A Toyota Prius’ maintenance light can be reset easily and quickly in a matter of minutes. Start by parking the car and closing all of the doors. Don’t start the engine while turning the ignition key to the ON position. If your ignition is a push button, you must press the start/stop button twice without applying the brake. To access the settings menu, use the arrow navigation buttons in the left cluster of steering wheel controls. Select OK once you’ve navigated to the menu for the car settings. Select MAINTENANCE SYSTEM, then hit OK. Look for OIL MAINTENANCE on that menu, then hit OK once again. When a confirmation notice appears, choose YES, and then click OK. To confirm that the reset has been retained, turn off the ignition and then start the car.
Toyota Priuses’ “maintenance required” light can be reset by pressing the power button twice, the odometer button, which is located below the multifunction display, once to turn the vehicle off, the odometer button, while holding it down, and the power button twice (2 times), all while keeping your foot off the brake. Hold the odometer button down while you wait for the flashing dashes to stop and the reading to return.
For a 2014 Prius, turn the trip odometer to “trip A,” start the vehicle, push and hold the MPH/KMH button, turn the ignition off while holding the button, turn the ignition back on while holding the button, and watch the reset take place.
Thank you for your clear instructions; I was able to accomplish what the Toyota Service Department failed to do.
In This Article...
On a 2010 Prius, how do you reset the oil maintenance light?
If you often perform maintenance on your 2010 Toyota Prius, the tiny maintenance required light might become very aggravating. It will only take a few minutes to correct, though, and is extremely simple. Follow these steps to reset the oil maintenance light on a 2010 Toyota Prius:
- Resetting oil maintenance data should be visible on the display.
- As you double-tap the start button, keep your foot off the brake.
- The primary display should turn on in the center of the dashboard.
- To get to Trip A, push the Trip button on the steering wheel.
- Press the push-button start once to turn the car off.
- While pushing the push-button start twice, press and hold the mph button that is immediately above it.
It’s best to get regular oil changes to keep your Prius in good condition. You may also reset the maintenance light in a matter of minutes. But did you know that by downloading the Jerry app and comparing prices, you can also save hundreds on auto insurance in only a few minutes?
Jerry is a certified insurance broker who offers estimates from numerous reputable and highly rated auto insurance providers. Jerry can assist you in purchasing insurance and terminating your current policy after you discover a fantastic cost for your Toyota Prius. Customers often save close to $900 annually!
How can the maintenance needed light on a 2010 Toyota be reset?
How Can the Maintenance Required Light Be Reset?
- Turn on your car. Look at your dashboard when your key is in the on position.
- Press the Trip Meter Reset Button after turning off the engine.
- Re-start the vehicle.
- Keep pressing the reset button.
- Reset button released
After an oil change, how do you turn off the maintenance is necessary light?
Switch the ignition to the ON position. Set the trip display to TRIP A mode on the odometer. Activate the OFF position on the ignition switch. Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
How is the oil change light reset?
Reset Oil Change Indicator
- Turn on the ignition.
- Both the brake and accelerator pedals should be fully depressed.
- Maintain firm pressure on the brake and accelerator pedals.
- A notice verifying the reset process is ongoing appears after three seconds.
Can a Prius be operated while in maintenance mode?
The most efficient way to operate any car, whether it is a hybrid, electric, or gas-powered, is to drive more slowly. If you have a choice between several driving routes, pick the one with the fewest stops, the longest stretches, and a 45 mph speed restriction or less. When you approach the speed limit, release your foot from the gas or accelerator pedal and let the vehicle continue on with the least amount of acceleration.
WHICH MODE, PROCESS, SETTING, OR SYSTEM IS BEST FOR DRIVING A TOYOTA PRIUS OR HYBRID?
Today’s cars often have features that let the driver alter how the car behaves in various conditions. When attempting to increase fuel efficiency, the Eco mode is recommended. The accelerator, auto chips, and the onboard computer system all play a role in this. Torque will be produced by the system more gently than usual.
Through auto chips and relays, the driver can modify the vehicle’s engine and onboard computer system in eco mode to better regulate the vehicle’s acceleration. Through acceleration, this makes the car more fuel-efficient and provides a highly smooth ride. We are unaware of any car mechanics who believe that continuously using Eco Mode is harmful.
This question’s response depends on a wide range of variables. the Toyota Prius’s model year, the car’s condition, the road’s conditions, the weather, the vehicle’s speed, the car’s age and maintenance, and more. The answer is roughly 25 miles in ideal circumstances.
When neither the Eco Mode nor the Power Mode is selected, normal mode is in use. You may tell this by looking at the instrument cluster lights; the Eco or Power Mode light won’t be on.
We advise against using the maintenance mode while driving unless absolutely necessary. Be extremely cautious when using your vehicle in maintenance mode. Traction and other self-preservation and components will be disabled, and the vehicle will idling. Driving your Toyota Prius while it is in maintenance mode increases the risk of structural and inverter damage.
What is a Toyota Prius’ maintenance schedule?
Toyota typically advises owners to make a service visit every 5000 miles or every six months, whichever comes first.