You must replace the oil and use synthetic SAE 0W-20 if your Toyota Tacoma’s maintenance light illuminates. Here’s how to reset the maintenance light if You’ve already done that and need to. Don’t start the engine while you turn the ignition on. Make that the miles, not the trip meters, are displayed on the odometer. If so, press the trip meter reset button after turning the car back off. Hold it down and restart Your Toyota (Again, not starting the engine). If you keep holding the trip meter reset button while doing this, you should see the odometer begin to show a sequence of dashes on the screen. These will change to zeros. Release the reset button once those vanish and the regular odometer numbers appear on your screen. The maintenance button should have vanished by this time, and you shouldn’t see it again until you’ve covered another 5,000 miles.
The rest oil light shows that it’s time for an oil change. Turn the ignition to the on position without starting the engine to reset the light. Turn off the ignition, push and hold the trip odometer reset button, and then press the odometer to trip.
Your oil change reset is located on the multi-display screen in your dash. The factory recommends that Tacomas manufactured in 2016 and after have their oil changed every 5,000 miles. Your maintenance handbook and online resources contain every detail.
In This Article...
How can the maintenance needed light on a 2015 Toyota Tacoma be reset?
How Can the Maintenance Required Light Be Reset?
- Turn on your car. Look at your dashboard when your key is in the on position.
- Press the Trip Meter Reset Button after turning off the engine.
- Re-start the vehicle.
- Keep pressing the reset button.
- Reset button released
How can I dim the maintenance is necessary light?
How do I turn the “Maint Reqd” light back on?
- Switch the ignition to the ON position.
- Set the trip display to TRIP A mode on the odometer.
- Activate the OFF position on the ignition switch.
- Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
- It will do so via the service maintenance reminder light.
How do you turn off the maintenance light on a third-generation Toyota Tacoma?
Press and hold the trip meter reset nob (located next to your Toyota Tacoma’s odometer) to reset the light. Turn the ignition to “ON” while holding the trip meter reset knob, but do not start your Toyota Tacoma. Keep pressing the meter reset button until the MAINT REQD light goes off.
How can the oil light on a 2005 Toyota Tacoma be reset?
- Make sure the tripmeter is lit up on the vehicle’s odometer when the ignition is in the ON position, then switch it to the OFF position.
- Press and hold the MODE or TRIP reset button.
- Switch the ignition to the ON position while holding the reset button.
**To activate the Key On/Engine Off mode using the Engine Start/Stop button, depress the button twice while keeping your foot off the brake pedal.
- Hold the reset button down until the odometer shows “000000 is shown before the initial value.
- Ensure the reset was acknowledged by turning the vehicle on and off again.
- Make that the odometer is shown with the ignition switch in the ON position, then switch it to the OFF position.
- Hold the reset button down until the odometer shows “the MAINT REQD light flashes, or 000000
These reset instructions should be useful to you, we hope. With our mobile app Oil Reset Pro, which is available in the Apple and Google Play stores, you can always have this method at your fingertips along with the rest of the domestic, Asian, and European manual maintenance reset procedures. To get a free download from the shop right away, click the links below.
On a 2005 Toyota Tacoma, how do you turn off the check engine light?
response given by
- Step 1 is to raise the hood.
- Disconnect the negative battery terminal in step two.
- Step 3: To clear the computer’s memory, depress the brake pedal for roughly a minute.
- Step 4: Start your car after reconnecting the negative battery terminal.
- HOWEVER: What does the check engine light actually mean?