement has not been done.
As usual, everyone takes no responsibility, so I hope this helps. 😉
When should a Toyota Land Cruiser’s timing belt be changed?
Referring to Timing Belt Replacement Although they can last up to 100,000 miles, it’s always a good idea to change them before that. The valves, pistons, and other internal engine components can sustain significant damage in the event of a belt failure.
On a Toyota Fortuner, how do you reset the timing belt light?
Hello, at 204 000 kilometers, the timing belt light turned on yesterday. (2012 Fortuner) The light was reset after the old one had been replaced at 150 000 miles. There are no sensors or tools that I am aware of that can activate the T-belt light. Everything seemed to be in order after I opened and examined the timing belt.
Perhaps someone is aware of the potential cause of activation. (The tensioner was used to replace the timing on the 150 000)
The light is set to 150 000 ks when the timing belt is replaced. Whoever reset it simply changed the value to 100,000 ks. The warning indicator lacks a sensor. It merely keeps track of the mileage. To count down the remaining 50 000 ks, just reset the light.
The steps are as follows:
1. Verify that the meter is in ODO mode.
2. Switch the ignition off.
3. While continuing to hold down the trip reset button, turn on the ignition.
4. Press and hold the button for 5 to 10 seconds before letting go.
5. The display will show the number 15. This appears to be the default setting.
6. Now quickly press the button. Every time a button is pressed, the value will increase by 1. Press down consistently until the number 5 shows on the screen. The number should increase to 20, then it should reset to 1. Keep pressing till you see 5 if you missed it the first time.
7. After the right value shows, hold down the button while pressing it until the ODO display reappears.
If you followed the instructions correctly, the Timing Belt light should turn off.
A Toyota Land Cruiser is what?
The Land Cruiser is a big, full-frame SUV that is more well-liked for its tough off-road prowess than as a suburban family vehicle.
The smooth 5.7-liter V8 in the Land Cruiser delivers strong acceleration but only manages 14 mpg on average.
It’s awkward but safe at its handling limitations, and the stability control puts a lot of effort into maintaining its direction.
Impressive for an SUV capable of traveling off-road is the ride’s continued comfort and composure.
When playing in the mud, full-time 4WD and numerous technical aids, such as a mode that can automatically regulate the power to creep uphill, are helpful.
The third row is small and takes up cargo room since its 50/50 split seats fold up against the sidewalls of the cargo area rather than into the floor.
At 2016, along with a new interior, advanced safety features like blind spot detection and forward collision warning that were anticipated for this price finally surfaced.
The Lexus LX is essentially the same car but has a more opulent interior; due to greater availability, the Lexus may be the better buy on the used market. For 2020, a limited-edition Heritage Edition was introduced; it lacks the ordinary model’s running boards and third-row seat but has unique exterior and interior trim features.
What does the term “T belt” mean?
: a belt that synchronizes the opening and closing of the engine’s valves and connects the camshaft and crankshaft in an automotive engine.
Honda advises replacing the timing belt after 105,000 miles. Mr. Paul Even though the timing belt is more smaller and less expensive than a gearbox or an engine, it is nevertheless a crucial component of an automobile. Stephanie Thompson a time comparison
Can you operate a vehicle with the timing belt light on?
With a broken timing belt, your automobile cannot operate. You won’t be able to drive at all by the time the belt snaps because the harm has already been done. The vehicle will need to be towed to an auto repair facility.
What occurs if your car requires a new timing belt?
Your car’s engine won’t start or turn over properly if the timing belt is damaged or nonreplaceable. As a result, even though you might hear the starter motor turn on when you turn the key, it won’t fully ignite because the timing belt is what drives the crank and shaft. You won’t be able to operate your car at all if your timing belt breaks. The timing belt frequently fails when the car is in motion. Rocker arms, push rods, and valves on cylinder heads may sustain catastrophic damage as a result.
When should a Toyota Prado’s timing belt be replaced?
Since the Prado V6 has a chain, you won’t need to change it as frequently as you would if it had a belt. Because of this, the manual makes no mention of it. The radiator hoses shouldn’t cause you too much anxiety, but you should check them for signs of perishing or cracking and replace them if necessary.
How is the time changed on a Toyota Prado?
Every year, British Summer Time (BST) and Greenwich Mean Time (GMT) are switched between the UK clocks, making it difficult for us to remember how to change the time on the digital clock in our automobiles.
Remembering which button does what in your car’s cabin can be challenging. It may be simple to remember to add an hour on the last Sunday in March and subtract an hour on the last Sunday in October.
Here is how to change the clock in any current Toyota model to help make your life a little bit easier.
Most recent models include clocks that are part of the multi-information display and can be changed using the in-car settings. However, some people continue to utilize traditional buttons.
Adjusting the time using physical buttons
The central console’s physical clock adjustment controls, which are situated on this particular model just beneath the clock display, are now only found on the Land Cruiser model.
Three buttons are located here: “H,” “M,” and “:00.” The ‘H’ and ‘M’ buttons advance the clock by one hour and one minute, respectively, when pressed. The button marked “:00” rounds to the nearest hour.
Adjusting the time using in-car menus
To reach the proper settings menu on models where the clock is a component of the multi-information display in the instrument cluster, utilize the steering wheel buttons.
Start by pressing and holding the ‘DISP’ button on the steering wheel to activate the adjustment mode while your car is still moving.
By pushing and holding the “DISP” button, choose “CLOCK.” Every time you push the “DISP” button, the hours will be highlighted and the clock will go forward by one hour. Use the same procedure to set the minutes after waiting five seconds to validate the hours. Wait five more seconds after setting the minutes before checking the time.
The Aygo equipped with a multimedia system similarly has a menu-based method for changing the clock. Press the “Menu/Select” knob to start, then choose “SETUP,” “GENERAL,” and “Clock” from the menu that appears on the screen. The next page allows you to change the 12- or 24-hour time format as well as cycle through the hours and minutes and set the minutes to 00.
What if I own an older Toyota?
The majority of Toyotas from recent years should be covered by the instructions above. The MyToyota owner’s portal makes it easy to download an owner’s manual for your specific vehicle if you need more detailed instructions. If you haven’t already created a MyToyota account, do so now, register your car, and you can immediately get the appropriate manual for your vehicle.