My Toyota Sienna’s maintenance required light has been giving me some trouble. The automobile has already been serviced, but the light won’t go out. How can I manually reset the maintenance light?
In less than two minutes, find out if your auto insurance is being overcharged.
In This Article...
How can you turn a 2011 Toyota’s maintenance light back on?
Press the odometer button on your dashboard quickly, hold it there while turning the key to the second position. Hold the odometer button down for a further 10 seconds. You can hear a beeping noise in addition to the maintenance light beginning to flash. The light ought should thereafter go out.
How can my oil life be reset?
- Look around the dashboard and gauges of your car for a button, switch, or stick that says “Reset.”
- Don’t start the engine; instead, turn the ignition to the ON position to turn on your gauges and electronics.
Hold the Reset Button and Turn the Key
- Holding down the reset button, turn the ignition back to the ON position.
- To reset, press and hold the button.
- Release the reset button after a brief period of the light blinking ON and OFF, and then turn the ignition OFF.
- Keep a close eye on the maintenance or oil change light. It ought to begin to flicker.
Start the Vehicle
- For more details on the procedure for your vehicle, consult your owner’s manual or the website of the automobile manufacturer if the dashboard light is still ON after two attempts.
- Repeat the reset process if it’s still on.
- Check that the maintenance or oil change light is currently off before starting the engine.
On a 2018 Toyota Sienna, how do you turn the maintenance light back on?
Don’t worry; it’s a simple fix, and our wife won’t know the difference! By doing the following, you can clear the maintenance light on your 2018 Toyota Sienna:
- The oil light should be off when you start your automobile.
- Using the navigation buttons on the right side of your steering wheel, locate the Settings menu.
- To confirm your selection, click YES when prompted.
- Set your ignition to ON while your car is in park. All of the lights in your automobile will be turned on, but the engine won’t start. Push the start button twice without applying the brake if your Sienna has one.
- By clicking OK, select MAINTENANCE RESET.
If the indicator continues to illuminate, your car might be having trouble. Perhaps your wife accidently moved the sensor, or perhaps there is a completely separate issue. In either case, it’s a good idea to consult an expert to make sure your automobile is secure, particularly if the light comes back on.
Why not take a moment to make sure your automobile is covered by a reliable insurance policy while you’re learning more about it? Using the Jerry app, finding the best insurance is quick and easy. Download the app, then select from a wide selection of free quotes after quickly answering a few questions. Jerry drivers save $879 annually on auto insurance.
How can you turn a Toyota’s oil change light back on?
In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.
How can I turn off the Toyota maintenance is required light?
Turn the key to position two while pressing and holding the odometer button on the dashboard. When the maintenance light begins to flash, keep holding the odometer button. There may even be beeping sounds. The light ought to dim.
Automatic Transmission Oil Capacity
Depending on the automatic gearbox, the 2016 Toyota Sienna can hold 6.9 or 7.1 quarts (6.53 or 6.72 liters) of automatic transmission oil.